IEC 60749-40-2011 Semiconductor devices - Mechanical and climatic test methods - Part 40 Board level drop test method using a strain gauge《半导体器件.机械和气候试验方法.第40部分 使用应变计的板级跌落试验方法》.pdf

1、 IEC 60749-40 Edition 1.0 2011-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Mechanical and climatic test methods Part 40: Board level drop test method using a strain gauge Dispositifs semiconducteurs Mthodes dessais climatiques et mcaniques Partie 40: Mthode dessai de chute a

2、u niveau de la carte avec utilisation dune jauge de contrainte IEC 60749-40:2011 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

3、any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publi

4、cation, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique

5、ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou

6、 contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Int

7、ernational Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogu

8、e of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up

9、to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions i

10、n English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Custome

11、r Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectroni

12、que et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/sea

13、rchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/jus

14、tpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il cont

15、ient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des c

16、ommentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60749-40 Edition 1.0 2011-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Mechanical and climati

17、c test methods Part 40: Board level drop test method using a strain gauge Dispositifs semiconducteurs Mthodes dessais climatiques et mcaniques Partie 40: Mthode dessai de chute au niveau de la carte avec utilisation dune jauge de contrainte INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTR

18、OTECHNIQUE INTERNATIONALE S ICS 31.080.01 PRICE CODE CODE PRIX ISBN 978-2-88912-583-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colour inside 2 60749-40 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative re

19、ferences . 5 3 Terms and definitions . 5 4 Test equipment . 6 5 Test procedure . 6 5.1 Test specimen . 6 5.2 Test substrate . 6 5.3 Solder paste 6 5.4 Mounting method . 7 5.5 Pre-conditionings 7 5.6 Initial measurements . 7 5.7 Intermediate measurement 7 5.8 Final measurement 7 6 Test method . 7 6.1

20、 Purpose of test method . 7 6.2 Example of drop test equipment 7 6.3 Example of substrate-securing jig 8 6.4 Example of distance between supporting points 8 6.5 Example of impacting surface 8 6.6 Strain gauge 8 6.7 Strain gauge attachment . 8 6.8 Strain measurement instrument . 9 6.9 Test condition

21、10 6.9.1 Drop test conditions . 10 6.9.2 Test procedure 10 6.9.3 Drop height 11 6.9.4 Pre-test characterization 11 6.9.5 Direction 13 6.9.6 Number of drops 13 7 Summary 13 Annex A (normative) Drop impact test method using test rod . 15 Annex B (informative) An example of strain gauge attachment proc

22、edure 18 Figure 1 Example of drop test equipment and substrate securing jig 9 Figure 2 Position of strain gauge attachment . 10 Figure 3 Strain measurement instrument 11 Figure 4 Waveform of strain and electrical conductivity of daisy chain . 11 Figure 5a Number of times of drop to failure 13 Figure

23、 5b Pulse duration 13 Figure 5 Correlation strain and number of failures and strain and pulse duration 13 Figure 6 Correlation between pulse duration and distance between supporting points . 13 Figure 7 Correlation between the number of times of failure and the maximum strain 14 Figure 8 Direction o

24、f dropping 14 60749-40 IEC:2011 3 Figure A.1 Outline of test apparatus . 16 Figure A.2 Waveform of strain and electrical conductivity of a daisy chain 18 Figure B.1 Equipment and materials 19 Figure B.2 Example of Attaching Strain Gauge and Guide Mark Dimensions 20 Figure B.3 Strain gauge attachment

25、 procedure, part 1 . 21 Figure B.4 Strain gauge attachment procedure, part 2 . 22 4 60749-40 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 40: Board level drop test method using a strain gauge FOREWORD 1) The International Electr

26、otechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. T

27、o this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nati

28、onal Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (

29、ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation

30、 from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot b

31、e held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. A

32、ny divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access

33、to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individ

34、ual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, th

35、is IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of th

36、is IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60749-40 has been prepared by IEC technical committee 47: Semiconductor devices. The text of this standard is based on the following doc

37、uments: FDIS Report on voting 47/2094/FDIS 47/2100/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 60749-40 IEC:2011 5 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list o

38、f all parts of the IEC 60749 series, under the general title Semiconductor devices Mechanical and climatic test methods, can be found in the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under

39、 “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are con

40、sidered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 6 60749-40 IEC:2011 SEMICONDUCTOR DEVICES MECHANICAL AND CLIMATIC TEST METHODS Part 40: Board level drop test method using a strain gauge 1 Scope This part of IEC

41、 60749 is intended to evaluate and compare drop performance of a surface mount semiconductor device for handheld electronic product applications in an accelerated test environment, where excessive flexure of a circuit board causes product failure. The purpose is to standardize test methodology to pr

42、ovide a reproducible assessment of the drop test performance of a surface mounted semiconductor devices while duplicating the failure modes normally observed during product level test. This international standard uses a strain gauge to measure the strain and strain rate of a board in the vicinity of

43、 a component. Test method IEC 60749-37 uses an accelerometer to measure the mechanical shock duration and magnitude applied which is proportional to the stress on a given component mounted on a standard board. The detailed specification shall state which test method is to be used. NOTE 1 Although th

44、is test can evaluate a structure where the mounting method and its conditions, the design of a printed wired board, solder material, the mounting capability of a semiconductor device, etc. are combined, it does not solely evaluate the mounting capability of a semiconductor device. NOTE 2 The result

45、of this test is strongly influenced by the differences between soldering conditions, the design of the land pattern of a printed wired board, solder material, etc. Therefore, in carrying out this test, it is necessary to recognize that this test cannot intrinsically guarantee the reliability of the

46、solder joint of the semiconductor devices. NOTE 3 When the mechanical stress which is generated by this test does not occur in the actual application of the device, implementation of this test is unnecessary. 2 Normative references The following referenced documents are indispensable for the applica

47、tion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60749-37, Semiconductor devices Mechanical and climatic test methods Part 37: Board level drop test method using

48、an accelerometer 3 Terms and definitions For purposes of this document, the following terms and definitions apply. 3.1 device single electronic component to be surface mounted 3.2 drop impact strength strength of the test substrate held by a jig that is dropped from a defined height, as represented

49、by the number of cyclic drops that finally cause fracture on the joint between a device and a PWB copper land 60749-40 IEC:2011 7 3.3 strain strain of surface of substrate degree of stretching observed when the test substrate is distorted NOTE The strain is a numeric dimensionless quantity. 3.4 maximum strain tensile side (+) of the strain waveform 3.5 pulse duration durati