TIA-598-D-1-2018 Optical Fiber Color Coding in Cable- Addendum 1 Additional Colors for Elements 13-16 (Addendum to TIA-598-D).pdf

1、 TIA-598-D-1 (Addendum to TIA-598-D) August 2018Optical Fiber Color Coding in Cable- Addendum 1, Additional Colors for Elements 13-16 ANSI/TIA-598-D-1-2018 APPROVED: AUGUST 10, 2018 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misund

2、erstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any res

3、pect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards an

4、d Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does n

5、ot purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use

6、 of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-598-D-1-R2, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Syst

7、ems, TR-42.12 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STAND

8、ARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by TIA. Reproduction of these documents ei

9、ther in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission

10、. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may b

11、e amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or i

12、nvestigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to inves

13、tigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discri

14、minatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engag

15、ed in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA

16、disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential P

17、atent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or mon

18、itor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL W

19、ARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND M

20、AKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE

21、FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETH

22、ER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISH

23、ED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-598-D-1 iii FOREWORD (This foreword is not part of this Standard.) This Standard provides all necessary information for color coding optical fiber cables in a uniform manner using additional, alternative colors. This Standard was formulated as TIA Standar

24、ds Proposal number ANSI/TIA-PN-598-D-1 under the cognizance of TIA TR-42.12, Subcommittee on Optical Fibers and Cables. This first Addendum augments ANSI/TIA-598-D, 2014. This Addendum defines four new colors and color order for use in cabling architectures utilizing 16 elements in the base unit. Su

25、ch elements include fibers, units and groups. It also defines modifications to the coding system of TIA-598-D (and later) for element numbers beyond 16 when using the 16-element base unit. The colors and coding of this Addendum are alternative, but specify the attributes of such colors and coding wh

26、en a 16-element base is used. This Addendum will become part of TIA-598 upon the next revision. The organization of this addendum is consistent with the organization of TIA-598-D, reflecting the clause and table numbering. The notes in text are to explain changes from TIA-598-D when using this adden

27、dum. Key words: fiber identification, color identification, identification scheme ANSI/TIA-598-D-1 iv This page left blank. ANSI/TIA-598-D-1 1 Optical Fiber Color Coding in Cable Addendum 1 Additional Colors for Fibers 13-16 1 Scope This Addendum defines the recommended identification scheme or syst

28、em for cable architectures which use 16 elements in the base unit. Such elements include individual fibers, fiber units, and groups of fiber units. The 12 colors defined in TIA-598-D are used with the addition of four colors which apply to elements 13 through 16. The methods contained herein may be

29、used to identify and locate specific elements for the purpose of connection, termination, or testing. 2 Normative references The following standards contain provisions which, through references in this text, constitute provisions of this Standard. At the time of publication, the editions indicated w

30、ere valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards published by t

31、hem. ANSI/TIA-598-D-2014 Optical Fiber Cable Color Coding ANSI/TIA-598-D-1 2 3 Fiber, unit, and group color coding 3.1 Individual fibers Note TIA-598-D Clause 3.1 is replaced with the following: All fibers shall be discernibly and uniquely color coded using the preferred method in accordance with on

32、e of the alternatives given in Table 1a for up to 12 fibers in a fiber unit, or Table 1b for the case of 16 fibers in a fiber unit, or the surrogate method given in Annex C (informative), Table C-1. The identification may be by coloring, by printed legend, by printed block coding, or by other unique

33、 methods meeting the intent of this Paragraph and as agreed upon by the manufacturer and the user. If a printed legend is used in lieu of actual color coding for identification, the legend shall consist of the numerical position number or the color abbreviation, or both, as listed in Table 1a or Tab

34、le 1b, as appropriate. If printed block coding is used, it shall consist of printed blocks and bar or hachure marks corresponding to the numerical position. A sample scheme is illustrated in Table 2; this marking scheme may be extended as necessary. Note - The alternative color scheme given in TIA-5

35、98-D, Annex C (informative), Table C-1, may be used for the 12-fiber color scheme, but is not used for the 16-fiber color scheme, as there is no definition for these colors 13 through 16. 3.2 Fiber units Note - The last sentence of TIA-598-D Clause 3.2 is replaced with the following: When a number o

36、f fibers (e.g., 6, 12, 18, or 24) form a unit, the unit shall be uniquely identified in accordance with one of the alternatives given in Table 1a, Table 1b, or Table C-1 as described in Clause 3.1. 3.3 Fiber groups Note - The last sentence of Clause 3.3 is replaced with the following: When a number

37、of units form a group, the group may be uniquely identified in accordance with one of the alternatives given in Table 1a, Table 1b, or Table C-1 as described in Clause 3.1. Note TIA-598-D Table 1 is renumbered as Table 1a, below, with a modified title as indicated. Table 1b is added. ANSI/TIA-598-D-

