TIA-902 BAAF-A-2007 Wideband Air Interface C Mobility Management (MM) Layer Specification Public Safety Wideband Data Standards Project Digital Radio Technical Standards《宽带空中接口 移动性.pdf

1、 TIA-902.BAAF-A (Revision of TIA-902.BAAF) November 2007Wideband Air Interface Mobility Management (MM) Layer Specification Public Safety Wideband Data Standards Project Digital Radio Technical Standards ANSI/TIA-902.BAAF-A-2007 APPROVED: NOVEMBER 28, 2007REAFFIRMED: OCTOBER 3, 2013NOTICE TIA Engine

2、ering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper pro

3、duct for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications

4、preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it

5、 assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and

6、health practices and to determine the applicability of regulatory limitations before its use. (From Project No. SP-3-0090-RV1-RF1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.5 Subcommittee on Signaling and Data Transmission). Published by TELECO

7、MMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or p

8、ractice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications a

9、re claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party

10、to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided i

11、n the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard

12、, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of

13、 assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications

14、 of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or ser

15、vices or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY A

16、ND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY O

17、R HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIM

18、ITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF TH

19、E POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. WAI MM Layer TIA-902.BAAF-A i Foreword (This foreword is not part of this standard.) This document h

20、as been published by the Telecommunications Industry Association (TIA) in accordance with the terms and conditions provided for in a Memorandum of Understanding (MoU) executed by and between the TIA, the Associated Public-Safety Communications Officials (APCO), the National Association of State Tele

21、communications Directors (NASTD), and the various agencies of the Federal government (FED). This TIA Standard is being promulgated and will be maintained by the TR-8.5 Signaling and Data Transmission committee, and working groups under the sponsorship of the Telecommunications Industry Association.

22、This document has been published as a TIA Standard because it contains useful technical information on emerging digital techniques for Land Mobile Radio Service. In particular, it describes the wideband air interface mobility management layer technology. Generally, the wideband air interface been de

23、veloped by TIA TR-8.5 to be consistent with the Statement of Requirements adopted by the National Coordination Committees Interoperability Subcommittee, WG6 Wideband Data. This document references that the primary user needs document will be “APCO Project 25/34 Statement of Requirements (P34SOR)”. T

24、his mobility management layer specification provides a standard for the definition and control of system access and mobility tracking of MRC units over 50, 100, and 150 kHz bandwidth physical radio media. The TIA makes no claims as to the applicability of the information contained in this document f

25、or any purpose although it is believed that the information will prove to be invaluable to designers of wideband data compliant equipment. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort h

26、as been invested in the preparation of this document to ensure the accuracy of the information it contains. While all reasonable efforts have been made to ensure the accuracy of this document, it should be understood that significant work remains in fully developing the standard series and this docu

27、ment will be updated as necessary. TIA-902.BAAF-A WAI MM Layer ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document, no position is taken

28、with respect to the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to ob

29、tain such licenses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: None currently identified TIA shall not be responsible for identifying patents for which licenses may be required by this document or for conducting inqui

30、ries into the legal validity or scope of those patents that are brought to its attention. WAI MM Layer TIA-902.BAAF-A iii TABLE OF CONTENTS 1. SCOPE1 2. TERMS.2 3. GENERAL MM LAYER DESCRIPTION .3 3.1 NETWORK REGISTRATION 3 3.1.1 Mobility Management Area Definitions 3 3.1.2 Unit Registration .4 3.1.3

31、 Location Registration 5 3.1.4 Location Area Paging .5 3.1.5 Network Registration Sequence Example5 3.2 MRC AUTHENTICATION 5 3.3 RADIO RESOURCE MANAGEMENT .5 3.4 MRC NEGOTIATED ABSENCE .6 3.5 INFORMATION FLOW INSIDE THE MM.6 3.6 INTERFACE TO MRC/FNE SERVICE USERS .6 3.7 INTERFACE TO LLC LAYER.7 3.8

32、MRC INFORMATION STORAGE .8 4. MM OPERATION.9 4.1 MM STATE TRANSITION DIAGRAM9 4.1.1 Closed State.10 4.1.2 Channel Hunt State (MRC Only).10 4.1.3 Camped State (MRC Only)11 4.1.4 Unit Registration State 11 4.1.5 Location Registration State .11 4.1.6 Open State .12 4.2 SYSTEM BROADCAST OPERATION .13 4.

