UL SUBJECT 2432-2005 OUTLINE OF INVESTIGATION FOR DRY SYSTEM WATER DELIVERY TIME CALCULATION PROGRAMS (Issue 2)《干系统配水时间计算计划调查大纲 发布编号 2》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOctober 12, 20051SUBJECT 2432OUTLINE OF INVESTIGATIONFORDRY SYSTEM WATER DELIVERY TIME CALCULATION PROGRAMSIssue Number: 2October 12, 2005Summary of TopicsThis Second Issue of Subject 2432, Outli

2、ne of Investigation for DrySystem Water Delivery Time Calculation Programs, is issued for softwareprograms intended to calculate the water delivery time for dry sprinklersystems.COPYRIGHT 2005 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTIO

3、N WITHOUT PERMISSION FROM ULOCTOBER 12, 2005SUBJECT 24322No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .42 Components 43 Units of Measurement .44 Undated References 55 Glossary .5PERFORMANCE6 V

4、erification of Water Delivery Time Calculation Method 57 Input and Output Information .88 Users Manual .10MARKING9 General .10OCTOBER 12, 2005 SUBJECT 2432 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requireme

5、nts cover software programs intended to calculate the water delivery time for drysprinkler systems. The use of the term water herein does not preclude the application of theserequirements to water based liquids where so investigated and referenced in the manufacturers usersmanual. The requirements c

6、ontained herein are not to be used to investigate the accuracy of softwareprograms intended for hydraulically calculating sprinkler systems.1.2 Requirements for use of these programs are included in the National Fire Protection AssociationStandard for the Installation of Sprinkler Systems, NFPA 13.2

7、 Components2.1 Except as indicated in 2.2, a component of a product covered by this Outline of Investigation shallcomply with the requirements for that component.2.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the app

8、lication of the component in theproduct covered by this Outline of Investigation, orb) Is superseded by a requirement in this Outline of Investigation.2.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.2.4 Specific components are incomplete in c

9、onstruction features or restricted in performance capabilities.Such components are intended for use only under limited conditions, such as certain temperatures notexceeding specified limits, and shall be used only under those specific conditions.3 Units of Measurement3.1 Values stated without parent

10、heses are the requirement. Values in parentheses are explanatory orapproximate information.OCTOBER 12, 2005SUBJECT 24324UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL4 Undated References4.1 Any undated reference to a code or standard appeari

11、ng in the requirements of this Outline ofInvestigation shall be interpreted as referring to the latest edition of that code or standard.5 Glossary5.1 For the purpose of this outline, the following definitions apply.5.2 TIME TO OPERATING PRESSURE Time between first water arrival at an open sprinkler

12、and theachievement of a specified pressure.5.3 TRANSIT TIME Time between water entering the system and first water arrival at an opensprinkler.5.4 TRIP TIME Time between first sprinkler activation and the operation of the dry pipe valve.5.5 WATER DELIVERY TIME The total of the trip and transit times

13、.PERFORMANCE6 Verification of Water Delivery Time Calculation Method6.1 A software program intended to calculate the water delivery time for dry sprinkler systems shallaccurately predict the trip time, transit time, time to operating pressure and water delivery time wheninvestigated as described in

14、6.2 6.6. The accuracy of the calculation method shall be as follows:a) Trip Time The area under the predicted pressure decay curve shall be within 10 percentof the measured pressure decay curve and the average difference between the predicted andmeasured pressures shall not exceed 10 percent for eac

15、h experimental test referenced in 6.3.In addition, the average absolute deviation values for all of the tests referenced in 6.3 for thearea under the predicted decay curve as compared to the measured pressure decay curve shallnot exceed 5 percent.b) Transit Time The predicted transit times shall be

16、within 15 percent of the measuredtransit time for each experimental test referenced in 6.4.c) Time to Operating Pressure The area under the predicted pressure-time curve shall bewithin 5 percent of the pressure-time curve and the average difference between the predictedand measured pressures shall n

17、ot exceed 10 percent for each experimental test referenced in6.5.d) Water Delivery Time The predicted water delivery time with the application of a 10percent factor is required to be longer than the measured water delivery time for eachexperimental test referenced in 6.6.OCTOBER 12, 2005 SUBJECT 243

18、2 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL6.2 The manufacturer shall provide the basic principles used to conduct the water delivery timecalculations. The accuracy of the software program intended to calculate the water delivery time

19、for drysprinkler systems shall be investigated for accuracy by comparing the predicted results to applicableexperimental data contained in the UL Subject 2432 file entitled Data for Dry pipe CalculationVerification. The experimental tests used for each parameter are described in 6.3 6.6.6.3 The trip

20、 time accuracy is to be evaluated by comparing the predicted decay pressure considering thearea under the curve and the average error on a point-by-point basis to the results of the experimentaltests referenced in Table 6.1. For a point-by-point comparison, predicted system pressure is to becompared

21、 to the measured system pressure for each experimental test at least 10 different times,approximately equally spaced throughout the time range. The predicted pressure values are to be linearlyinterpolated if the time intervals are not identical between the trip time predictions and experimental test

22、s.Table 6.1Experimental tests for trip time evaluation for non-looped, tree type systemsTest code Nominal systemvolume(gal).Number ofsprinklers openedInitial pressure Dry valve trippressure(gal). (psi) (psi)010702167 392 1 10 5010702169 392 1 10 5010702170 392 1 10 5010702171 392 1 20 15010702172 39

23、2 1 20 15010702173 392 1 20 15010702176 392 1 35 30010702177 392 1 35 30010702178 392 1 35 30010702192 266 1 10 5010702193 266 1 35 30010702196 395 1 35 30010702197 395 1 10 5010702198 332 1 10 5010702199 332 1 35 30010702288 1310 1 10 5010702289 1310 1 20 15010702290 1310 1 35 30010702291 1310 1 10

24、 5010702292 1310 1 20 15010702293 1310 1 35 30010702294 1310 1 10 5010702295 1310 1 20 15010702296 1310 1 35 30010702319 884 1 10 5010702320 884 1 35 30010702321 1307 1 10 5010702322 1307 1 35 30010702323 1082 1 10 5010702324 1082 1 35 3001070201 506 1 40 1101070203 506 4 40 11OCTOBER 12, 2005SUBJEC

25、T 24326Table 6.1 Continued on Next PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULTable 6.1 ContinuedTest code Nominal systemvolume(gal).Number ofsprinklers openedInitial pressure Dry valve trippressure(gal). (psi) (psi)01070202 506 2 40

26、1101070204 506 1 40 1101080204 506 2 30 1101070206 506 1 30 116.4 The transit time accuracy is to be evaluated by comparing the predicted time interval from waterentering the system and first water arrival at an open sprinkler to the results of the experimental testsreferenced in Table 6.2.Table 6.2

27、Experimental tests for transit time evaluation for non-looped, tree type systemsTest code Nominal systemvolumeNumber ofsprinklersInitial pressure Dry valve trippressure(gal.) (psi) (psi)010702167 392 1 10 5010702169 392 1 10 5010702170 392 1 10 5010702171 392 1 20 15010702172 392 1 20 15010702173 39

28、2 1 20 15010702176 392 1 35 30010702177 392 1 35 30010702178 392 1 35 30010702192 266 1 10 5010702193 266 1 35 30010702196 395 1 35 30010702197 395 1 10 5010702198 332 1 10 5010702199 332 1 35 30010702288 1310 1 10 5010702289 1310 1 20 15010702290 1310 1 35 30010702291 1310 1 10 5010702292 1310 1 20

29、 15010702293 1310 1 35 30010702294 1310 1 10 5010702295 1310 1 20 15010702296 1310 1 35 30010702319 884 1 10 5010702320 884 1 35 30010702321 1307 1 10 5010702322 1307 1 35 30010702323 1082 1 10 5010702324 1082 1 35 30OCTOBER 12, 2005 SUBJECT 2432 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER R

30、EPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL6.5 The time to operating pressure accuracy is to be evaluated by comparing the predicted pressureconsidering the area under the curve and the average error on a point-by-point basis to the results of theexperimental test identified as Test Code 0

31、10702321 as referenced in Table 6.2. The pressure is to beevaluated between the first arrival of water to the sprinkler and the achievement of a specified pressure.For a point-by-point comparison, predicted operating pressure is to be compared to the measuredoperating pressure for the experimental t

