IEC 62196-1-2014 Plugs socket-outlets vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 General requirements《插头 电气插座 车辆连接器和车辆引入线.电动车导电充电.第1部分 一般要求》.pdf

1、 IEC 62196-1 Edition 3.0 2014-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General requirements Fiches, socles de prise de courant, prises mobiles de vhicule et socles de connecteur de vhi

2、cule Charge conductive des vhicules lectriques Partie 1: Rgles gnrales IEC 62196-1:2014-06(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or

3、by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this pu

4、blication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectroniq

5、ue ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou co

6、ntactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that

7、prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might hav

8、e been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publi

9、cations search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up t

10、o date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in

11、English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clau

12、se of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Serv

13、ice Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu

14、technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes i

15、nternationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de r

16、frence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en lign

17、e et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel

18、 Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extr

19、aites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62196-1 Edition 3.0 2014-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Plug

20、s, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General requirements Fiches, socles de prise de courant, prises mobiles de vhicule et socles de connecteur de vhicule Charge conductive des vhicules lectriques Partie 1: Rgles gnrales INTERNATIO

21、NAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XC ICS 29.120.30, 43.120 PRICE CODE CODE PRIX ISBN 978-2-8322-1666-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that

22、you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62196-1:2014 IEC 2014 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2 Normative references 9 3 Terms and definitions 11 4 General .

23、19 4.1 General requirements . 19 4.2 General notes on tests 19 5 Ratings 20 5.1 Preferred rated operating voltage ranges 20 5.2 Preferred rated currents 20 General . 20 5.2.1Rated current for signal or control purposes 20 5.2.2Accessories not suitable for making and breaking an electrical circuit 5.

24、2.3 under load . 21 Accessories suitable for, or not suitable for, making and breaking an 5.2.4 electrical circuit under load 21 6 Connection between the power supply and the electric vehicle 21 6.1 General . 21 6.2 Types of vehicle inlets 21 6.3 Types of vehicle connectors 21 6.4 Universal interfac

25、e 22 6.5 Basic interface 23 6.6 D.C. configurations . 24 6.7 Combined interface . 25 6.8 Contact sequencing 26 7 Classification of accessories 26 7.1 According to purpose 26 7.2 According to the method of connecting the conductors 27 7.3 According to serviceability 27 7.4 According to electrical ope

26、ration . 27 7.5 According to interface . 27 7.6 According to use with cable management systems 27 7.7 According to the locking and interlock functions: . 27 According to locking facilities . 27 7.7.1According to interlock facilities: . 27 7.7.2 7.8 According to the presence of shutter(s) . 27 8 Mark

27、ing . 27 9 Dimensions . 29 10 Protection against electric shock . 30 11 Size and colour of protective earthing conductors 35 12 Provisions for protective earthing 35 13 Terminals 37 13.1 Common requirements 37 13.2 Screw type terminals . 40 IEC 62196-1:2014 IEC 2014 3 13.3 Mechanical tests on termin

28、als . 43 14 Interlocks. 45 14.1 Accessories with interlock . 45 14.2 Accessories with integral switching device 49 14.3 Control circuit devices and switching elements . 49 14.4 Pilot contacts and auxiliary circuits . 49 15 Resistance to ageing of rubber and thermoplastic material 50 16 General const

29、ruction . 50 17 Construction of socket-outlets . 53 17.1 General . 53 17.2 Contact tubes . 53 18 Construction of plugs and vehicle connectors 55 19 Construction of vehicle inlets . 56 20 Degrees of protection 56 21 Insulation resistance and dielectric strength 58 22 Breaking capacity 59 23 Normal op

30、eration . 62 24 Temperature rise . 63 25 Flexible cables and their connection 65 25.1 Strain relief . 65 25.2 Requirements for plugs and vehicle connectors 65 Non-rewirable plugs and vehicle connectors 65 25.2.1Rewirable plugs and vehicle connectors 65 25.2.2 25.3 Plugs and vehicle connectors provid