33、2.1 Additional Channel Status Broadcast Procedures 13 4.2.2 Adjacent Status Broadcast Procedures .13 4.2.3 Channel Identifier Update Broadcast Procedures 14 4.2.4 System Identification Broadcast Procedures.14 4.2.5 Time and Data Broadcast Procedures 14 4.2.6 Fixed Station Information Broadcast Proce

34、dures.14 4.2.7 Channel Access Information Broadcast Procedures.15 4.3 MRC CHANNEL ACQUISITION OPERATION.16 4.3.1 MRC Controlled (Type 1) Procedures.16 4.3.2 FNE Controlled (Type 2) Procedures .18 4.4 MRC CONFIGURATION OPERATION.20 4.4.1 MRC Configuration Procedures20 4.5 MRC REGISTRATION OPERATION 2

35、1 4.5.1 Overview21 4.5.2 Unit Registration Procedures21 4.5.3 Location Registration Procedures.23 4.5.4 Location Area Paging Procedures 25 4.6 MRC AUTHENTICATION OPERATION.25 4.6.1 Overview25 4.6.2 Authentication Procedures 26 4.7 RADIO RESOURCE MANAGEMENT OPERATION27 4.7.1 Overview27 4.7.2 MRC Init

36、iated RRM Procedures .27 4.7.3 FNE Initiated RRM Procedures 29 4.8 MRC NEGOTIATED ABSENCE OPERATION30 4.8.1 Overview30 TIA-902.BAAF-A WAI MM Layer iv 4.8.2 Negotiated Absence Procedures . 30 4.8.3 Broadcast Information 31 4.8.4 Negotiated Absence State Transition Diagrams. 31 4.8.5 Successful Exampl

37、e of Negotiated Absence Procedures 35 5. MM PDU FORMAT DEFINITION 36 5.1 GENERAL MM PDU FORMAT . 36 5.2 MM FORMAT SUMMARY 37 5.3 INBOUND FNE PDUS . 38 5.3.1 Authentication Response (W_AUTH_RES) 38 5.3.2 Channel Request (W_CHN_REQ) 39 5.3.3 Channel Signal Quality Indication (W_CSQ_IND) 39 5.3.4 Confi

38、guration Request (W_CNF_REQ) 40 5.3.5 Negotiated Absence Request (W_NEG_ABS_REQ) . 40 5.3.6 Location Area Page Response (W_LA_PAGE_RES) . 41 5.3.7 Location Registration Request (W_LOC_REG_REQ) 41 5.3.8 Unit Deregistration Command (W_U_DEREG_CMD) 42 5.3.9 Unit Registration Request (W_U_REG_REQ) 43 5.

39、4 OUTBOUND FNE PDUS . 44 5.4.1 Authentication Command (W_AUTH_CMD) . 44 5.4.2 Authentication Result (W_AUTH_RST) 45 5.4.3 Channel Command (W_CHN_CMD) . 45 5.4.4 Configuration Response (W_CNF_RES) 46 5.4.5 Channel Signal Quality Command (W_CSQ_CMD) 47 5.4.6 Location Area Page Request (W_LA_PAGE_REQ).

40、 47 5.4.7 Location Registration Response (W_LOC_REG_RES) 48 5.4.8 Negotiated Absence Command (W_NEG_ABS_CMD) 48 5.4.9 Unit Registration Command (W_U_REG_CMD). 49 5.4.10 Unit Registration Response (W_U_REG_RES) . 49 5.5 FNE BROADCAST PDUS 50 5.5.1 Adjacent Status Broadcast Type 1 (W_ADJ_STS1_BCST). 5

41、0 5.5.2 Adjacent Status Broadcast Type 2 (W_ADJ_STS2_BCST). 51 5.5.3 Additional Channel Broadcast (W_ADC_STS_BCST) . 52 5.5.4 Channel Identifier Update Broadcast PDU Type 1 (W_IDEN_UP1_BCST). 53 5.5.5 Channel Identifier Update Broadcast PDU Type 2 (W_IDEN_UP2_BCST). 54 5.5.6 System Identification Br

42、oadcast (W_SYS_ID_BCST). 55 5.5.7 Time and Date Broadcast (W_TME_DAT_BCST) . 56 5.5.8 Fixed Station Identifier Broadcast (W_FSI_BCST) 57 5.5.9 Channel Access Information Broadcast (W_AXS_INFO_BCST) . 57 6. MM INFORMATION FIELD DEFINITION 58 6.1 MM PDU FIELDS 58 6.1.1 Site Network Flag (A) .58 6.1.2

43、Base Frequency (BFQ). 58 6.1.3 Broadcast Period (BP) . 58 6.1.4 Bandwidth Capability (BWC) . 58 6.1.5 Channel. 59 6.1.6 Channel Access Hold-Off Timer (CAHOT) 59 6.1.7 Channel Bandwidth (CBW) 60 6.1.8 Configuration Request Flow Control (CF). 60 6.1.9 Channel Loading (CHLD) 60 6.1.10 Channel Index (CI

44、) 60 6.1.11 Challenge Data (CLD). 60 6.1.12 Channel Request Flow Control (CR) . 61 6.1.13 Call Sign (CS) 61 6.1.14 Call Sign Length (CS_LEN). 61 6.1.15 Channel Service Class (CSC) 61 WAI MM Layer TIA-902.BAAF-A v 6.1.16 Channel Spacing (CSP) 62 6.1.17 Channel Signal Quality (CSQ) .62 6.1.18 Command

45、Value (CV).62 6.1.19 Date 63 6.1.20 Displacement Hang Timer (DHT) 63 6.1.21 Electronic Serial Number (ESN).63 6.1.22 Frame Number (FN).64 6.1.23 Fixed Station Name (FSN)64 6.1.24 Fixed Station Name Length (FSN_LEN) 64 6.1.25 Handover Flag (H) .64 6.1.26 Handover Type Commanded (HTC).64 6.1.27 Handov

46、er Type Supported (HTS) .65 6.1.28 Location Area (LA).65 6.1.29 Latitude/Longitude (LL)65 6.1.30 Latitude/Longitude Length (LL_LEN) 65 6.1.31 Location Registration Area (LRA)65 6.1.32 Link Status (LS) 65 6.1.33 Local Time Offset (LTO).66 6.1.34 MultiFrame Number (MFN) .66 6.1.35 Negotiated Absence F

47、low Control (NA) .66 6.1.36 Negotiated Absence Timer (NA.1) 66 6.1.37 Number of Measurements (NM) .66 6.1.38 Presence Duration (PD).66 6.1.39 Page Options (PO) .66 6.1.40 Pilot / Sync Code Set (PSC)67 6.1.41 Result Code (RC) 67 6.1.42 Rendezvous Slot Number (RFN) .67 6.1.43 RFSS Identifier (RFSS ID)

48、67 6.1.44 Registration Identifier (RID) 68 6.1.45 Rendezvous Slot Number (RMFN)68 6.1.46 Recovery Registration Hold-Off Timer (RRHOT) 68 6.1.47 Requested / Granted Rendezvous Period (RRP/GRP)68 6.1.48 Random Seed (RS) 68 6.1.49 Result Data (RSD) 68 6.1.50 Rendezvous Slot Number (RSN)68 6.1.51 Regist

49、ration Value (RV)69 6.1.52 Site Index (SI) .69 6.1.53 Site Identifier (Site ID)69 6.1.54 Synchronization Identifier (SID).70 6.1.55 Signal Quality Flow Control (SQ)70 6.1.56 Signal Quality Offset (SQO) .70 6.1.57 Site Type Indication (STI).70 6.1.58 MRC Unit Identifier (SUID) .71 6.1.59 System Identifier (SYS ID) 71 6.1.60 Time 72 6.1.61 Transmit Offset (TXO) 72 6.1.62 Unit Identifier (UID).73 6.1.63 Site Validity Flag (V)73 6.1.64 Validity of Date (VD)73 6.1.65 Version Number (VER).73 6.1.66 Validity of Local Time Offset (VL)73 6.1.67 Validity of Time (VT) 73 6.1.68 Wide Area Comm