1、 IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above Sponsored by the Corporate Advisory Group IEEE Substations Committee IEEE Switchgear Committee IEEE Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE-SA Board of Governors and IEEE Pow
2、er and Energy Society IEEE Std 1860-2014 IEEE Std 1860-2014 IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above Sponsor Corporate Advisory Group of the IEEE Board of Governors and IEEE Substations Committee IEEE Switchgear Committee IEEE Transformers Committee o
3、f the IEEE Power and Energy Society Approved 27 March 2014 IEEE-SA Standards Board Abstract: This guide applies to voltage and reactive power control in 1000 kV and above ac systems. It establishes criteria and requirements for electric power utilities in the planning, design, infrastructure, operat
4、ion, and scientific research of voltage or reactive power in 1000 kV and above ac systems, which should guarantee the system stability and equipment safety. Keywords: 1000 kV ac, IEEE 1860TM, reactive power balance, ultra-high voltage, voltage adjustment, voltage deviation, voltage and reactive powe
5、r, voltage regulating The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 18 July 2014. Printed in the United States of America. IEEE is a
6、registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are suppl
7、ied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the v
8、iewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or oth
9、er services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given cir
10、cumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF S
11、UBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EV
12、EN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE sh
13、ould be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be co
14、nsidered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal
15、 position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for ch
16、anges in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests
17、 For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation reque
18、sts. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users
19、of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable
20、 regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international
21、copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making th
22、ese documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual st
23、andard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individ
24、ual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from tim
25、e to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years.
26、 When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any I
27、EEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. Fo
28、r more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users ar
29、e encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or v
30、alidity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance ma
31、y indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent
32、 Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
33、 conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights,
34、 is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the first subgroup of the Ultra-High Voltage AC Standards Working Group had the following membership: Shiying Ma, Chair Shicong Ma,
35、Secretary Raj Ahuja Hans Candia Weijiang Chen Yong Chen Denis Dufournet Ken Edwards Francois Gallon Jianbo Guo Hiroyuki Hama Jian He Yoshihiro Ishizaki Hiroki Ito Hermann Koch Edelhard Kynast Liuling Li Qunju Li Makoto Miyashita Masatomo Ono Yukiyasu Shirasaka Huadong Sun Xiaojun Tang Kyoichi Uehara
36、 Xiaogang Wang Yating Wang Lihua Wu Ping Wu Zutao Xiang Yonghua Yin Pingliang Zeng The Working Group gratefully acknowledges the contributions of the following entities and participants. Without their assistance and dedication, this standard would not have been completed. The following entities subm
37、itted technical contributions or commented of the draft standard at various stages of the project development. Alstom Grid Bonneville Power Administration Electric Power Research Institute, Inc. (EPRI) Hitachi, Ltd. Japan AE Power Systems Corporation Mitsubishi Electric Corporation Quanta Technology
38、 LLC Siemens Corporation State Grid Corporation of China (SGCC) Toshiba Corporation Waukesha Electric Systems, Inc. The following members of the entity balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. ABB, Inc. Alstom BII Group Holdings Ltd
39、 Bonneville Power Administration China Datang Corporation Marvell Semiconductor, Inc. Mitsubishi Electric Corporation Quanta Technology, LLC Siemens Corporation Southwest Jiaotong University State Grid Corporation of China (SGCC) Toshiba Corporation Waukesha Electric Systems, Inc. Copyright 2014 IE
40、EE. All rights reserved. vi When the IEEE-SA Standards Board approved this guide on 27 March 2014, it had the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Ste
41、phen Dukes Jean-Philippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David Law Hung Ling Oleg Logvinov Ted Olsen Glenn Parsons Ron Peterson Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvot
42、ing IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina, IEEE-SA Content Publishing Soo H. Kim IEEE-SA Standards Technical Community Copyright 2014 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE St
43、d 1860-2014, IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above. With the extension of voltage levels, the security and reliability of high-voltage level electric equipment and power system are facing new challenges. There is a critical need to have a series of
44、 consensus technical criteria and requirements for voltage regulation and reactive power compensation for 1000 kV and above ac system to guarantee the reliability and safety operation of entire power system. 1000 kV ac transmission systems have been established and operated with full voltage in Chin
45、a; however, there is still a lack of suitable 1000 kV and above ac transmission system operation procedures and technical information for regulating voltage and compensating reactive power. Therefore, it is necessary to formulate a series of consensus technical requirements and criteria so as to fac
46、ilitate the development of ultra-high voltage ac systems and ensure their normal operation. This guide comprises 12 clauses and 6 annexes. Main content includes admissible voltage deviation, the characteristics of voltage and reactive power, basic principles, procedure of reactive power compensation
47、 shunt compensation on the high-voltage side, shunt compensation on the low-voltage side, voltage regulating method and range of transformers, reactive power control of generators, and adjustment for operating voltage. Copyright 2014 IEEE. All rights reserved. viii Contents 1. Scope 12. Normative r
48、eferences 13. Definitions and acronyms . 23.1 Definitions . 2 3.2 Acronyms and abbreviations . 2 4. Admissible voltage deviation . 35. Characteristics of voltage and reactive power 35.1 Charging reactive power of UHV transmission lines 3 5.2 Reactive power loss of UHV lines . 3 6. General principles
49、 . 47. Configuration of reactive power compensation 58. Shunt reactive power compensation on the UHV side . 68.1 Basic function 6 8.2 Configuration . 7 8.3 The application of the controllable shunt reactor. 7 9. Shunt reactive power compensation on the tertiary side of UHV transformers 99.1 Function . 9 9.2 Configuration . 9 9.3 Dynamic reactive compensation .11 10. Voltage regulation of UHV transformers 1110.1 Voltage regulation by transformer tap changes 11 10.2 Identification of transformer taps .11 10.3 Voltage selection for each side of transformers 11 11. Generator reactiv
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1