31、ed with a flexible cable 66 26 Mechanical strength 67 26.1 General . 67 26.2 Degree of protection . 68 26.3 Rewirable plugs and vehicle connectors 69 26.4 Non-rewirable accessories 70 26.5 Cable glands . 72 26.6 Shutters 72 26.7 Insulated end caps 72 26.8 Change of temperature test. 73 26.9 Pull tes

32、t 73 27 Screws, current-carrying parts and connections . 73 28 Creepage distances, clearances and distances . 76 29 Resistance to heat, to fire and to tracking 77 30 Corrosion and resistance to rusting . 79 31 Conditional short-circuit current withstand test. 79 31.1 General . 79 31.2 Ratings and te

33、st conditions . 79 31.3 Test circuit 80 31.4 Calibration 83 31.5 Test procedure 83 31.6 Behaviour of the equipment under test 83 31.7 Acceptance conditions 84 4 IEC 62196-1:2014 IEC 2014 32 Electromagnetic compatibility 84 32.1 Immunity . 84 32.2 Emission . 84 33 Vehicle driveover . 84 Bibliography

34、86 Figure 1 Diagram showing the use of the accessories 11 Figure 2 Examples of terminals 16 Figure 3 Standard test finger 31 Figure 4 Gauge “A” for checking shutters . 33 Figure 5 Gauge “B” for checking shutters . 34 Figure 6 Gauges for testing insertability of round unprepared conductors having the

35、 maximum specified cross-section 41 Figure 7 Equipment test arrangement 43 Figure 8 Apparatus for checking the withdrawal force 47 Figure 9 Verification of the latching device . 48 Figure 10 Circuit diagrams for breaking capacity and normal operation tests . 61 Figure 11 Apparatus for testing the ca

36、ble anchorage . 66 Figure 12 Ball Impact test 68 Figure 13 Arrangement for mechanical strength test for plugs and vehicle connectors 70 Figure 14 Apparatus for flexing test . 71 Figure 15 Diagram of the test circuit for the verification of short-circuit current withstand of a two-pole equipment on a

37、 single-phase a.c. or d.c. 81 Figure 16 Diagram of the test circuit for the verification of short-circuit current withstand of a three-pole equipment . 82 Figure 17 Diagram of the test circuit for the verification of short-circuit current withstand of a four-pole equipment . 83 Table 1 Compatibility

38、 of mating accessories at vehicle . 22 Table 2 Overview of the universal vehicle interface 23 Table 3 Overview of the basic vehicle interface 24 Table 4 Overview of the d.c. vehicle interface 25 Table 5 Overview of the combined a.c./d.c. vehicle interface . 26 Table 6 Short-time test currents . 36 T

39、able 7 Size for conductors . 37 Table 8 Values for flexing under mechanical load test 44 Table 9 Value for terminal pull test . 45 Table 10 Withdrawal force with respect to ratings 49 Table 11 Cable length used to determine pull force on retaining means . 51 Table 12 Gauges to measure withdrawal for

40、ce . 54 Table 13 Diameter of pins of the test plug 54 Table 14 Maximum withdrawal force 55 Table 15 Test voltage for dielectric strength test 59 Table 16 Breaking capacity 62 IEC 62196-1:2014 IEC 2014 5 Table 17 Normal operation . 63 Table 18 Test current and nominal cross-sectional areas of copper

41、conductors for temperature rise test . 64 Table 19 Pull force and torque test values for cable anchorage 67 Table 20 Impact energy for ball impact test 69 Table 21 Mechanical load flexing test 71 Table 22 Torque test values for glands 72 Table 23 Pulling force on insulated end caps . 73 Table 24 Tig

42、htening torque for verification of mechanical strength of screw-type terminals . 74 6 IEC 62196-1:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS CONDUCTIVE CHARGING OF ELECTRIC VEHICLES Part 1: General requirements FOREWORD 1) T

43、he International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical a

44、nd electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical c

45、ommittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizatio

46、n for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commi

47、ttee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is

48、 accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and r

49、egional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IE