IEC 61788-22-1-2017 Superconductivity - Part 22-1 Superconducting electronic devices - Generic specification for sensors and detectors《超导性 第22-1部分 超导电子器件 传感器和探测器的通用规范》.pdf

1、 IEC 61788-22-1 Edition 1.0 2017-07 INTERNATIONAL STANDARD Superconductivity Part 22-1: Superconducting electronic devices Generic specification for sensors and detectors IEC 61788-22-1:2017-07(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. U

2、nless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you ha

3、ve any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-121

4、1 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content

5、 of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC

6、 International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technic

7、al committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electrope

8、dia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary -

9、 std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webst

10、ore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61788-22-1 Edition 1.0 2017-07 INTERNATIONAL STANDARD Superconductivity Part 22-1: Superconducting electronic devices Generic specification f

11、or sensors and detectors INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220; 29.050 ISBN 978-2-8322-4586-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 61788-22-1:2017 IEC 2017 CONT

12、ENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Symbols 10 5 Terminology and classification . 11 5.1 Terminology 11 5.2 Classification 14 6 Cryogenic operation condition . 15 7 Marking . 15 7.1 Device identification 15 7.2 Packing . 15 8 Test and mea

13、surement procedures 15 (informative) Coherent detection 16 Annex A A.1 Superconducting hot electron bolometric (SHEB) type 16 A.2 Superconducting tunnel junction (STJ) type 17 A.3 Superconducting quantum interference device (SQUID) type 18 (informative) Direct detection . 20 Annex B B.1 Metallic mag

14、netic calorimetric (MMC) type 20 B.2 Microwave kinetic inductance (MKI) type . 21 B.3 Superconducting strip (SS) type 22 B.4 Superconducting tunnel junction (STJ) type 22 B.5 Transition edge sensor (TES) type 23 (normative) Graphical symbols for use on equipment and diagrams . 25 Annex C C.1 Superco

15、nducting region, one superconducting connection 25 C.2 Superconducting region, one normal-conducting connection . 25 C.3 Normal-superconducting boundary 25 C.4 A variation 26 C.5 Josephson junction . 26 Bibliography 27 Figure A.1 SHEB mixer 17 Figure A.2 STJ mixer . 18 Figure A.3 DC SQUID 19 Figure

16、B.1 MMC detector . 20 Figure B.2 MKI detector . 21 Figure B.3 SS detector . 22 Figure B.4 STJ detector . 23 Figure B.5 TES detector . 24 Figure C.1 Superconducting region, one superconducting connection 25 Figure C.2 Superconducting region, one normal-conducting connection . 25 IEC 61788-22-1:2017 I

17、EC 2017 3 Figure C.3 Superconducting region, one superconducting connection, and one normal-conducting connection (normal-superconducting boundary, IEC 60417- 6370:2016-09) 25 Figure C.4 Series connection . 26 Figure C.5 Superconducting region, two superconducting connections with extremely small no

18、n-superconducting region (Josephson junction, IEC 60417-6371:2016-09) . 26 Table 1 Measurands 12 Table 2 Classification of measurands . 12 Table 3 Nomenclature of superconducting sensors and detectors: type, full names, and acronym examples . 13 Table 4 Classification of detection principles 14 4 IE

19、C 61788-22-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SUPERCONDUCTIVITY Part 22-1: Superconducting electronic devices Generic specification for sensors and detectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compr

20、ising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stand

21、ards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepa

22、ratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organi

23、zations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form o

24、f recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretatio

25、n by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regio

26、nal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out b

27、y independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees f

28、or any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the No

29、rmative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held res

30、ponsible for identifying any or all such patent rights. International Standard IEC 61788-22-1 has been prepared by IEC technical committee 90: Superconductivity. The text of this standard is based on the following documents: FDIS Report on voting 90/388/FDIS 90/391/RVD Full information on the voting

31、 for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61788 series, published under the general title Superconductivity, can

32、be found on the IEC website. IEC 61788-22-1:2017 IEC 2017 5 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document

33、will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 IEC 61788-22-1:2017 IEC 2017 INTRODUCTION Superconductivity offers various possibilities for the realization of sensing and detection of a variety of me

34、asurands. Several sensors and detectors have been developed, exploiting features like superconducting energy gaps, sharp normal-superconducting transition, nonlinear IV characteristics, superconducting coherent states, and quantization of magnetic flux. All these properties can be influenced by the

35、interaction with electromagnetic fields, photons, ions, etc. Superconducting sensors and detectors have extremely high performance for energy resolution, time response, and low noise, most of which cannot be realized by any other phenomena. The word “sensor“ is normally used for measuring stationary

36、 or slowly changing electromagnetic fields, physical quantities such as current and temperature. On the other hand, the word “detector“ is normally used for single quanta such as photons from infrared to -rays and individual particles. However, the boundary between “sensor“ and “detector“ is ambiguo

37、us. In this document, therefore, both “sensor“ and “detector“ are used. Additionally, a detector using a sensor is possible, for example, X-ray detector using transition edge sensor (TES) that measures temperature rise due to the deposition of measurand energy. In this document, for example, the ter

38、minology “transition edge sensor X-ray detector“ is used for X- ray detection using TES. Superconducting sensors and detectors have been applied to a variety of fields including medical diagnosis, telecommunications, mineral exploration, astronomical instruments, quantum information processing, and

39、analytical instruments. For users, IEC standardization is necessary because there is confusing terminology, there are no graphical symbols for diagrams, and no test methods. IEC 61788-22-1:2017 IEC 2017 7 SUPERCONDUCTIVITY Part 22-1: Superconducting electronic devices Generic specification for senso

40、rs and detectors 1 Scope This part of IEC 61788-22-1 describes general items concerning the specifications for superconducting sensors and detectors, which are the basis for specifications given in other parts of IEC 61788 for various types of sensors and detectors. The sensors and detectors describ

41、ed are basically made of superconducting materials and depend on superconducting phenomena or related phenomena. The objects to be measured (measurands) include magnetic fields, electromagnetic waves, photons of various energies, electrons, ions, -particles, and others. 2 Normative references The fo

42、llowing documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC

43、 60027 (all parts), Letter symbols to be used in electrical technology IEC 60050-815, International Electrotechnical Vocabulary Part 815: Superconductivity IEC 60417, Graphical symbols for use on equipment (available at: http:/www.graphical- symbols.info) IEC 60617, Graphical symbols for diagrams (a

44、vailable at: http:/std.iec.ch/iec60617) ISO 1000, SI units and recommendations for the use of their multiples and of certain other units ISO 7000, Graphical symbols for use on equipment Registered symbols (available at: http:/www.graphical-symbols.info) 3 Terms and definitions For the purposes of th

45、is document, the terms and definitions given in IEC 60050-815 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.

46、iso.org/obp 8 IEC 61788-22-1:2017 IEC 2017 3.1 additional positive feedback APF method enhancing voltage-flux transformation ratio by using resistance and coupling coil to SQUID ring 3.2 critical current modulation parameter Lparameter defined by 2LI c / 0 , where L is the SQUID washer inductance, I

47、 cis the critical current of a Josephson junction, for DC SQUIDs, and a parameter defined by 2 LI c / 0for RF SQUIDs Note 1 to entry: The term “shielding parameter“ can also be used. 3.3 Stewart-McCumber parameter Cparameter defined by 2 I c R n 2 C/ 0 , where R nis the normal state resistance of a

48、Josephson junction, and C is the capacitance of a Josephson junction 3.4 bridge junction junction formed from two superconductors connected by a superconducting bridge of small section Note 1 to entry: The term “microbridge“ can also be used. 3.5 critical current I cmaximum direct current that can b

49、e regarded as flowing through a Josephson junction without resistance 3.6 critical current density J ccritical current divided by the cross-section of the conductor or the junction area of the Josephson junction 3.7 feedback coil coil that is inductively coupled to a SQUID operated in the flux locked loop (FLL) mode 3.8 flux locked loop FLL method that improves linearity and dynamic range of a SQUID by using negative feedback to keep the const