38、1 3 Table 1a - Individual fiber, unit, and group identification for case of up to 12 elements in each set Position # Base color/tracer per TIA Abbreviation/print legend 1 2 3 4 Blue Orange Green Brown 1 or BL or 1-BL 2 or OR or 2-OR 3 or GR or 3-GR 4 or BR or 4-BR 5 6 7 8 Slate White Red Black 5 or

39、SL or 5-SL 6 or WH or 6-WH 7 or RD or 7-RD 8 or BK or 8-BK 9 10 11 12 Yellow Violet Rose Aqua 9 or YL or 9-YL 10 or VI or 10-VI 11 or RS or 11-RS 12 or AQ or 12-AQ 13 14 15 16 Blue with Black tracer Orange with Black tracer Green with Black tracer Brown with Black tracer 13 or D/BL or 13-D/BL a) 14

40、or D/OR or 14-D/OR 15 or D/GR or 15-D/GR 16 or D/BR or 16-D/BR 17 18 19 20 Slate with Black tracer White with Black tracer Red with Black tracer Black with White tracer b) 17 or D/SL or 17-D/SL 18 or D/WH or 18-D/WH 19 or D/RD or 19-D/RD 20 or D/BK or 20-D/BK 21 22 23 24 Yellow with Black tracer Vio

41、let with Black tracer Rose with Black tracer Aqua with Black tracer 21 or D/YL or 21-D/YL 22 or D/VI or 22-D/VI 23 or D/RS or 23-D/RS 24 or D/AQ or 24-D/AQ 25 26 27 28 Blue with Double Black tracer c) Orange with Double Black tracer Green with Double Black tracer Brown with Double Black tracer 25 or

42、 DD/BL or 25-DD/BL a) 26 or DD/OR or 26-DD/OR 27 or DD/GR or 27-DD/GR 28 or DD/BR or 28-DD/BR 29 30 31 32 Slate with Double Black tracer White with Double Black tracer Red with Double Black tracer Black with Double White tracerb) 29 or DD/SL or 29-DD/SL 30 or DD/WH or 30-DD/WH 31 or DD/RD or 31-DD/R

43、D 32 or DD/BK or 32-DD/BK 33 34 35 36 Yellow with Double Black tracer Violet with Double Black tracer Rose with Double Black tracer Aqua with Double Black tracer 33 or DD/YL or 33-DD/YL 34 or DD/VI or 34-DD/VI 35 or DD/RS or 35-DD/RS 36 or DD/AQ or 36-DD/AQ 37 48 See Note d. See Note d. Table Notes

44、appear on the next page. ANSI/TIA-598-D-1 4 Table 1a (continued) a) “D/” denotes a dashed mark or tracer per Clause 3.6. That is, D/BL is Dash/Blue, meaning Blue with a tracer. “DD/” denotes a double-dash mark or tracer per Clause 3.6. That is, DD/BL is Double Dash/Blue, meaning Blue with a double t

45、racer. b) Other discernable tracer colors may be used as agreed to by the manufacturer and the user. c) Positions 25 through 36 shall allow, as an alternative to double-dash tracers, a single Red stripe except for Red which is striped Yellow. d) For positions 37 through 48, use the same 12 base colo

46、rs but allow a single Green stripe, except for Green, which shall use an orange stripe. As an alternative, a triple Black dash/tracer mark may be used, except for Black, which shall use a triple White dash/tracer mark. ANSI/TIA-598-D-1 5 Table 1b - Individual fiber, unit, and group identification fo

47、r the case of 16 elements in a set Position # Base color/tracer per TIA Abbreviation/print legend 1 2 3 4 Blue Orange Green Brown 1 or BL or 1-BL 2 or OR or 2-OR 3 or GR or 3-GR 4 or BR or 4-BR 5 6 7 8 Slate White Red Black 5 or SL or 5-SL 6 or WH or 6-WH 7 or RD or 7-RD 8 or BK or 8-BK 9 10 11 12 Y

48、ellow Violet Rose Aqua 9 or YL or 9-YL 10 or VI or 10-VI 11 or RS or 11-RS 12 or AQ or 12-AQ 13 14 15 16 Olive Magenta Tan Lime 13 or OL or 13-OL 14 or MG or 14-MG 15 or TN or 15-TN 16 or LM or 16-LM 17 18 19 20 Blue with Black tracer Orange with Black tracer Green with Black tracer Brown with Black

49、 tracer 17 or D/BL or 17-D/BL a) 18 or D/OR or 18-D/OR 19 or D/GR or 19-D/GR 20 or D/BR or 20-D/BR 21 22 23 24 Slate with Black tracer White with Black tracer Red with Black tracer Black with White tracer b) 21 or D/SL or 21-D/SL 22 or D/WH or 22-D/WH 23 or D/RD or 23-D/RD 24 or D/BK or 24-D/BK 25 26 27 28 Yellow with Black tracer Violet with Black tracer Rose with Black tracer Aqua with Black tracer 25 or D/YL or 25-D/YL 26 or D/VI or 26-D/VI 27 or D/RS or 27-D/RS 28 or D/AQ or 28-D/AQ 29 30 31 32 Olive with Black tracer Magenta with Black tracer Tan with Black tracer Lime w