IEEE 1871 1-2014 en Recommended Practice for Using IEEE 1671 2 Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instrume.pdf

1、 IEEE Recommended Practice for Using IEEE 1671.2TMInstrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters Sponsored by the IEEE Standards Coordinating Committee 20 o

2、n Test and Diagnosis for Electronic Systems IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Standards Coordinating Committee 20IEEE Std 1871.1-2014IEEE Std 1871.1-2014 IEEE Recommended Practice for Using IEEE 1671.2 Instrument Description Templates for Describing Synthetic Instrumentation for Cl

3、asses of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters Sponsored by the IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems Approved 10 December 2014 IEEE-SA Standards Board Abstract: Instrument Description tem

4、plates, compliant with IEEE Std 1671.2-2012, that providers of synthetic instruments should use to describe waveform generators, digitizers, external local oscillators, and up and down converters are provided in this recommended practice. These synthetic instruments may be integrated in an automatic

5、 test system (ATS) that is to be used to test and diagnose a unit under test (UUT). Keywords: ATML instance document, ATS, automatic test equipment (ATE), Automatic Test Markup Language (ATML), automatic test system, IEEE 1671.2, IEEE 1871.1, instrument, instrumentation, synthetic instrument, XML sc

6、hema The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 February 2015. Printed in the United States of America. IEEE is a registered tr

7、ademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” a

8、nd “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expr

9、essed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services f

10、or, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or

11、, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOO

12、DS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED

13、 OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be consi

14、dered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to b

15、e, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of

16、IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in docu

17、ments should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this re

18、ason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any pers

19、on who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Stand

20、ards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory r

21、equirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright law

22、s. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents

23、 available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for co

24、mpany or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard

25、for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time thr

26、ough the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a docum

27、ent is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.

28、 In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more inform

29、ation about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged

30、to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of an

31、y patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate wh

32、ether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may e

33、xist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions p

34、rovided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely

35、their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE recommended practice was completed, the 1871.1 Working Group had the following membership: Mike Seavey, Chair Chris Gorringe Chatwin Landsdowne Teresa Lopes Scott Mis

36、cha Ion Neag John Sheppard John Stabler The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Malcom Brown Keith Chow David Droste William Frank Chris Gorringe Randall Groves Werner Hoelzl An

37、and Jain Yuri Khersonsky Teresa Lopes Edward McCall Mukund Modi Ion Neag Michael Newman Leslie Orlidge Bartien Sayogo Mike Seavey Joseph Stanco Walter Struppler Daidi Zhong Copyright 2015 IEEE. All rights reserved. vi When the IEEE-SA Standards Board approved this recommended practice on 10 December

38、 2014, it had the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplin Stephen Dukes Jean-Philippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger

39、* David J. Law Hung Ling Oleg Logvinov T. W. Olsen Glenn Parsons Ron Petersen Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janez

40、ic, NIST Representative Don Messina IEEE-SA Content Production and Management Patricia Gerdon IEEE-SA Technical Program Operations Copyright 2015 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 1871.1-2014, IEEE Recommended Practice for Using IEEE 1671.2 Instrum

41、ent Description Templates for Describing Synthetic Instrumentation for Classes of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters. The Synthetic Instrument Working Group (SIWG) was formed, at Department of Defense request, to define synthetic ins

42、trumentation and its attributes. The SIWG also developed a framework that balances user and supplier objectives, facilitates rapid technology advancements and adaption throughout the test life cycle, and complements/supports other relevant test and measurement industry activities. The goals or desir

43、ed effects of the SIWG activities were to: a) Reduce the total cost of ownership of the automatic test system (ATS). b) Reduce time to develop and field new or upgraded ATSs. c) Provide greater flexibility to the war fighter through the U.S. and coalition partners interoperable ATSs. d) Reduce the A

44、TSs logistics footprint. e) Reduce the ATSs physical footprint. f) Improve the quality of test. The SIWG addressed the reductions from the test and measurement perspective. The SIWG efforts resulted in both the definition of synthetic instruments and the specifications of their respective attributes

45、. Synthetic instruments were originally part of IEEE Std 1671.2-2008, as both an example of InstrumentDescription instances as well as to provide a definition of the necessary parameters/attributes to document a synthetic instrument as defined by the SIWG. Copyright 2015 IEEE. All rights reserved. v

46、iii Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 1.3 General 2 1.4 Application of this documents annexes 3 1.5 Usage . 3 1.6 XML template documents . 3 1.7 IEEE 1671.2 XML template documents 3 1.8 Application 3 1.9 Conventions used within this document 4 2. Normative references 5 3. Definition

47、s, acronyms, and abbreviations 5 3.1 Definitions . 5 3.2 Acronyms and abbreviations . 6 4. Synthetic instrumentation . 9 4.1 Digital-to-analog conversion 10 4.2 Analog-to-digital conversion 11 4.3 RF downconversion 11 4.4 RF upconversion .12 4.5 CPU, DSP, FPGA, memory 12 4.6 Signal conditioning and

48、switching 13 5. Waveform generator requirements and XML template instance .13 5.1 Synthetic instrument waveform generator requirements 13 5.2 Waveform generator XML template instance .66 6. Digitizer requirements and XML template instance 66 6.1 Synthetic Instrument digitizer requirements .66 6.2 Di

49、gitizer XML template instance .104 7. Down-converter requirements and XML template instance 105 7.1 Synthetic Instrument down-converter requirements .105 7.2 Down-converter XML template instance123 8. External local oscillator specifications 123 8.1 External LO requirements .123 9. Up converter/synthesizer requirements and XML template instance 126 9.1 Synthetic instrument Up converter/synthesizer requirements .126 9.2 Up converter/synthesizer XML template instance 160 Annex A (informative) Synthetic instrument XML template names and locations .161 Annex B (informat