IEEE C57 159-2016 en Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems.pdf

1、IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation SystemsIEEE Std C57.159-2016IEEE Power and Energy SocietySponsored by the Transformers CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std C57.159-2016IEEE Guide on Transformers for Application in

2、Distributed Photovoltaic (DPV) Power Generation SystemsSponsor Transformers Committee of the IEEE Power and Energy SocietyApproved 15 May 2016IEEE-SA Standards BoardAbstract: General and specifi c recommendations on specifi cation, design, and application of liq-uid-immersed and dry-type transformer

3、s in distributed photovoltaic (DPV) power generation sys-tems for commercial, industrial, and utility systems are provided in this guide.Keywords: distributed power generation, electrostatic shield, harmonics, IEEE C57.159, impedance, inverter, photovoltaic, PV, transformer, winding connection diagr

4、amThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 3 November 2016. Printed in the United States of America.IEEE is a registered trademark

5、in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH

6、 ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at

7、the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on

8、behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appro

9、pri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SER

10、VICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE

11、POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the

12、approved IEEE standard.4Copyright 2016 IEEE. All rights reserved.Official statementsA statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees an

13、d shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rathe

14、r than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards documents. Su

15、ggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur-rence of a bal

16、ance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to in

17、terpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regul

18、ationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or referring to t

19、he applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S. and int

20、ernational copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. B

21、y making these documents available for use and adop-tion by public authorities and private users, IEEE does not waive any rights in copyright to the documents.PhotocopiesSubject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any ind

22、ividual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of

23、any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5Copyright 2016 IEEE. All rights reserved.Updating of IEEE Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the

24、issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An offi cial IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE stand

25、ard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly refl ect the present state of the art. Users are cautioned to check to

26、 determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/ or contact IEEE a

27、t the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/fi

28、ndstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE wi

29、th respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has fi led a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/pate

30、nts.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obta

31、in such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determin

32、ing whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the r

33、isk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2016 IEEE. All rights reserved.ParticipantsAt the time this guide was submitted to the IEEE-SA Standards Board for approval, the C57.159 Workin

34、g Group had the following membership:Hemchandra Shertukde, ChairMathieu Sauzay, Vice ChairAleksandr Levin, SecretaryDonald AyersEnrigue BetancourtMichael CravenNorman FieldCarlos GaytanAli GhafourianKenneth HardenPhilip HopkinsonBrad JensenCharles JohnsonChristoph JordaanSheldon KennedyJitendra Mamt

35、oraAbhinav MitraAmitav MukerjiAniruddha NarawaneMartin NavarroStephen OaksBranimir PetosicJarrod PrinceAmitabh SarkarSubhas SarkarJeffrey SchneiderSanjib SomCraig StiegemeierTroy TanakaVijay TendulkarKiran VedanteSukdhev WaliaJennifer YuPeter ZhaoThe following members of the individual balloting com

36、mittee voted on this guide. Balloters may have voted for approval, disapproval, or abstention.William AckermanSamuel AguirreDonald AyersRobert BallardThomas BarnesWallace BinderThomas BlackburnThomas BlairW. BoettgerPaul BomanThomas CallsenPaul CardinalArvind ChaudharyCraig ColopyNancy ConnellySteph

37、en ConradMamadou DiongDieter DohnalGary DonnerCliff ErvenJorge Fernandez DaherFredric FriendDarrell FurlongCarlos GaytanFrank GerleveAli GhafourianDavid GilmerJames GrahamRandall GrovesAjit GwalJ. HarlowRoger HayesPhilip HopkinsonRuben Inzunza FigueroaBrad JensenCharles JohnsonLaszlo KadarSheldon Ke

38、nnedyYuri KhersonskyAxel KraemerJim KulchiskySaumen KunduJohn LackeyChung-Yiu LamAleksandr LevinRichard MarekBrian McMillanMark McnallyJohn MillerDaleep MohlaCharles MorganDaniel MulkeyJerry MurphyRyan MusgroveAli Naderian JahromiK. R. M. NairMartin NavarroKris K NeildMichael NewmanRaymond NicholasD

39、hiru PatelBranimir PetosicDonald PlattsAlvaro PortilloLeslie RecksiedlerJohn RoachMichael RobertsCharles RogersOleg RoizmanJoseph RostronThomas RozekDinesh SankarakurupSteven SanoDaniel SauerBartien SayogoDevki SharmaHemchandra ShertukdeMark SiiraHyeong SimJeremy SmithJerry SmithMark SmithGary Smull

40、inSteve SnyderSanjib SomWayne StecClayton SticeTroy Alan TanakaSusmitha TarlapallyEd TeNyenhuisDavid TepenAlan TrautJames Van De LigtKiran VedanteJohn VergisJane VernerSukhdev WaliaReigh WallingJoe WatsonKenneth WhiteJames WilsonWilliam WimmerJian Yu7Copyright 2016 IEEE. All rights reserved.When the

41、 IEEE-SA Standards Board approved this guide on 15 May 2016, it had the following membership:Jean-Philippe Faure, ChairTed Burse, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiStephen DukesJianbin FanJ. Travis Griffi thGary HoffmanRonald W. Hotchk

42、issMichael JanezicJoseph L. Koepfi nger*Hung LingKevin LuAnnette D. ReillyGary RobinsonMehmet UlemaYingli WenHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus8Copyright 2016 IEEE. All rights reserved.IntroductionThis introduction is not part of IEEE Std C57.159-2016, IEEE Guide on Transform

43、ers for Application in Distributed Photovoltaic (DPV) Power Generation Systems.Transformers addressed in this guide are for the application in distributed photovoltaic (DPV) power gen-eration systems and generally belong to Class I transformers per IEEE Std C57.12.00 and Category I and II transforme

44、rs per IEEE Std C57.12.00 and IEEE Std C57.12.01. The guide focuses mainly on the inverter transformers of the DPV power generation systems that are connected to the inverters supplying ac voltage and current to the primary (LV) winding of the transformer.Presently known nominal voltage of these tra

45、nsformers is up to 36 kV and rated power is up to 4000 kVA. Transformers for DPV systems are gradually increasing in their numbers in the field due to the recent in-creased focus on renewable energy sources. These transformers are primarily used as step-up transformers but can be used as step-down t

46、ransformers as well. Transformers for DPV systems have a number of specific issues (requirements and constraints) that affect transformer design and application.This IEEE guide provides information to support specification, design, and application of these transformers by: Explaining concerns and di

47、fferences of DPV system application and providing specific operation and construction techniques to address these concerns and differences. Summarizing these considerations for the engineer specifying the transformer. Explaining specifics of transformers working with inverters in this application. P

48、roviding timely state-of-the-art guidance while critical technical details of these power systems are still evolving. Increasing awareness of the constraints of this application aiming at increasing reliability of DPV sys-tem transformers. Having a single document listing all issues related to the a

49、pplication and reference to the relevant ex-isting standards and guides. Avoiding pitfalls and failures as has happened in other new distributed power generation systems applications. The words “should” and “may” in this document refer to matters that are recommended or permissive but not mandatory.Describing and addressing the special needs of the DPV power generation systems, the guide will ensure that the transformers for these systems are effective and reliable and will fulfill a need of the solar energys grow-ing place in the renewable energy generation system