ANSI ASABE S608-2008 Headlamps for Agricultural Equipment《农业设备用头上戴的小型照明灯》.pdf

1、 ANSI/ASABE S608 AUG2008 (R2013) Headlamps for Agricultural Equipment American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological s

2、ystems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural field equipment, farmstead equipment, structures, soil and water resource man

3、agement, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industr

4、y or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protect

5、ing themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are designated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering Practices and

6、Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other

7、criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily

8、unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to rea

9、ffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org ANSI/ASABE S608 AUG2008 (R2013) Copyright American Society of

10、Agricultural and Biological Engineers 1 ANSI/ASABE S608 AUG2008 (R2013) Reaffirmed November 2013 as an American National Standard Headlamps for Agricultural Equipment This standard was developed by the ASABE Lighting and Marking Subcommittee and approved by the Power and Machinery Tractor Committee.

11、 The adoption of this standard was made possible by the signing of 2004 SAE-ASABE copyright agreements, which gave ASABE a royalty-free license to publish in whole or in part SAE standard document J975, Headlamps for Agricultural Equipment. Adopted by ASABE and approved as an American National Stand

12、ard August 2008; reaffirmed by ASABE October 2013; reaffirmed by ANSI November 2013. Keywords: Agricultural equipment, Headlamps, Lighting, Safety 1 Scope This Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment th

13、at may be operated on public roads. 2 References 2.1 Applicable Publications. The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply. 2.1.1 SAE PUBLICATIONS: Available from SAE, 400 Commonwealth Drive, Warrendale,

14、 PA 15096-0001. SAE J573 Miniature Lamp Bulbs SAE J578 Color Specification SAE J2139 Test for Signal and Marking Devices Used on Vehicles of 2032 mm or More in Overall Width 3 Definitions A headlamp for agricultural equipment is a lighting device used to provide general illumination ahead of the veh

15、icle. 4 General Requirements The following sections from SAE J2139 are part of this document: Section 3.7 Samples Section 3.8 Sealed Lighting Devices Section 4.1 Vibration Test Section 4.2 Moisture Test ANSI/ASABE S608 AUG2008 (R2013) Copyright American Society of Agricultural and Biological Enginee

16、rs 2 Section 4.3 Dust Test Section 4.4 Photometry Test The photometric test shall be made with the photometer at a distance of at least 18.3 m (60 ft) from the lamp. Color Tests: The color of the light from the lighting device shall be white 5 Beam Aim for Photometry 5.1 General Service Head Lamp: T

17、he unit shall be aimed on the photometer so that the top of the beam, or lower beam if so equipped, is at least 1 degree, but not more than 4 degrees below lamp center level and centered laterally. 6 Beam Aim on the Vehicle 6.1 Each lamp shall be aimed visually such that when measured on a screen or

18、 vertical surface at 7.6 m (25 ft.) from the lamp, the top of the beam, or lower beam if so equipped, is 0.1 H below the lamp center, where H is the lamp center measure from the ground. The head lamp beam shall be centered laterally. 7 Photometric Requirements 7.1 General Service Head Lamp: The unit

19、 shall comply with the photometric requirements of Table 1 or 2. 7.1.1 Low beam per Table 1. Table 1 Lower Beam or Single Beam MIN CP MAX CP 1/2U and above 60L to 60R 2000 1.5D V 4000 1.5D 6L to 6R 2000 3D 6L to 6R 1500 3D 10L to 10R 1000 5D to 15L to 15R 500 8D 15L to 15R 250 A tolerance of 0.25 degrees in location may be allowed for any test point 7.1.2 High beam per Table 2. Table 2 Upper Beam MIN CP MAX CP 1U 3L to 3R 5000 H V 8000 1D 6L to 6R 1000 2D 10L to 10R 750 4D 15L to 15R 10,000 A tolerance of 0.25 degrees in location may be allowed for any test point