IEEE C62 69A-2017 en The Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment Amendment 1 Addition of Saturated Core Secondary Wi.pdf

1、 IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment Amendment 1: Addition of Saturated Core Secondary Winding Parameters Sponsored by the Surge Protective Devices Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Soc

2、iety IEEE Std C62.69a-2017 (Amendment to IEEE Std C62.69-2016)IEEE Std C62.69a-2017 (Amendment to IEEE Std C62.69-2016) 1 IEEE Standard for the Surge Parameters of Isolating Transformers used in Networking Devices and Equipment Amendment 1: Addition of Saturated Core Secondary Winding Parameters Spo

3、nsor Surge Protective Devices Committee of the IEEE Power and Energy Society Approved 23 March 2017 IEEE-SA Standards Board 2 Abstract: Added in this amendment is a new sub-clause, 4.5 Saturated core secondary winding parameters, to IEEE C62.69-2016. Test methods, test circuits, measurement procedur

4、es, and result treatment to determine the secondary winding resistance and saturated core inductance are given. Keywords: core-saturation, IEEE C62.69 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical

5、 and Electronics Engineers, Inc. All rights reserved. Published 14 July 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In

6、 addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, t

7、est, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from

8、 users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any

9、IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FO

10、R ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

11、 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the rev

12、iew of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. 4 Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Ope

13、rations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE st

14、andards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation wi

15、th IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of conce

16、rned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions excep

17、t in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submit

18、ted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance t

19、o any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents m

20、ay not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and reg

21、ulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject t

22、o payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Ce

23、nter, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. 5 Updating of IEEE Standards documents Users of IEEE Standards do

24、cuments should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document tog

25、ether with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do

26、not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or

27、errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE

28、 standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject

29、matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, th

30、en the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms an

31、d conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be

32、 required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this

33、 standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2017 IEEE. All rights reserved. Participant

34、s At the time this IEEE standard was completed, the Low Voltage Solid State Protective Components Working Group had the following membership: Michael Maytum, Chair Albert Martin, Vice Chair Tim Ardley Robert Ashton Frank Basciano Nisar Chaudhry Leonard Drewes Bob Fried Ernie Gallo Bogdan Klobassa Pe

35、ter Kobsa Wolfgang Oertel Thomas Tran William TravisThe following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Robert Ashton Frank Basciano Demetrio Bucaneg, Jr. Randall Groves Raymond Hill Werner Hoelzl John

36、 John Yuri Khersonsky Jim Kulchisky Albert Martin Michael Maytum Michael Newman Nick S. A. Nikjoo Wolfgang Oertel Lorraine Padden Branimir Petosic K. James Phillips Thomas Phipps Iulian Profir Thomas Rozek Bartien Sayogo Roger Verdolin John Vergis Jian Yu When the IEEE-SA Standards Board approved th

37、is amendment on 23 March 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L.

38、 Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus 7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C62

39、.69a-2017, IEEE Standard for the Surge Parameters of Isolating Transformers used in Networking Devices and EquipmentAmendment 1. Ferrite cored broadband signal transformers tend to saturate when a differential surge occurs across the primary winding. Core saturation causes the loss of primary windin

40、g to secondary winding coupling, shortening the transformed surge duration in the secondary winding circuit. The main surge stress occurs after the transformer core saturates and the key secondary winding parameters controlling this surge stress level are the secondary winding resistance and saturat

41、ed core inductance. This amendment adds a new sub- clause, 4.5 Saturated core secondary winding parameters, to IEEE C62.69-2016, which defines techniques for the determination of the secondary winding resistance and saturated core inductance. 8 Copyright 2017 IEEE. All rights reserved. Contents 4. C

42、haracteristics . 9 4.5 Saturated core secondary winding parameters . 9 5. Ratings . 13 9 Copyright 2017 IEEE. All rights reserved. IEEE Standard for the Surge Parameters of Isolating Transformers used in Networking Devices and Equipment Amendment 1: Addition of Saturated Core Secondary Winding Param

43、eters NOTEThe editing instructions contained in this amendment define how to merge the material contained therein into the existing base standard and its amendments to form the comprehensive standard. The editing instructions are shown in bold italic. Four editing instructions are used: change, dele

44、te, insert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing mater

45、ial. Insert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make changes in figures or equations by removing the existing figure or equation and replacing it with

46、a new one. Editing instructions, change markings, and this NOTE will not be carried over into future editions because the changes will be incorporated into the base standard. 4. Characteristics Insert new 4.5 immediately after 4.4 as follows: 4.5 Saturated core secondary winding parameters 4.5.1 General Under differential surge conditions, a saturating core signal transformer has a secondary winding surge let- through current that is typically triangular and can be described by three surge waveform parameters of front, peak, and decay as listed below: