TIA-664 507-B-2007 Wireless Features Description Call Waiting (CW) (Revision of TIA-664 507-A).pdf

1、 TIA-664.507-B (Revision of TIA-664.507-A) October 2007Wireless Features Description: Call Waiting (CW) ANSI/TIA-664.507-B-2007 APPROVED: OCTOBER 12, 2007 REAFFIRMED: DECEMBER 20, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating mis

2、understandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any

3、respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards

4、 and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard doe

5、s not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (Fro

6、m Project No. SP-3-4652.507-RV2-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards

7、development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of pat

8、ents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of

9、 any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that

10、 procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publicatio

11、n of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate th

12、e records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as

13、 to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test o

14、r otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A

15、PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICA

16、BLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE

17、CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODU

18、CT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

19、 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 507-i Contents Wireless Features Description: Call Waiting Contents List of Tables.ii Revision Historyii 1 Call Waiting (CW)1 1.1 Normal Procedures with Successful Out

20、come1 1.2 Exception Procedures or Unsuccessful Outcome .6 1.3 Alternative Procedures .7 1.4 Interactions with Other Wireless Services7 TIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 5

21、4 55 56 57 58 59 60 List of Tables 507-ii List of Tables Table 1: CW Subscription Options 1 Table 2: 2-Way State for Call Waiting 3 Table 3: 2-Way Notification State for Call Waiting 4 Table 4: 2-Way CW State for Call Waiting.5 Table 5: 2-Way State for Call WaitingException 6 Revision History Revisi

22、on Date Remarks IS-53, Revision 0 August 1991 Initial publication IS-53, Revision A May 1995 Updated publication ANSI/TIA/EIA-664, Revision 0 June 1996 Initial ANSI publication ANSI/TIA/EIA/664-507-A July 2000 Updated ANSI publication TIA-664.507-B September 2007 Updated publication TIA-664.507-B 1

23、2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 507-1 Call Waiting (CW) 1 Call Waiting (CW) Call Waiting (CW) provides notification to a controlling subscriber of an incoming call

24、 while the subscribers call is in the 2-way state. Subsequently, the controlling subscriber can either answer or ignore the incoming call. If the controlling subscriber answers the second call, it may alternate between the two calls. CW does not impact a subscribers ability to originate calls. Appli

25、cability to Telecommunications Services CW is applicable to voice telecommunication services. 1.1 Normal Procedures with Successful Outcome Authorization CW may be generally available or may be provided after prearrangement with the service provider. CW may be authorized for the following options: T

26、able 1: CW Subscription Options Subscription Options Values Temporary Cancellation Demand. The subscriber is authorized to cancel or deactivate CW for a single call. Permanent. CW may not be canceled or deactivated for a single call. Activation Demand. The subscriber is authorized to control the act

27、ivation and deactivation of CW. Permanent. CW is active while authorized (unless canceled). Deauthorization CW may be withdrawn at the subscribers request or for administrative reasons. Registration CW has no registration. TIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

28、25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Call Waiting (CW) 507-2 Deregistration CW has no deregistration. Activation CW may be activated upon authorization. CW may be activated by a Demand Activation authorized subscriber specifying

29、a CW activation feature code, as in: *FC + SEND . If the activation is accepted, the system shall indicate success with feature confirmation treatment. Deactivation CW shall be deactivated upon deauthorization. CW Demand Deactivation CW may be deactivated by a Demand Activation authorized subscriber

30、 specifying a CW deactivation feature code, as in: *FC0 + SEND . If the deactivation is accepted, the system shall indicate success with feature confirmation treatment. Temporary Cancellation During a Call CW may be canceled during a single call by a Demand Cancellation authorized subscriber issuing

31、 a flash request and then specifying a CCW feature code, as in: *FC0 + SEND . If the cancellation is accepted, the system may indicate success with feature confirmation treatment and then reconnect the call. At the completion of the call, CW shall resume the activation state prior to using the cance

32、l CW feature code. Temporary Cancellation With a Call Setup Request CW may be canceled for a single call concurrently with a call request by a Demand Cancellation authorized subscriber specifying a CCW feature code and a termination address, as in: *FC0 + # + termination address + SEND . Alternative

33、ly: *FC + termination address + SEND is possible, if a fixed length Temporary Cancellation feature code is distinct from the deactivation feature code. TIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

34、 49 50 51 52 53 54 55 56 57 58 59 60 507-3 Call Waiting (CW) If the cancellation is accepted, the system may indicate success with feature confirmation treatment and then the call is allowed to proceed toward the termination address. At the completion of the call, CW shall resume the activation stat

35、e prior to using the cancel CW feature code. Invocation CW is invoked when a incoming call attempt arrives for a subscriber who is already engaged in conversation on a prior call, who does not have another call waiting, and who has CW active. Normal Operation with Successful Outcome The following ta

36、bles describe the call party actions and system reactions for CW. Table 2: 2-Way State for Call Waiting State 2-way Condition The controlling subscriber is alerting the other party, or the controlling subscriber is in a two-way conversation with the other party. XID Call Party Action System Reaction

37、 3I 2 A call arrives from a calling party for a controlling subscriber in a two-way conversation and with CW active. CW notification is applied to the controlling subscriber. The CW notification is repeated once if the waiting call is not answered. Audible ringing is applied to the calling party unt

38、il the call is answered or given no answer treatment. Go to the 2-way CW notification tate. sThe CW notification may be an audible Call Waiting Tone injected into the voice path, a message on the alphanumeric display, or both. TIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

39、 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Call Waiting (CW) 507-4 Table 3: 2-Way Notification State for Call Waiting State 2-way CW notification Condition The controlling subscriber is in a two-way conversation with the other part

40、y and call waiting notification is applied. XID Call Party Action System Reaction 7S The controlling subscriber signals a flash request by pressing the SEND key without digits. Remove the call waiting notification. Place the other party on hold. Connect the controlling subscriber and the calling par

41、ty. Go to the 2-way CW state. 7E The controlling subscriber requests a disconnect by pressing the END key. Release the other party. Remove the call waiting notification. Apply the alerting to the controlling subscriber for the calling party. Go to the Alerting state. 7A The controlling subscriber en

42、ters a termination address, as in: termination address + SEND . Ignore any accompanying digits. Remove the call waiting notification. Place the other party on hold. Connect the controlling subscriber and the calling party. Go to the 2-way CW state. 7F7U The controlling subscriber enters a feature co

43、de string, as in: *FC + SEND or *FC + SEND . Ignore any accompanying digits. Remove the call waiting notification. Place the other party on hold. Connect the controlling subscriber and the calling party. Go to the 2-way CW state. 7D The other party disconnects. Release the other party. Remove the ca

44、ll waiting notification. Apply the alerting to the controlling subscriber for the calling party. Go to the Alerting state. 7I A call arrives from a calling party for the controlling subscriber with CW active. The calling party is given busy treatment. Remain in the 2-way CW notification state. 7T Th

45、e calling party abandons his or her all attempt. cRemove the call waiting notification. Go to he 2-way state. tTIA-664.507-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 507-

46、5 Call Waiting (CW) Table 4: 2-Way CW State for Call Waiting State 2-way CW Condition The controlling subscriber is in a two-way conversation with the other party and a third party is on hold. XID Call Party Action System Reaction 8S The controlling subscriber signals a flash request by pressing the

47、 SEND key without digits. Place the other party on hold. Connect the controlling subscriber and the third party. Remain in the 2-way CW state. 8E The controlling subscriber requests a disconnect by pressing the END key. Release the other party. Apply the recall distinctive alerting for the third par

48、ty to recall the controlling subscriber. Optionally apply audible alerting to the held party. Go to the Alerting state. 8A 8F8U The controlling subscriber enters a termination address, as in: termination address + SEND , *FC + SEND , or *FC + # + termination address SEND Ignore any accompanying digi

49、ts. Place the other party on hold. Connect the controlling subscriber and the third party. Remain in the 2-way CW state. 8I A call arrives from a calling party for the controlling subscriber with CW active. The calling party is given busy treatment. Remain in the 2-way CW state. 8H The held (third) party disconnects. Release the held (third) party. Go to the 2-way state. 8D The other party disconnects. Optionally apply a warning tone. Release the other party. Connect the controlling subscriber and the third party. Go to the -way state. 2Call Detail Record The system should recor