ANSI AWWA B502-2017 Sodium Polyphosphate Glassy (Sodium Hexametaphosphate).pdf

1、AWWA Standard SM Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) Effective date: Sept. 1, 2017. First edition approved by AWWA Board of Directors June 1, 1967. This edition approved June 11, 2017. Approved by American National Standards Institute June 16, 2017. ANSI/AWWA B502-17 (Revision of

2、 ANSI/AWWA B502-11) Copyright 2017 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and admin

3、istrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not cons

4、titute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA st

5、andards are intended to represent a consensus of the water industry that the product described will provide satisfactory ser- vice. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal American Water Wor

6、ks Association. The action becomes effective on the first day of the month following the month of Journal American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope

7、and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has approved the standard or not, from manufacturing, market

8、ing, purchasing, or using products, processes, or proce - dures not conforming to the standard. American National Standards are subject to periodic review, and users are cau- tioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encouraged

9、 to state on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this stan

10、dard indicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American N

11、ational Standards may receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900; or emailing infoansi.org. hours of work by your fellow water professionals. Revenue from the sales

12、of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of ISBN-13, print: 978-1-62576-256-6 eISBN-13, electronic: 978-1

13、-61300-443-2 DOI:http:/dx.doi.org/10.12999/AWWA.B502.17 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpt

14、s or quotations for review purposes, without the written permission of the publisher. Copyright 2017 by American Water Works Association Printed in USAiii Committee Personnel The AWWA Standards Committee on Scale and Corrosion-Control Chemicals, which reviewed and approved this standard, had the fol

15、lowing personnel at the time of approval: Robert A. Ryder, Chair General Interest Members E. Leung,* California State Water Board, Richmond, Calif. (AWWA) M.S. McFadden, HDR Engineering Inc., Denver, Colo. (AWWA) N.E. McTigue, EE write to the department at 6666 West Quincy Avenue, Denver, CO 80235-3

16、098; or email at standardsawwa.org. Copyright 2017 American Water Works Association. All Rights Reserved. This page intentionally blank.1 AWWA Standard ANSI/AWWA B502-17 (Revision of ANSI/AWWA B502-11) Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) SECTION 1: GENERAL Sec. 1.1 Scope This sta

17、ndard describes sodium polyphosphate, glassy, for use in the treatment of potable water, wastewater, and reclaimed water. This material is also known as sodium hexametaphosphate, sodium tetrapolyphosphate, and Grahams salt. Sec. 1.2 Purpose The purpose of this standard is to provide the minimum requ

18、irements for sodium polyphosphate, glassy, including physical, chemical, sampling, packaging, shipping, and testing requirements. Sec. 1.3 Application This standard can be referenced in documents for purchasing and receiving sodium polyphosphate, glassy, and can be used as a guide for testing the ph

19、ysical and chemical properties of sodium polyphosphate, glassy, samples. The stipula- tions of this standard apply when this document has been referenced and only to sodium polyphosphate, glassy, used in the treatment of potable water, wastewater, and reclaimed water. Copyright 2017 American Water W

20、orks Association. All Rights Reserved. 2 AWWA B502-17 SECTION 2: REFERENCES This standard references the following documents. In their latest editions, they form a part of this standard to the extent specified within the standard. In any case of conflict, the requirements of this standard shall prev

21、ail. APHA,* AWWA, WEF Standard Methods for the Examination of Water and Wastewater. ASTM E11Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves. NSF /ANSI 60Drinking Water Treatment ChemicalsHealth Effects. SECTION 3: DEFINITIONS The following definitions shall apply in this stand

22、ard: 1. Day: A day is defined as a 24-hour period. 2. Manufacturer: The party that manufactures, fabricates, or produces materials or products. 3. Potable water: Water that is safe and satisfactory for drinking and cooking. 4. Purchaser: The person, company, or organization that purchases any materi

23、als or work to be performed. 5. Reclaimed water: Wastewater that becomes suitable for beneficial use as a result of treatment. 6. Sodium polyphosphate, glassy: A glassy solid that is a soluble sodium phos- phate containing Na 2 O and P 2 O 5in a molar ratio of approximately 1.1 Na 2 O to 1.0 P 2 O 5

24、 . It is an amorphous mixture of long-chain polyphosphates with the for- mula Na n+2 P n O n+1 . The approximate value of n is either 1216 or 1821. 7. Supplier: The party that supplies material or services. A supplier may or may not be the manufacturer. 8. Tamper-evident packaging: Packaging having

25、one or more indicators or barriers to entry that if breached or missing, can reasonably be expected to provide visible evidence to the purchaser that tampering has occurred. The tamper-evident * American Public Health Association, 800 I Street, NW, Washington, DC 20001. Water Environment Federation,

26、 601 Wythe Street, Alexandria, VA 22314. ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Copyright 2017 American Water Works Association. All Rights Reserved.