IEEE 45.1-2017 - IEEE Recommended Practice for Electrical Installations on Shipboard--Design.pdf

1、 IEEE Recommended Practice for Electrical Installations on Shipboard Design Sponsored by the Petroleum fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: resu

2、lts; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and service

3、s related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards ava

4、ilable, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independe

5、nt judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQU

6、ENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OU

7、T OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE stan

8、dard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the offic

9、ial position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be consid

10、ered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or

11、advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and

12、 questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. F

13、or the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 4

14、45 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the stan

15、dard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approve

16、d standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and

17、 the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. 5 Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limite

18、d, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 US

19、A; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at

20、any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. E

21、very IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are caution

22、ed to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or con

23、tact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards

24、.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken

25、by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sas

26、b/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desi

27、ring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims,

28、 or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights

29、, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the P45.1 Working Group had

30、 the following membership: Dwight Alexander, Chair Robert Koebke, Vice Chair Timothy L. Gauthier, Secretary Moni Islam, Past Chair Mohammed Ahmed John Amy Paul Bishop Charlie Butcher William Byrd John Cadick Corey Cahill Lee Carabeo Angela Card Don Chambers Carl Chowaniec Vincent DelGatto Norbert Do

31、erry Mike Drew Kamal Garg Lukas Graber Torsten Gruhn Bill Hayden Chris Heron Anthony Hoevenaars Akhter Hossain Paul Kelly Yuri Khersonsky Stephen Ly Earl MacDonald Nicole Maillette Tim McCoy John Merando Daryl Moore Dennis Neitzel Mark Nelson Robert Olmstead Sergio Panetta Kevin Peterson Joseph Piff

32、 Mike Roa Gary Savage Thomas Schubert Robert Seitz Gary Skibinski Mischa Steurer James Turso Don Voltz David Wallace Vicki Warren James Waters James WolfeThe following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval

33、, or abstention. David Aho Dwight Alexander Saleman Alibhay John Amy Ettore Bartolucci Frank Basciano Michael Basler Paul Becker Gustavo Brunello William Bush William Byrd Paul Cardinal Matthew Davis Davide De Luca Norbert Doerry Neal Dowling Robert Durham Timothy L. Gauthier Mietek Glinkowski Jalal

34、 Gohari J Travis Griffith Randall Groves Chris Heron Lee Herron Werner Hoelzl Anthony Hoevenaars John Houdek Richard Jackson Ben C Johnson Piotr Karocki John Kay Paul Kelly Yuri Khersonsky Robert Koebke Michael Lauxman George Cristian Lazaroiu Wei-Jen Lee Steven Liggio Earl MacDonald Arturo Maldonad

35、o John Malinowski William McBride Dennis Neitzel Arthur Neubauer T. W. Olsen Lorraine Padden Richard Paes Sergio Panetta Kevin Peterson K. James Phillips Joseph Piff Iulian Profir Ryandi Ryandi Daniel Sabin Gary Savage Bartien Sayogo Thomas Schubert Robert Seitz Nikunj Shah Xu She Jerry Smith Gary S

36、mullin Michael Steurer James Timperley Albert Tucker John Turner Demetrios Tziouvaras James Van De Ligt John Vergis Daniel Ward Kenneth White Jian Yu7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this recommended practice on 23 March 2017, it had the following

37、membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel

38、Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus 8 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 45.1-2017, IEEE Recommended Practice for Electrical

39、Installations on ShipboardDesign. The IEEE Std 45 series comprises nine recommended practices addressing electrical installations on ships and marine platforms. IEEE Std 45.1 provides recommended practice for design recommendations for ac power systems, dc power systems, emergency power systems, sho

40、re power, power quality and harmonics, electric propulsion and maneuvering systems, motors and drives, thrusters, and steering systems installed shipboard and is intended for use with the IEEE Std 45 series of documents. The topics covered in this document should be considered from the beginning of

41、the project and throughout the design and construction processes, and thereby should facilitate the integration of electrical systems at the shipyard level. Adherence to the IEEE 45.1 design process provides an effective set of integration requirements and identifies key issues and recommended solut

42、ions or options. Previous editions of IEEE Std 45 were developed as single documents addressing all areas. On 9 June 2005, PAR 45 for the Revision of IEEE Std 45-2002 was approved and the revision of IEEE Std 45 as a single document began. It soon became apparent that attempting to cover all issues

43、in a single document would produce a document that was very large and, therefore, difficult to ballot due to the wide range of issues needing to be addressed. In September 2008 it was decided that the revision of IEEE Std 45 should be developed as a base document with separate documents addressing s

44、pecific areas. On 10 December 2008 separate Project Authorization Requests (PARs) were approved for seven separate recommended practices. Additional PARs were approved on 11 September 2009 for Switchboards and 9 December 2009 for Cable Systems bringing the total number of standards in the IEEE Std 4

45、5 series to nine, including: IEEE Std 45, IEEE Recommended Practice for Electrical Installations on Shipboard IEEE Std 45.1-2016, IEEE Recommended Practice for Electrical Installations on ShipboardDesign IEEE Std 45.2-2011, IEEE Recommended Practice for Electrical Installations on ShipboardControls

46、and Automation IEEE Std 45.3-2015, IEEE Recommended Practice for Shipboard Electrical InstallationsSystems Engineering IEEE P45.4, Recommended Practice for Electrical Installations on ShipboardMarine Sectors and Mission Systems IEEE Std 45.5-2014, IEEE Recommended Practice for Electrical Installatio

47、ns on ShipboardSafety Considerations IEEE Std 45.6-2016, IEEE Recommended Practice for Electrical Installations on ShipboardElectrical Testing IEEE Std 45.7-2012, IEEE Recommended Practice for Electrical Installations on ShipboardAC Switchboards IEEE Std 45.8-2016, IEEE Recommended Practice for Elec

48、trical Installations on ShipboardCable Systems 9 Copyright 2017 IEEE. All rights reserved. Contents 1. Overview 14 1.1 Introduction . 14 1.2 Scope . 14 1.3 Purpose 15 1.4 Application of various national and international standards 15 1.5 Equipment construction, testing, and certification . 15 2. Nor

49、mative references 15 3. Definitions, acronyms, and abbreviations 19 3.1 Definitions . 19 3.2 Acronyms and abbreviations . 24 4. System engineering 25 4.1 Introduction . 25 4.2 Design baseline 26 4.3 Product design . 27 4.4 Product baseline . 27 5. Power system characteristics 28 5.1 Electrical power systems architectures 28 5.2 Standard systems . 30 5.3 Standard voltage 30 5.4 Standard frequency 31 5.5 Selection of voltage and system type . 31 5.6 AC power system characteristics . 32 5.7 DC power systems characteristics . 34 5.8 Key electric