1、 TIASTANDARDFOTP-193Polarization Crossstalk Method forPolarization-Maintaining OpticalFiber and ComponentsTIA-455-193May 1999TELECOMMUNICATIONS INDUSTRY ASSOCIRepresenting the telecommunications industry inassociation with the Electronic Industries Alliance ANSI/TIA/EIA-455-193-1999Approved: May 12,
2、 1999Reaffirmed: May 10, 2005 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through
3、 eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications s
4、hall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internatio
5、nally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. T
6、his Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations befo
7、re its use. (From Standards Proposal No. 3-3782-RF1, formulated under the cognizance of the TIA FO-4.2 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please r
8、efer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserve
9、d Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard c
10、opy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are loca
11、ted at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed
12、 in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR
13、 consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the sc
14、ope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant
15、 or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, design
16、s or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTA
17、BILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE
18、 SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WI
19、THOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVI
20、SED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot
21、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455-193iTIA-455-193Polarization crosstalk method for polarization-maintaining optical fiberand componentsContents1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、. . . . . . . . . . . 12 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Sampling and specimens. . . . .
23、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24、 . . . . . . . . . . . . . . .67 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 Specification information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Annex A Source coherence len
25、gth criterion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Annex B Comparison between this standard and IEC or ITU Standards. . . . . . . . . . . .8Figure 1 Polarization-crosstalk measurement system schematic . . . . . . . . . . . . . . . . 5Copyright Telecommunications Industry A
26、ssociation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455-193iiThis page left blankCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking per
27、mitted without license from IHS-,-,-TIA-455-193iii_Foreword_This Standard comes from TIA Project No. 3782 and was formulated under thecognizance of TIA joint working group FO-6.6.3/6.9.3. This FOTP is part of a series of test procedures included within RecommendedStandard EIA/TIA-455.This Standard d
28、escribes a new test method. There two annexes to this Standard: oneis normative and the other informative.Key words: polarization crosstalk, polarization-maintaining optical fiber, pmcomponent, pm fiber.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for R
29、esaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455-193ivThis page left blank.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455-1931FOTP-193P
30、olarization crosstalk test method for polarization-maintaining optical fiberand components_1 Introduction_1.1 IntentThis Standard specifies a method of measuring the polarization crosstalk of singlemode, highly linearly-birefringent (commonly called polarization-maintaining or PM)optical fiber and c
31、omponents. This Standard is applicable to fibers and componentshaving connectors attached to one or both ends, and to two or more such entitiesjoined in series. This Standard may also have application to other devices constructedfrom polarization-maintaining fibers and/or components. Hereafter both
32、PM fibers andPM components will be referred to as specimens.In the case of fiber, if the ends do not have connectors the crosstalk tends to beproportional to fiber length. In such cases the proportionality constant, commonlyreferred to as the “h-parameter,” is another measure of performance. The tes
33、t methodfor measuring the h-parameter is the subject of FOTP-192. In theory, if perfectly linearly polarized light is launched into a Specimen with its planeof polarization exactly aligned to either of the devices principal axes, then the lightradiated at the distal end will also be perfectly polari
34、zed. In practice, some light may becoupled to the not-launched polarization by the Specimen or by connectors attached toits ends, so that at the distal end a small, unintended, component is present. ThisStandard describes a test method for measuring this imperfection.1.2 DefinitionsFor the purposes
35、of this Standard, the following definitions apply.Birefringent material. A material in which orthogonal polarizations propagate atdifferent speeds. A linearly birefringent material is one in which the orthogonalpolarizations are linear. Materials may also be circularly or elliptically birefringent.P
36、rincipal optical axes. The axes for which the speed of light in a linearly birefringentmaterial is a maximum or a minimum.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455
37、-1932Polarizer/analyzer. Optical elements designed to transmit light of a single polarizationstate - most commonly, a linear state. When a polarizer is placed at the output of anoptical system, it is called an analyzer.Extinction. The ratio of the optical power passed in the transmitted polarization
38、 stateto the power passed in the orthogonal polarization state. The extinction of a polarizingelement is measured with unpolarized light incident. Polarization crosstalk. The ratio of the power that crosses over to the initiallyunexcited polarization state to the power that remains in the initially
39、excited state (bothpowers measured at the elements distal end). The polarization crosstalk of abirefringent element is measured with polarized light, aligned to be parallel to either ofthe elements principal axes, incident. Coherence length. The coherence length, lc, of an optical light source shall
40、 be definedby the following relation:lc = 2/ (1)where is the center wavelength of the light source; is the line-width of the light source at the -3 dB intensity level.Beat length. The length of fiber needed to create a 2pi phase difference betweenorthogonal polarization states. It can be expressed b
41、y the following relation:LB = /B (4)where is the center wavelength of the source;B is the birefringence of the fiber given as (ne no)ne is the extraordinary refractive index of the specimenno is the ordinary refractive index of the specimen.h-parameter. A length normalized form of polarization cross
42、talk. h has units of inversemeters and is given by the equationh = 1/L tanh-1(Pmin/Pmax) (2)where L is the fiber length; Pmax and Pmin are the portion of the emitted power withpolarization plane parallel and orthogonal, respectively, to the excited axis.Copyright Telecommunications Industry Associat
43、ion Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-455-1933The plane of polarization of the light launched into the fiber is parallel to either principaloptical axis, The function tanh-1() is the inverse hyperbolic tangent
44、. For Pmin/Pmax lessthan 0.1, a sufficient approximation to the above equation ish = (Pmin/Pmax)/L. (2)_2 Normative references_The following standards contain provisions that, through reference in this text,constitute provisions of this Standard. At the time of publication, the editions indicatedwer
45、e valid. All standards are subject to revision, and parties to agreements based onthis Standard are encouraged to investigate the possibility of applying the most recenteditions of the standards indicated below. ANSI and TIA maintain registers of currentlyvalid national standards published by them.A
46、NSI/TIA/EIA 440-A Fiber Optic TerminologyANSI/TIA/EIA 455-A Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic ComponentsANSI/TIA/EIA 4920000-A Generic Specification for Optical Waveguide FibersANSI/TIA/EIA 455-80B
47、Cut-off Wavelength Measurement ProcedureANSI/TIA/EIA 455-57 Optical Fiber End Preparation and ExaminationANSI/TIA/EIA 455-192 h-parameter Test Method for Polarization-maintainingOptical Fiber_3 Apparatus_3.1 Light sourceThe optical power and wavelength of the light source must be either stable over theduration of t
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1