AIR FORCE A-A-58041-1995 TRAILER LD-3 CONTAINER SIDE TRANSFER TURNTABLE《激光视盘-容器3中的边转移转台拖车》.pdf

1、A-A-58041 15 MARCH 95 COMMERCIAL ITEM DESCRIPTION TRAILEX, LD-3 CONTAINER, SIDE TRANSFER, TURNTABLE The General Services Administration has authorized the use of this commercial item description. 1. SCOPE: container capability. This trailer shall have side transfer capability, a fully rotatable deck

2、, four-wheel coordinated steering, and a capacity of 3500 pounds. This Commercial Item Description (CID) describes a commercial LD-3 container trailer having single 2 SALENT CHARACERISTICS: Failure of the trailer to meet the following salient characterisiics will require rejection of the offer. 21 T

3、he trailer shall be free from faulty construction or any defect which affeas appearance, serviceability, or durability. Ai components and accessories shall be represented in the manufacturers sale data as standard or optionai. The trailer shall be representative of the quality and workmanship found

4、in trailers offered for new commercial sale. 2.2 The following is the purchaser provided data: 22.1 The deck shaii handle one fully loaded LD-3 cargo container (gross weight 3500 pounds). 22.2 The deck sha be of the side loading type, accepting containers hrn either side, with sufficient width to ac

5、commodate container misalignment. 22.3 “be deck shall be furnished with suiable stops, guides, and vertical restraints. The container stops and vertical restraints shall be designed to retract into the deck and then automatidy return to position once the container is positioned onto the roiler deck.

6、 2.2.4 A walkway wiih a nonskid surface shall be provided across the deck to ailow personnel a distribution is unlimited Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-58041 I 9999974 0367488 994 I 2.2.6 Each roiler sha have a minimum diameter

7、of 2.5 inches and a minimum capacity of 400 pounds. 2.2.7 The distance between the centerlines of the rollers shall be 10 inches maximum. 2.2.8 The lateral roiier spacing shail be 20 inches maximum to accommodate the wakway between the rollers. 2.2.9 The deck shall be manuaUy rotatable 360 degrees.

8、Deck rotation stops shall be provided every 180 degrees to facilitate correct positioning for loading/offloading from either side. 2.2.10 The running gear shall be completely within the confines of the trailer frame. AU steering linkages, brake system components, or other mechanisms located beneath

9、the trailer, shall be protected from damage, The running gear shall be capable of 15 mph operation when part of a trailer aain or when towedsingly. 22.1 1 The steering shall be of the four-wheel-coordinated type, using the towbar to control the direction of wheel turn. 2.2.12 The towbar shall be of

10、sufficient length to prevent the corners of each trailer in a trailer train from contacting during the minimum tuming radius. The towbar shall be fitted with a MS51336 lunette eye or similar lunette which is compatible with an MS5 1335 pintie hook. 2.2.13 The Wer shall have a towbar-actuated parking

11、 brakes on two front wheeis. The parking brakes shaii be of the internai expanding type drum brakes. 2.2.14 The Wer sha be equipped with wheels and tires which meet ail Tire and Rim Association or European Tyre and Rim Technical Organization requirements for this application. The trailer shaU be equ

12、ipped with pneumatic, tubeless tires mounted on demountable rims. 2.215 A MS5 1335 pintie hook or similar pintie hook &ali be mounted on the rear of the trailer in order to connect the towbar of the foliowing trailer when operating in a train. 2.2.16 The trailer shall be painted Forest Green, Color

13、Number 24052 of FED-STD-595 or the contractors closest commercia equivalent. The paint shaii be a polyurethane paint. Ail outer surfaces shall be painted and aU exterior items (such as wheels, wheel covers, and bumpers) sha be painted 3. REGULATORYREO: 3.1 The offeror/conmctor is encouraged to use r

14、ecovered materiais in accordance with Public Law 94- 580 to the maximum extent possible. 3.1.1 For the purpose of this requirement, recovered materiais are those materiais which have been collected from soiid waste and reprocessed to become a source of raw materiais, as distinguished from virgin raw

15、 materiais. The components, pieces and parts incorporated in the traiier(s) may be newly fabricated hm recovered materials to the maximum extent practicable, provided the traiier(s) produced meets ali other requirements of this 0. Used rebuilt, or remanufactured components, pieces and parts, shaii n

16、ot be incorporated 4. OUALITY ASSURANCE PROVISIONS: 4.1 Contractor Certification: The contractor shali certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item descxiption, and that the product conforms to the producers own Provi

17、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-58041 7977974 O1b7487 820 drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to the deiivery and thereafte

18、r as may be otherwise provided for under the provisions of the contract. 4.2. Market Acceptability: 4.2.1 Commercial. The trailer furnished must be the latest model as of the date of award (with minor modifications, as that tem is dened in DOD Federal Acquisition Regulation (FAR) Supplement 252.21 1

19、-7022, para K-85 of the Solicitation) of an estabished product previously produced and sold in substantial quantities (exceeding the criteria at FAR 15.804-3 (0 (2) (ii) (A) for at least two years immediately preceding the issuance date of the solicitation. The Wer furnished, or earlier models of it

20、, absent minor modifications, shdi have routinely been supported with spcues/repair parts which were produced or sold in the normal course of business. At the time of delivery, the contractor shall furnish the Administrative Contracting Officer (ACO) with verification of compliance with these requir

21、ements. Offerors shaii provide, as a part of their proposais, the foliowing iafomation on the ttailer (or its eariier models) being offeRd as a commercial item: (a) Total sales to the U.S. Government or to contractors for U.S. Government use during the two (2) (b) Total sales of the item to the gene

22、ral public during the two (2) years immediately preceding the (c) Length of time he item has been soid in the commercial market place. (d) Points of contact and phone numbers of customers to which the item has been sold in the (e) Other pertinent information necessary to determine that the item is a

23、n established commercial years immediately preceding the issuance date of the solicitation. issuance date of the solicitation. commercial market place. item. 5. PACKAGING. PACKING. AND MARKING: An identification piate, permanently marked, shaii be secureiy mounted on the trailer body. The identifica

24、tion plate shaU contain the following information: NOMENCLATRE MANUFACXURERS MODEL NUMBER MANFACRERSSERIALNUMBER MANUFACRERSNAME MANWACRERS ADDRFSS MANUFACKJRERS SERVICE PHONE NUMBER DATE OF MANUFACTURE c0NTRACl“UMBER NATIONAL STOCK NUMBER CUSTODM AIR FORCE - 99 PREPARING ACTIVITY: AIRFORCE-84 Project Number, 3920-0001 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-