IEEE 1671.3-2017 - IEEE Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description.pdf

1、 IEEE Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description Sponsored by the IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Standards Coordinating Committee 20 IEEE Std 1671.3-20

2、17 (Revision of IEEE Std 1671.3-2007) IEEE Std 1671.3-2017 (Revision of IEEE Std 1671.3-2007) IEEE Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description Sponsor IEEE Standards Coordinating Committee 20 on Test and Diagnosis of Electronic Systems of the IEEE Standards B

3、oard Approved 6 December 2017 IEEE-SA Standards Board 2 Abstract: An exchange format utilizing Extensible Markup Language (XML) for both the static description of unit under test (UUT) and the specific description of UUT instance information is defined in this standard. Keywords: automatic test equi

4、pment (ATE), Automatic Test Markup Language (ATML), ATML Instance Document, automatic test system (ATS), IEEE 1671.3, unit under test (UUT), XML schema The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrica

5、l and Electronics Engineers, Inc. All rights reserved. Published 13 April 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material.

6、In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce,

7、 test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received fr

8、om users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing an

9、y IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE

10、FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILIT

11、Y, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Translations The IEEE consensus development process involves the

12、 review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board O

13、perations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE

14、standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation

15、with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of con

16、cerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions exc

17、ept in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be subm

18、itted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance

19、 to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents

20、 may not be construed as doing so Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and re

21、gulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. 5 Photocopies Subjec

22、t to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance

23、 Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards d

24、ocuments should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document to

25、gether with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do

26、 not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or

27、 errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be ac

28、cessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by pa

29、tent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is

30、listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that ar

31、e demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for condu

32、cting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expres

33、sly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2018 IEEE. All rights reserved. Participants At the time this I

34、EEE standard was completed, the 1671.3 Working Group had the following membership: Ion A. Neag, Chair Malcom Brown Chris Gorringe Anand Jain Teresa Lopes Mukund Modi Leslie Orlidge Mike Seavey John Stabler Joseph Stanco Ronald Taylor The following members of the individual balloting committee voted

35、on this standard. Balloters may have voted for approval, disapproval, or abstention. W. Larry Adams Jr. Malcom Brown Juan Carreon Chris Gorringe Randall Groves Werner Hoelzl Bernard Homes Noriyuki Ikeuchi Anand Jain Teresa Lopes Mukund Modi Ion A. Neag Leslie Orlidge Mike Seavey Robert Spinner Josep

36、h Stanco Michael Stora Walter Struppler Marcy Stutzman Ronald Taylor Louis Ungar John Vergis Oren Yuen Daidi Zhong When the IEEE-SA Standards Board approved this standard on 6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Cha

37、ir Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet

38、 Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus 7 Copyright 2018 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1671.3-2017, IEEE Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description. This child, or “dot,” standard, also

39、 known as an ATML component standard, provides for the definition of the unit under test XML schemas, and contains references to XML instance document examples, both of which accompany this standard. The XML schemas defined by this standard provide for the identification and definition of a unit und

40、er test (UUT). Where appropriate, the XML schemas utilize and reference components of the ATML for Exchanging Automatic Test Equipment and Test Information via XML Standard (IEEE Std 1671) schema set. ATMLs XML schemas define the basic information required within any test application and provide a v

41、ehicle for formally defining the test environment by defining a class hierarchy corresponding to these basic information entities and provide several methods within each to enable basic operations to be performed on these entities. ATML component standards within the ATML framework define the partic

42、ular requirements within the test environment. 8 Copyright 2018 IEEE. All rights reserved. Contents 1. Overview 9 1.1 Scope . 9 1.2 Application 9 1.3 Conventions used within this document 10 2. Normative references 11 3. Definitions, acronyms, and abbreviations 12 3.1 Definitions . 12 3.2 Acronyms a

43、nd abbreviations . 13 4. UUTDescription schema 14 4.1 Applicability 14 4.2 Describing UUT hierarchy 14 4.3 Using the hc:HardwareItemDescription type in the UUTDescription schema . 14 4.4 Describing UUT digital serial buses 22 5. UUTInstance schema 22 5.1 Applicability 22 5.2 Describing UUT instance

44、hierarchy 23 6. ATML UUT Description XML schema names and locations 23 7. ATML XML schema extensibility . 24 8. Conformance 25 Annex A (normative) XML schemas . 26 A.1 UUTDescription XML schema . 26 A.2 UUTInstance XML schema 79 Annex B (informative) IEEE download website material associated with th

45、is document . 88 Annex C (informative) Describing UUT serial digital buses . 89 C.1 Describing serial buses 90 C.2 Describing serial bus nodes . 92 C.3 Describing serial bus messages . 94 Annex D (informative) User information and examples 99 D.1 Line-replaceable unit UUT . 99 D.2 Circuit card assem

46、bly UUT .100 D.3 UUTInstance 101 D.4 Description of digital serial buses 101 Annex E (informative) Bibliography .102 9 Copyright 2018 IEEE. All rights reserved. IEEE Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description 1. Overview Automatic Test Markup Language (ATML)

47、 is a collection of IEEE standards and associated Extensible Markup Language (XML) schemas that allows automatic test system (ATS) and test information to be exchanged in a common format adhering to the XML specifications. The ATML framework and the ATML family of standards have been developed and a

48、re maintained under the guidance of the IEEE Standards Coordinating Committee 20 (SCC20) to serve as a comprehensive environment for integrating design data, test strategies, test requirements, test procedures, test results management, and test system implementations, while allowing test program, te

49、st asset interoperability, and unit under test (UUT) data to be interchanged between heterogeneous systems. This standard (as well as the XML schemas and XML instance document examples that accompany this standard) is intended to be used in identifying and documenting a UUT. 1.1 Scope This standard defines an exchange format, utilizing Extensible Markup Language (XML), for both the static description of a UUT and the specific description of UUT instance information. 1.2 Application 1.2.1 Of this document This standard provides for the identification of static characteristic