IEEE C37 42-2016 en Specifications for High-Voltage ( 1000 V) Fuses and Accessories.pdf

1、IEEE Standard Specifications for High- Voltage (1000 V) Fuses and Accessories IEEE Std C37.42-2016 IEEE Power and Energy Society Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C37.42-2016 IEEE Standard Specifications for High-Voltage (1000 V) Fuses and A

2、ccessories Sponsor Switchgear Committee of the IEEE Power and Energy Society Approved 22 September 2016 IEEE-SA Standards BoardAbstract: Specifications for high voltage (above 1000 V) Class A and Class B expulsion and cur- rent-limiting fuses are detailed in this standard. They include: expulsion ty

3、pe Class A distribution class fuses, fuse cutouts, fuse disconnecting switches, their associated fuse links or refill units, disconnecting cutouts, and accessories for these devices with rated voltages from 1 kV through 38 kV; expulsion type Class B power class fuses, fuse disconnecting switches, th

4、eir associated fuse links or refill units, disconnecting cutouts, and accessories for these devices with rated voltag- es from 1 kV through 170 kV; class A and class B current-limiting fuses and accessories for these devices with rated voltages 1 through 38 kV; distribution and power class expulsion

5、, current-limit- ing, and combination-type external capacitor fuses and accessories, with rated voltages from 1 kV through 38 kV, for protecting shunt capacitors complying with IEEE Std 18 and NEMA CP 1; any of the above devices used in fuse enclosure packages; all of these devices are intended for

6、use on alternating current distribution systems. Keywords: Class A fuses, Class B fuses, current-limiting fuses, distribution and power class current-limiting fuses, distribution class fuses, distribution fuse cutouts, expulsion fuses, fuse, fuse applications, fuse disconnecting switches, fuse enclo

7、sure packages, fuses for the protection of shunt capacitors, fuse hooks, fuse links, high-voltage fuses, IEEE C37.42, power class fuses, supports and mountings, tongs The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institu

8、te of Electrical and Electronics Engineers, Inc. All rights reserved. Published 26 May 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness

9、of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other way

10、s to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comment

11、s received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person

12、 utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL

13、IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- T

14、RACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development

15、process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4 Copyright 2017 IEEE. All rights reserved. Official statements A statement, written or oral, that is

16、 not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or edu

17、cational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome f

18、rom any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate suppo

19、rting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Committees are

20、 not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join

21、the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with th

22、e provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge act

23、ion that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public

24、and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does

25、not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arr

26、ange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearanc

27、e Center.5 Copyright 2017 IEEE. All rights reserved. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri

28、- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has

29、 not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given

30、 document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ ieeexplore .ieee .or g/ xpl/ standards .jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE

31、s standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL fo

32、r errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in c

33、onnection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the

34、Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for

35、 which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provide

36、d in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely thei

37、r own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this standard was completed, the Revision of Fuse Specifications Standards Working Group had the following membership: Mark W . Stavnes,

38、Chair Alan Y erges, Vice Chair Chris Ambrose Glenn R. Borchardt Sam Chang Sterlin Cochran Jonathan H. Deverick Rodolfo Elizondo David L. Frisch Gary W. Haynes Frank C. Lambert John G. Leach Chris Lettow Bradley B. Lewis James R. Marek Sean W . Moody R. Neville Parry Timothy E. Royster Jon Spencer To

39、m Stefanski William Walter James Wenzel Charles Worthington The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Chris Ambrose Paul Barnhart Craig Befus Robert Behl Jean-Marc Biasse Glenn R. Borchardt C

40、hristopher Borck Clarence Bradley Gustavo Brunello William Byrd Paul Cardinal Gary Donner Edgar Dullni Rodolfo Elizondo Marcel Fortin David L. Frisch Mietek Glinkowski Edwin Goodwin Randall Groves John Harley Gary W. Haynes Richard Jackson John Kay Yuri Khersonsky Boris Kogan Jim Kulchisky Saumen Ku

41、ndu Frank C. Lambert John G. Leach Bradley B. Lewis William McBride Sean W . Moody Daniel Mulkey Michael Newman T. W . Olsen Lorraine Padden Iulian Profir Michael Roberts Timothy Robirds Charles Rogers Timothy E. Royster Thomas Rozek Bartien Sayogo Nikunj Shah Jerry Smith Jon Spencer Tom Stefanski J

42、ames Van De Ligt John Vergis William Walter John Wang James Wenzel Kenneth White Terry Woodyard Charles Worthington Alan Yerges When the IEEE-SA Standards Board approved this standard on September 22, it had the following membership: Jean-Philippe Faure, Chair Ted Burse, Vice-chair John D. Kulick, P

43、ast Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus