RCC M-2007 压水堆核岛机械设备设计和建造规则 总则.pdf

1、RCC M-2007 压水堆核岛机械设备设计和建造规则 总则_2007 editionRCC-M - Edition 2007 Tous droits de traduction, dadaptation, de citation et de reproduction partielle du code ASME ont t concds par lASME lAFCEN. Toute adaptation, traduction et utilisation ventuelles par lAFCEN nengagent pas lASME Right for AFCEN to reprod

2、uce, translate, excerpt and adapt certain portions of the ASME Code has been granted by ASME. Any adaptation, translation and use made by AFCEN shall not engage ASME AFCEN - association rgie par la loi du 1erJuillet 1901 Sige Administratif : AFCEN, Tour Framatome 92084 Paris la Dfense Cedex Dpt lgal

3、 N113-2007 ISBN N2-913638-25-2 2007 Tous droits de traduction, de reproduction et dadaptation rservs pour tous pays II n 113-2007 RCC-M - Edition 2007 FOREWORD On October 19th, 1980, Electricit de France, Framatome and Novatome founded the Association Franaise pour les rgles de conception, de constr

4、uction et de surveillance en exploitation des matriels des chaudires lectro-nuclaires - AFCEN (French society for design, construction and in-service inspection rules for nuclear island components). The purpose of AFCEN is, in particular to: - draw up detailed and practical rules for the design, man

5、ufacture, installation, commissioning, and in-service inspection of components for nuclear islands used for power generating stations; - revise such rules on the basis of experience, technological advances and changes in technology; - publish such rules or revisions thereto. The French design and co

6、nstruction rules for mechanical components of PWR nuclear Islands (RCC-M) published in Code form by AFCEN primarily apply to safety class components. This Code is used as a basis for contractual relations between Client and Supplier, in which case it shall be accompanied by a list of components to w

7、hich the RCC-M applies. The rules given in the RCC-M draw on the achievements of development work undertaken in France and world-wide having resulted in French industrial practice. The rules for fabrication and examination given in the RCC-M are a description of current practice in the French nuclea

8、r industry based on its own nuclear and industrial experience. AFCEN shall not be held responsible for the use made of the texts and reports it publishes and the opinions it expresses. n. 113-2007 III RCC-M - Edition 2007 IV n 113-2007 RCC-M - Edition 2007 NOTE TO THE USER This is the sixth edition

9、of the RCC-M issued by AFCEN. It incorporates all the modifications and additions to the previous edition (1993) contained in the five addenda published successively in June 1994, June 1995, June 1996, June 1997 and June 2000. The revision results from 160 modification sheets (Nos. 731 to 890 inclus

10、ive) covering, in particular: ? the need to reduce costs by simplifying and standardising the requirements in line with current non-nuclear industrial practice while maintaining the high safety standards necessary for the type of components dealt with in the present code, ? the need to take into acc

11、ount improvements in industrial practice and to make the requisite additions regarding advances in technology, particularly in the fields of analysis (e.g. plasticity corrections), procurement and implementation (pre- and post-heating temperatures, automatic liquid penetrant testing, characterisatio

12、n of indications detected ultrasonically, etc.), ? the inclusion of revisions, additions and recommendations resulting from feedback from plant operation, in particular regarding design precautions (fatigue prevention, for example), procurement (residual element limits for chemical composition of ma

13、terials, use of Alloy 690 and related filler materials), and implementation (scope of surface inspections and conditions), ? the need to keep pace with changes to statutory rules and to standards, with ever-increasing reference to International and European standards, especially regarding materials,

14、 analysis methods, welder qualifications and welding processes, non-destructive examinations and certification of inspectors, ? changes included with the purpose of eliminating potential sources of misinterpretation. The authors have also set out to clarify the procurement equivalence conditions bet

15、ween different editions of the code. To this end, a new table A 1500 has been included, specifying these conditions for each addendum and modification sheet issued since the 1988 edition of the code up till the present time. This new edition will be subject to periodic updating in the same way as th

16、e previous ones. n. 113-2007 V RCC-M - Edition 2007 VI n 113-2007 RCC-M - Edition 2007 GENERAL CONTENTS Reference symbol SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION A : GENERAL RULES A SUBSECTION B : CLASS 1 COMPONENTS B SUBSECTION C : CLASS 2 COMPONENTS C SUBSECTION D : CLASS 3 COMPONENTS D SU

17、BSECTION E : SMALL COMPONENTS E SUBSECTION G : REACTOR INTERNALS G SUBSECTION H : SUPPORTS H SUBSECTION J : LOW PRESSURE OR ATMOSPHERIC STORAGE TANKS J SUBSECTION P : CONTAINMENT PENETRATION P SUBSECTION Z : TECHNICAL APPENDICES Z SECTION II - MATERIALS M SECTION III - EXAMINATION METHODS MC SECTION

18、 IV - WELDING S SECTION V - FABRICATION F The structure of the Code and the general table of contents for all sections are to be found in chapter A 1000, subsection A. This edition is composed of 7 volumes : ? SECTION I : SUBSECTIONS A and Z ? SECTION I : SUBSECTIONS B C and D ? SECTION I : SUBSECTIONS E G H J and P ? SECTION II : Part 1 ? SECTION II : Part 2 ? SECTION III ? SECTION IV - SECTION V n. 113-2007 VII RCC-M - Edition 2007 VIII n 113-2007