IEEE 1240-2000 en Guide for the Evaluation of the Reliability of HVDC Converter Stations《高压直流输电(HDVC)换流站可靠性的评估指南》.pdf

1、The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2001 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 13 February 2001. Printed in the United States of America.Print: ISBN 0-7381-2504-0 SH9486

2、1PDF: ISBN 0-7381-2509-9 SS94861No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.IEEE Std 1240-2000 (R2012)IEEE Guide for the Evaluation of the Reliability of HVDC Converter StationsSponso

3、rSubstations Committeeof theIEEE Power Engineering SocietyReaffirmed 29 March 2012Approved 8 August 2000IEEE-SA Standards BoardAbstract: This guide is intended to serve high-voltage direct current (HVDC) converter stationreliability by suggesting significant objectives, design, operation, monitoring

4、, and specificationdetails. This guide includes the CIGR performance protocol and reliability-related mathematicalconcepts.Keywords: availability, converter, HVDC, maintainability, transmission, RAM, reliabilityNotice and Disclaimer of Liability Concerning the Use of IEEE Documents: IEEE Standards d

5、ocuments are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together vo

6、lunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not

7、 independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. Use of an IEEE Standard is wholly voluntary. IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether spe

8、cial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon any IEEE Standard document. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims any express or im

9、plied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained in its standards is free from patent infringement. IEEE Standards documents are supplied “AS IS.“ The existence of an IEEE Standard does not imply that there

10、 are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of th

11、e art and comments received from users of the standard. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholl

12、y reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. N

13、or is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a comp

14、etent professional in determining the appropriateness of a given IEEE standard. Translations: The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the

15、 approved IEEE standard. Official Statements: A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as,

16、a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on Standar

17、ds: Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the f

18、orm of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important to ensure that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and

19、 the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. Any person who would like to participate in evaluating comments or revisions to an IEEE stand

20、ard is welcome to join the relevant IEEE working group at http:/standards.ieee.org/develop/wg/. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Photocopies: Authorization to photocopy portions of any indivi

21、dual standard for internal or personal use is granted by The Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Ros

22、ewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2001 IEEE. All rights reserved. iiiIntroduction(This introduction is not part of IEEE

23、1240-2000, IEEE Guide for the Evaluation of the Reliability of HVDC ConverterStations.)Along with the widely recognized maturity and general acceptance of high-voltage direct current (HVDC)transmission, interest in related reliability concepts is growing. Quantitative reliability requirements andgua

24、rantees are found in many HVDC converter specifications and contracts.This guide covers various aspects of HVDC converter station reliability, put together by a diverse group ofexperts. The bibliography includes a summary of North American HVDC converter station reliabilityspecifications. The CIGR “

25、Protocol for Reporting the Operational Performance of HVDC TransmissionSystems” is included as a set of informative annexes to this guide, reprinted with the permission of CIGRStudy Committee 14. A note on the foundations for RAM (Reliability, Availability and Maintainability)calculations is also ca

26、ptured in an annex, and explains some of the underlying mathematical concepts.The principles and methods presented in this guide apply, at least in part, to other FACTS stations as well.Thisguide was prepared by Working Group I7, Reliability of HVDC Converter Stations, in the High VoltagePower Elect

27、ronics Stations Subcommittee for the IEEE-PES Substations Committee. At the time this guidewas completed, the Working Group for Reliability of HVDC Converter Stations had the followingmembership:F. John Hormozi, ChairGerhard Juette, Vice-ChairOther individuals who have contributed review and comment

28、s follow:The following members of the balloting committee voted on this guide:Jacques AllaireMichael BakerHubert BilodeauJack ChristofersenBen DamskyJohn JoyceCharles HeisingWilliam LiverantDuane TorgersonIvars VancersGene WolfPaul AlbrechtVic BurtnykDon ChristieClaude DurandWilliam KramerSastry Kur

29、ugantyPat McDowellKarl MortensenMarius TaubeHanna E. AbdallahWilliam J. AckermanMichael J. BioDennis L. CarrSimon R. ChanoFrank A. DenbrockW. Bruce DietzmanGary R. EngmannDavid L. HarrisFarshad HormoziRobert JeanjeanGeorge G. KaradyKamran KhanHermann KochH. Peter LipsA.P. Sakis MeliopoulosAbdul M. M

30、ousaCarlos O. PeixotoPercy E. PoolDavid ShaferShigeru TanabeEdgar R. Taylor, Jr.Duane R. Torgersoniv Copyright 2001 IEEE.All rights reserved.When the IEEE-SA Standards Board approved this standard on 8 August 2000, it had the followingmembership:Donald N. Heirman, ChairJames T. Carlo, Vice ChairJudi

31、th Gorman, Secretary*Member EmeritusAlso included is the following nonvoting IEEE-SA Standards Board liaison:Alan Cookson, NIST RepresentativeDonald R. Volzka, TAB RepresentativeGreg KohnIEEE Standards Project EditorSatish K. AggarwalMark D. BowmanGary R. EngmannHarold E. EpsteinH. Landis FloydJay F

32、orster*Howard M. FrazierRuben D. GarzonJames H. GurneyRichard J. HollemanLowell G. JohnsonRobert J. KennellyJoseph L. Koepfinger*Peter H. LipsL. Bruce McClungDaleep C. MohlaJames W. MooreRobert F. MunznerRonald C. PetersenGerald H. PetersonJohn B. PoseyGary S. RobinsonAkio TojoDonald W. ZipseCopyrig

33、ht 2001 IEEE. All rights reserved. vContents1. Overview 11.1 Scope 11.2 Purpose. 12. References 13. Definitions . 24. RAM objectives. 44.1 The role of human reliability . 44.2 Energy availability. 54.3 Putting together a total RAM package. 54.4 The ultimate RAM goal. 65. Design and documentation. 65

34、.1 General design principles. 65.2 More detailed design principles. 75.3 Software design principles. 85.4 Operation and maintenance manuals. 95.5 RAM records 106. Operation . 106.1 Training 106.2 Maintenance programs affecting reliability. 116.3 Spare parts 127. RAM performance monitoring 157.1 Moni

35、toring and evaluation periods 157.2 Monitoring procedures. 157.3 Evaluation procedures 168. Considerations for RAM specifications. 178.1 HVDC converter stations located at remote generating stations.178.2 Back-to-back HVDC converter stations 188.3 Parameters to consider for energy availability and r

36、eliability. 188.4 Contract administration for energy availability and reliability 21Annex A (informative) Bibliography . 23Annex B (informative) CIGR s “Protocol for Reporting the Operational Performance of HVDCTransmission Systems” . 24Annex C (informative) CIGRs “Protocol for Reporting the Operati

37、onal Performance of HVDCTransmission Systems”An example of an outage log. 40Annex D (informative) Fault classification code47Annex E (informative) CIGRs “Protocol for Reporting the Operational Performance of HVDCTransmission Systems”Tables 48Annex F (informative) Foundations for RAM calculations . 5

38、7Copyright 2001 IEEE. All rights reserved. 1IEEE Guide for the Evaluationof the Reliability ofHVDC Converter Stations1. Overview1.1 ScopeThis document promotes the concepts of reliability, availability, and maintainability (RAM) as applicable tothe design, operation, and specification of high-voltag

39、e direct current (HVDC) converter stations.1.2 PurposeThe purpose of this guide is to help improve the reliability of HVDC converter stations through prudentapplication of RAM concepts to all phases of HVDC projects.More specifically, this guide intends to provide help in the following areas:a) Impr

40、oving HVDC RAM for converter stations already in service.b) Calculating and comparing RAM of different converter station designs.c) Calculating and reducing RAM costs of HVDC converter stations.d) Reducing spare parts requirements of HVDC converter stations.e) Improving HVDC converter specifications

41、.Toward these ends, this guide introduces basic RAM theory and calculations; provides guidelines on design,operation, and performance monitoring; and offers considerations for RAM specifications of HVDCconverter stations.2. ReferencesThis guide shall be used in conjunction with the following publica

42、tions: When the following specificationsare superseded by an approved revision, the revision shall apply.IEEEStd 1240-2000 IEEE GUIDE FOR THE EVALUATON OF2 Copyright 2001 IEEE.All rights reserved.CIGR Study Committee 14DC Links, #14-97 (WG 04-21), Protocol for Reporting the OperationalPerformance of

43、 HVDC Transmission Systems.1IEC 60633 (1998:12), Terminology for high-voltage direct current (HVDC) transmission.2IEEE Std 352-1987 (Reaff 1999), IEEE Guide for General Principles of Reliability Analysis of NuclearPower Generating Station Safety Systems.3IEEE Std 493-1997, IEEE Recommended Practice

44、for the Design of Reliable Industrial and CommercialPower Systems (IEEE Gold Book).IEEE Std 730-1989 (Reaff 1999), IEEE Standard for Software Quality Assurance Plans.IEEE Std 762-1987 (Reaff 1992), IEEE Standard Definitions for Use in Reporting Electric Generating UnitReliability, Availability, and

45、Productivity.IEEE Std 829-1998, IEEE Standard for Software Test Documentation.IEEE Std 859-1987 (Reaff 1993), IEEE Standard Terms for Reporting and Analyzing Outage Occurrencesand Outage States of Electrical Transmission Facilities.IEEE Std 982.1-1988, IEEE Standard Dictionary of Measures to Produce

46、 Reliable Software.IEEE Std 982.2-1988, IEEE Guide for the Use of IEEE Standard Dictionary of Measures to ProduceReliable Software.IEEE Std 1008-1987 (Reaff 1993), IEEE Standard for Software Unit Testing.IEEE Std 1012-1998, IEEE Standard for Software Verification and Validation.IEEE Std 1028-1997, I

47、EEE Standard for Software Reviews.IEEE Std 1058.1-1987, IEEE Standard for Software Project Management.NOTEThe CIGR Working Group 14-04 reliability definitions and performance reporting system are considered apart of this guide and included in their entirety in Annex B, Annex C, Annex D, and Annex E.

48、3. DefinitionsFor this guide, the following terms and definitions apply. IEEE 100, The Authoritative Dictionary of IEEEStandards Terms B11 should be consulted for terms not defined in this clause. Where the use of anexpression in this guide differs from that implied in the dictionary or in other pub

49、lished references, theintended meaning is clear from the context.3.1 actual outage duration (AOD): The elapsed time between the beginning and the end of a power orenergy capacity reduction.1CIGR publications are available from CIGR, 21 rue dArtois, 75 008 Paris, France (http:/www.cigre.org).2IEC publications are available from the Sales Department of the International Electrotechnical Commission, Case Postale 131, 3, ruede Varemb, CH-1211, Genve 20, Switzerland/Suisse (http:/www.iec.ch/). IEC publications are also available in the United Statesfrom the Sales