IEEE 1716-2014 en Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical Facilities《管理自.pdf

1、 IEEE Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical Facilities Sponsored by the Petroleum and Chemical Industry Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Industry Applications Society IEEE Std 1716-

2、2014 IEEE Std 1716-2014 IEEE Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical Facilities Sponsor Petroleum and Chemical Industry Committee of the IEEE Industry Applications Society Approved 12 June 2014 IEEE-SA Standards

3、Board Abstract: Recommendations and guidelines for managing natural disaster impact on key electrical facilities and systems in petroleum and chemical facilities are provided in order to minimize economic damage by pre-assessment risk evaluation of electrical facilities, by identification of mitigat

4、ion techniques and system designs to minimize impact, and by outlining procedures for faster recovery of electrical systems after a natural disaster. Keywords: disaster emergency management, IEEE 1716, recovery The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 1

5、0016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 12 August 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accu

6、racy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE stan

7、dard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through d

8、evelopments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by an

9、y other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness

10、 of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON A

11、NY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Transl

12、ations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not

13、processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educatio

14、nal courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from a

15、ny interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting c

16、omments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able t

17、o provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevan

18、t IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provision

19、s of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is n

20、ot in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private

21、 uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any

22、 rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for paym

23、ent of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updat

24、ing of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point i

25、n time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to con

26、clude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been a

27、mended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at htt

28、p:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that i

29、mplementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a stat

30、ement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compen

31、sation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for iden

32、tifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agre

33、ements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Associatio

34、n. Copyright 2014 IEEE. All rights reserved. vi Participants At the time this IEEE recommended practice was completed, the Managing Natural Disaster Impact and Recovery Working Group had the following membership: Edward J. Thornton, Chair Larry H. Stahl, Vice Chair Eddie Guidry Danny Liggett Kevin L

35、ippert Wahab Mehmood Daleep Mohla Josh Popp Elvin Rochez The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Robert Arno W. J. (Bill) Bergman Thomas Bishop Thomas Blair Rudy Bright Chris Br

36、ooks Kent Brown William Bush William Byrd Paul Cardinal Weijen Chen Keith Chow Glenn Davis Gary Donner Douglas Dorr Marcus Durham Robert Durham H. Landis Floyd Carl Fredericks Pamela Gold Randall Groves Paul Hamer Lee Herron Scott Hietpas Werner Hoelzl Chad Kennedy Yuri Khersonsky Royce King Jim Kul

37、chisky Saumen Kundu Benjamin Lanz Michael Lauxman Albert Livshitz Ahmad Mahinfallah John Mcalhaney, Jr. William McBride James Mitchem Daleep Mohla William Moncrief Daniel Neeser Arthur Neubauer Michael Newman Lorraine Padden Richard Paes K. James Phillips Bartien Sayogo Robert Schuermann Gilad Shosh

38、ani David Singleton Larry Stahl Paul Sullivan Edward Thornton John Vergis Kenneth White Copyright 2014 IEEE. All rights reserved. vii When the IEEE-SA Standards Board approved this recommended practice on 12 June 2014, it had the following membership: John Kulick, Chair Jon Rosdahl, Vice Chair Rich

39、Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplin Stephen Dukes Jean-Philippe Faure Gary Hoffman Mike Janezic Jeffrey Katz Joseph Koepfinger* David Law Hung Ling Oleg Logvinov Ted Olsen Glenn Parsons Ron Petersen Adrian Stephens Peter Sutherland Y

40、atin Trivedi Phil Winston Don Wright Yu Yuan*Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Dick DeBlasio, DOE Representative Mike Janezic, NIST Representative Michelle Turner IEEE-SA Content Publishing Lisa Perry IEEE-SA Standards Technical Community Cop

41、yright 2014 IEEE. All rights reserved. viii Introduction This introduction is not part of IEEE Std 1716-2014, IEEE Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical Facilities. Recommendations and guidelines for managing n

42、atural disaster impact on key electrical facilities and systems in petroleum and chemical facilities are provided in order to minimize economic damage by pre-assessment risk evaluation of electrical facilities, by identification of mitigation techniques and system designs to minimize impact, and by

43、outlining procedures for faster recovery of electrical systems after a natural disaster. Copyright 2014 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 General 1 1.2 Scope . 2 1.3 Purpose 2 2. Definitions 2 3. Emergency management planning process . 2 3.1 General 2 3.2 Planning team 3 3.3 R

44、isk assessment: analyze potential hazards, vulnerabilities, and capabilities . 3 3.4 Develop the plan 4 3.5 Implement the plan 6 4. Functional requirements during the disaster . 7 4.1 Personnel and community safety . 7 4.2 Equipment safety . 7 5. Recovery and restoration process . 7 5.1 Damage asses

45、sment . 7 5.2 Establish priorities . 8 5.3 Equipment repair versus replacement 8 5.4 Safety and isolation . 9 5.5 Reenergizing to normal 9 6. Lessons learned 9 6.1 General 9 6.2 Comprehensive planning is essential . 9 6.3 Anticipate disruptions in communication services 9 6.4 Strategic components st

46、aging 10 6.5 People are a facilitys greatest asset 10 6.6 External resources and equipment availability limited 10 6.7 Standardize system design . 10 Annex A (informative) Example of a site emergency management planning team . 11 Annex B (informative) Example of a risk assessment matrix 12 Annex C (

47、informative) Example of a hurricane recovery procedure 13 Annex D (informative) List of disaster recovery management websites 17 Annex E (informative) Bibliography 18 Copyright 2014 IEEE. All rights reserved. 1 IEEE Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems

48、and Installations in Petroleum and Chemical Facilities IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are resp

49、onsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaime