BS ISO IEC 19762-5-2012 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Locating systems《信息技术 自动识别和数据采集 (AIDC) 技术 .pdf

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 5: Locating systems BS ISO/IEC 19762-5:2008National foreword This

2、 British Standard is the UK implementation of ISO/IEC 19762-5:2008. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on request to its secre

3、tary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012. ISBN 978 0 580 56600 4 ICS 35.040 Compliance with a British Standard cann

4、ot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARD BS ISO/IEC 19762-5:2008Reference number ISO/IEC 1976

5、2-5:2008(E) ISO/IEC 2008 INTERNATIONAL STANDARD ISO/IEC 19762-5 First edition 2008-06-15 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 5: Locating systems Technologies de linformation Techniques automatiques didentification et de saisie

6、 de donnes (AIDC) Vocabulaire harmonis Partie 5: Systmes de localisation BS ISO/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typef

7、aces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Sy

8、stems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikel

9、y event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electron

10、ic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org

11、Web www.iso.org ii ISO/IEC 2008 All rights reserved BS ISO/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) ISO/IEC 2008 All rights reserved iii Contents Page Foreword iv Introduction v 1 Scope 1 2 Classification of entries . 1 3 Terms and definitions. . 1 4 Abbreviations 2 Bibliography . . 3 Index. 4 BS ISO

12、/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) iv ISO/IEC 2008 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or

13、 IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, g

14、overnmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance w i t h t h e r u l e s g i v e n i n t h e I

15、S O / I E C D i r e c t i v e s , P a r t 2 . The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires a

16、pproval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 19762-5 was prepared

17、by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. ISO/IEC 19762 consists of the following parts, under the general title Information technology Automatic identification and data capture (AIDC) techniques Harm

18、onized vocabulary: Part 1: General terms relating to AIDC Part 2: Optically readable media (ORM) Part 3: Radio frequency identification (RFID) Part 4: General terms relating to radio communications Part 5: Locating systems BS ISO/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) ISO/IEC 2008 All rights reserv

19、ed v Introduction ISO/IEC 19762 is intended to facilitate international communication in information technology, specifically in the area of automatic identification and data capture (AIDC) techniques. It provides a listing of terms and definitions used across multiple AIDC techniques. Abbreviations

20、 used within each part of ISO/IEC 19762 and an index of all definitions used within each part of ISO/IEC 19762 are found at the end of the relevant part. BS ISO/IEC 19762-5:2008INTERNATIONAL STANDARD ISO/IEC 19762-5:2008(E) ISO/IEC 2008 All rights reserved 1 Information technology Automatic identifi

21、cation and data capture (AIDC) techniques Harmonized vocabulary Part 5: Locating systems 1 Scope This part of ISO/IEC 19762 provides terms and definitions unique to locating systems in the area of automatic identification and data capture techniques. This glossary of terms enables the communication

22、between non- specialist users and specialists in locating systems through a common understanding of basic and advanced concepts. 2 Classification of entries The numbering system employed within ISO/IEC 19762 is in the format nn.nn.nnn, in which the first two numbers ( n n.nn.nnn) represent the “Top

23、Level” reflecting whether the term is related to 01 = common to all AIDC techniques, 02 = common to all optically readable media, 03 = linear bar code symbols, 04= t w o - dimensional symbols, 05 = radio frequency identification, 06 = general terms relating to radio, 07 = real time locating systems,

24、 and 08 = MIIM. The second two numbers (nn. n n.nnn) represent the “Mid Level” reflecting whether the term is related to 01 = basic concepts/data, 02 = technical features, 03 symbology, 04 = hardware, and 05 = applications. The third two or three numbers (nn.nn.n n n) represent the “Fine” reflecting

25、 a sequence of terms. The numbering in this part of ISO/IEC 19762 employs“Top Level” numbers (nn.nn.nnn) of 07. 3 Terms and definitions 07.01.01 real time locating system RTLS combination of hardware and software that is used to continuously determine and provide the real time position of assets and

26、 resources equipped with devices designed to operate w i t h t h e s y s t e m 07.01.02 geolocation latitude and longitude coordinates of a particular location 07.01.03 homing ability to locate/find a specific transponder w i t h o r without a portable interrogator 07.01.04 event blink EB one or mor

