IEEE C57 134-2013 en Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers《干式变压器最高点温度测定IEEE指南》.pdf

1、 IEEE Guide for Determination ofHottest-Spot Temperature in Dry-Type Transformers Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.134-2013(Revision ofIEEE Std C57.134-2000) IEEE Std C57.134-2013 (Revision of IEEE Std C

2、57.134-2000) IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 11 December 2013 IEEE-SA Standards Board Abstract: Methodologies for determination of the steady-state winding hottest-spot temp

3、erature in dry-type distribution and power transformers with ventilated, sealed, solid cast, and encapsulated windings built in accordance with IEEE Std C57.12.01 and IEC 60726 are described in this guide. Converter transformers are not included in this guide. Keywords: ambient temperature, average

4、winding temperature rise, dry-type transformer, IEEE C57.134, production transformer, prototype transformer, temperature measurement, temperature sensors, transformer model, winding hottest-spot temperature The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016

5、-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 13 January 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accurac

6、y, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standar

7、d does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through deve

8、lopments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any o

9、ther person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of

10、 a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

11、THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translati

12、ons The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not pro

13、cessed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational

14、 courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any

15、interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comm

16、ents. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to p

17、rovide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant I

18、EEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions o

19、f any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not

20、in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private us

21、es. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any ri

22、ghts in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment

23、 of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating

24、 of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in t

25、ime consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclu

26、de that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amen

27、ded through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/

28、standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that impl

29、ementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a stateme

30、nt of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensat

31、ion or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identif

32、ying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreeme

33、nts are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.

34、Copyright 2014 IEEE. All rights reserved. vi Participants At the time this IEEE guide was completed, the Dry-Type Transformer Hottest-Spot Temperature Working Group had the following membership: Paulette Payne Powell, Chair Timothy Holdway Charles Johnson, Jr. Richard Marek The following members of

35、the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Samuel Aguirre I. Antweiler Javier Arteaga Robert Ballard Peter Balma Barry Beaster Steven Bezner Wallace Binder Thomas Bishop Thomas Blackburn Carl Bush Thomas Callsen Paul Car

36、dinal Gary Donner Randall Dotson Jorge Fernandez Daher Joseph Foldi Marcel Fortin Derek Foster Frank Gerleve Jalal Gohari Randall Groves Ajit Gwal David Harris Roger Hayes Gary Heuston Gary Hoffman Timothy Holdway Philip Hopkinson Charles Johnson, Jr. Lars Juhlin Laszlo Kadar John Kay Sheldon Kenned

37、y Joseph L. Koepfinger Jim Kulchisky Saumen Kundu John Lackey Chung-Yiu Lam Aleksandr Levin Richard Marek William McBride Daniel Mulkey Jerry Murphy Ryan Musgrove K. R. M. Nair Michael Newman Raymond Nicholas Lorraine Padden Klaus Papp Bansi Patel Dhiru Patel Wesley Patterson Paulette Payne Powell B

38、rian Penny Alvaro Portillo Lewis Powell Iulian Profir Johannes Rickmann Pierre Riffon Michael Roberts Charles Rogers Oleg Roizman John Rossetti Marnie Roussell Thomas Rozek Bartien Sayogo James Smith Jerry Smith David Stankes Gary Stoedter Robert Thompson John Vergis Tony Weekes Matthew Wilkowski Ji

39、an Yu Waldemar Ziomek When the IEEE-SA Standards Board approved this guide on 11 December 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael Will

40、iam Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Copyright 2

41、014 IEEE. All rights reserved. vii Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Julie Alessi IEEE-SA Content Publishing Erin Spiewak IEEE-SA Technical Community Programs Copyright 2014 IEEE. All

42、rights reserved. viii Introduction This introduction is not part of IEEE Std C57.134-2013, IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers. The hottest-spot allowance is a number used in industry standards to establish the average temperature rise for rating purpose

43、s. The rated ambient temperature and hottest-spot allowance are subtracted from the rated insulation temperature class to determine the average temperature rise to be confirmed by thermal testing. IEEE Std 1 states that the value of the hottest-spot allowance is arbitrary, difficult to determine, an

44、d depends on many factors, such as size and design of the equipment. Based on the 1944 experimental works of Stewart and Whitman, and Satterlee, standards used a hottest-spot allowance of 30 C for 80 C average temperature rise. The 30 C hottest-spot temperature allowance established in 1944 for 80 C

45、 average temperature rise was approximately correct for ventilated dry-type transformers produced at that time. The 220 C insulation temperature class, 150 C average temperature rise, was initially used in sealed units. For these units, the 30 C hottest-spot temperature allowance was probably correc

46、t due to operation in the hotter inside gas. The 1959 Loading Guide, ANSI Appendix C57.96, used rated load limiting hottest-spot temperatures to 150 C for ventilated units and 220 C for sealed units. In 1965, NEMA Standard TR 27 extended the 220 C insulation temperature class to ventilated units. In

47、 1979, IEEE Std C57.12.01 also adopted the 220 C insulation temperature class for ventilated units. In both these documents, the 30 C hottest-spot allowance for the 220 C insulation temperature class was retained. In 1989, IEEE Std C57.12.01 and the Loading Guide IEEE Std C57.96 used a constant 30 C

48、 hottest-spot allowance for all insulation temperature classes and all size transformers. By comparison, IEC 60726 (1982-01) used a variable hottest-spot allowance ranging from 5 C to 30 C. The winding hottest-spot temperature rise and average winding temperature rise are related by a ratio that is

49、dependent upon such factors as the following: a) Turn insulation b) Winding height c) Radial build d) Ventilating ducts From this relation, it is apparent that no single winding hottest-spot temperature allowance is applicable to all types and ratings of transformers due to the variability of factors affecting the winding hottest-spot temperature. Laboratory test results reported by Pierce in 1993 validate this finding. As a step to establishing appropriate temperature limits, the Dry-Type Hot-Spot Methodology Working Group members were encouraged to r