32、est at least 10 different times, approximately equally spacedthroughout the time range. The predicted pressure values are to be linearly interpolated if the timeintervals are not identical between the trip time predictions and experimental tests.6.6 The water delivery time accuracy is to be evaluate

33、d by comparing the predicted time interval betweenfirst sprinkler activation and the first water arrival at an open sprinkler with the application of a 10 percentfactor to the results of the experimental tests referenced in Table 6.2.7 Input and Output Information7.1 The program input shall include

34、the necessary information to perform the water delivery timecalculations. The information to be inputted shall include system details such as the following:a) Piping system details such as material type, roughness, size, internal diameter, fittings,lengths, equivalent lengths, and elevations;b) Spri

35、nkler details such as k-factor and orifice size;c) Dry pipe valve details such as trip ratio and performance characteristics of an accelerator, ifused;d) System water supply characteristics; ande) Other characteristics such as fluid type, fluid density, fluid viscosity, fluid temperature, gastype, g

36、as pressure, gas temperature, static pressure, residual pressure and available waterflow.7.2 The program output shall include details regarding input data and calculation results. The output shallinclude at least the following information:a) Fluid type and temperature;b) System gas type, pressure an

37、d temperature;c) Dry pipe valve details such as trip ratio and performance characteristics of an accelerator, ifused;d) System water supply characteristics;e) Static water supply pressure;f) Residual water supply pressure;g) Available water flow;h) Calculated system volume;OCTOBER 12, 2005SUBJECT 24

38、328UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULi) Calculated trip time;j) Calculated water delivery time; andk) Identification of the open sprinkler or sprinklers used in the calculation including appropriatedetails of the open sprinkler(s

39、) such as K-factor, orifice diameter and operating pressure.7.3 The program output shall include appropriate statements relative to confirmation of the input data anduse of the system. The output shall include at least the following statements or similar text:a) The sprinkler system must be installe

40、d in accordance with NFPA 13, Standard for theInstallation of Sprinkler Systems.b) The data inputted into the program shall correspond to the actual installation.c) The actual water supply curve shall correlate to the values assumed to be available at thedry pipe valve outlet.d) The calculations sha

41、ll be performed for sprinklers yielding the longest water delivery time.e) The factor applied to or calculated from the water delivery time prediction shall not be lessthan 10 percent.f) The inspectors test is to be conducted to determine the initial water delivery time forcomparison to future testi

42、ng as required in NFPA 25, Standard for the Inspection, Testing, andMaintenance of Water-Based Fire Protection Systems. If the measured water delivery time isexcessive, there may be a problem with the installation or calculation inputs and system shouldbe reviewed.g) The water delivery time calculat

43、ion program shall not be used to hydraulically calculatesprinkler systems in accordance with NFPA 13, Standard for the Installation of SprinklerSystems.h) Exhausters shall not be used in the calculation of water delivery time.i) Other information as applicable to the specific program.OCTOBER 12, 200

44、5 SUBJECT 2432 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL8 Users Manual8.1 A water delivery time calculation program shall have a users manual that provides guidance anddetailed information regarding the use of the program. In addition,

45、 the users manual shall reference thelimitations determined by the calculation method including at least the following items:a) A description of the general principles utilized in the calculation method and the types of drypipe systems intended to be calculated such as non-looped, tree type systems.

46、b) Minimum and maximum gas pressure and temperature;c) Minimum and maximum pipeline flow rates;d) Minimum and maximum dry pipe valve trip ratio and accelerator differential pressures;e) Minimum and maximum fluid density and viscosity;f) Minimum and maximum sprinkler K-factor, orifice diameter and op

47、erating pressure;g) Minimum and maximum pipe size and roughness;h) Minimum and maximum water supply static and residual pressures;i) The statements or similar text described in 7.3;j) The name of the manufacturer or private labeler or equivalent designation; andk) Date and manual designation number on each page.MARKING9 General9.1 A water delivery time calculation program distribution media shall be marked with the following:a) Manufacturers or private labelers name or identifying symbol; andb) Date and version of the program.OCTOBER 12, 2005SUBJECT 243210