27、e redundant emissions from an RTLS transmitter that is caused by an external input such as a switch or serial connection BS ISO/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) 2 ISO/IEC 2008 All rights reserved 07.01.05 exciter blink EXB one or more redundant emissions from an RTLS transmitter that is cause

28、d by entering the electromagnetic field of a deviceintended to trigger a transmission 07.01.06 sub-blink message that is transmitted one or multiple times in a “blink” 07.01.07 tag blink radio frequency transmission(s) from an RTLS transmitter that may consist of one or multiple duplicate messages (

29、sub-blinks) 07.01.08 timed interval blink TIB one or more redundant emissions from an RTLS transmitter that is used for location calculation and is emitted at a regular rate which is pre-programmed into the RTLS transmitter 07.01.09 infrastructure R T L S system components existing between the air i

30、nterface protocol and the RTLS server application programming interface (API) 07.04.01 exciter R T L S device that transmits a signal that alters the behaviour of an RTLS transmitter 07.04.02 reader R T L S device that receives signals from an RTLS transmitter 07.04.03 server R T L S computing devic

31、e that aggregates data from the readers and determines location of transmitters 07.04.04 transmitter R T L S active radio devices that utilize the specified RTLS protocols 4 Abbreviations EB event blink EXB exciter blink RTLS real time locating system TIB timed interval blink BS ISO/IEC 19762-5:2008

32、ISO/IEC 19762-5:2008(E) ISO/IEC 2008 All rights reserved 3 Bibliography 1 ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC 2 ISO/IEC 19762-2, Information technology Automatic identificatio

33、n and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM) 3 ISO/IEC 19762-3, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) 4 ISO/IEC 19762-4, Information t

34、echnology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 4: General terms relating to radio communications BS ISO/IEC 19762-5:2008ISO/IEC 19762-5:2008(E) 4 ISO/IEC 2008 All rights reserved Index event blink (EB) 07.01.04 exciter blink (EXB) 07.01.05 exciter 07

35、.04.01 geolocation 07.01.02 homing 07.01.03 infrastructure 07.01.09 reader 07.04.02 real time locating system 07.01.01 server 07.04.03 sub-blink 07.01.06 tag blink 07.01.07 timed interval blink (TIB) 07.01.08 transmitter 07.04.04 BS ISO/IEC 19762-5:2008This page deliberately left blankThis page deli

36、berately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standar

37、ds and other standardisation products are published by BSI Standards Limited. British Standards Institution (BSI) raising standards worldwide BSI 389 Chiswick High Road London W4 4AL UK Te l + 4 4 ( 0 ) 2 0 8 9 9 6 9 0 0 1 Fax +44 (0)20 8996 7001 Revisions British Standards and PASs are periodicall

38、y updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while usi

39、ng British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. S i m i l a r y f o r P A S s , p l e a s e n o t i f y B S I C u s t o m e r S e r v i c e s . Te l : + 4 4 ( 0 ) 2 0 8 9 9 6 9 0 0 1 F a x : + 4 4 (

40、 0 ) 2 0 8 9 9 6 7 0 0 1 BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs. Te l : + 4 4 ( 0 ) 2 0 8 9 9 6 7 6 6 9 F a x : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 1 Email: Buying

41、 standards Yo u m a y b u y P D F a n d h a rd c o p y v e r s i o n s o f s t a n d a rd s d i re c t l y u s i n g a credit card from the BSI Shop on the website In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services. Te l : + 4

42、4 ( 0 ) 2 0 8 9 9 6 9 0 0 1 F a x : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 1 Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested. Information on standards BSI provides a wide range of

43、 information on national, European and international standards through its Knowledge Centre. Te l : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 4 F a x : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 5 Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchas

44、e price of standards. For details of these and other benefits contact Membership Administration. Te l : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 2 F a x : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 0 1 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at Furt

45、her information about British Standards is available on the BSI website at www.bsi- Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the informatio

46、n used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or b

47、y any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department. Te l : + 4 4 ( 0 ) 2 0 8 9 9 6 7 0 7 0 Email: