ANSI CSA AM CSA HGV 4.8-2012 Hydrogen gas vehicle fueling station compressor guidelines (First Edition).pdf

1、ANSI/CSA HGV 4.8-2012Hydrogen gas vehicle fueling station compressor guidelinesLegal Notice for StandardsCanadian Standards Association and CSA Ame rica, Inc. (operating as “CSA Group”) develop standards through a consensusstandards development process approved by the Standards Council of Canada and

2、 American National Standards Institute. Thisprocess brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard.Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does notindependentl

3、y test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness

4、 for a particular purpose or use, its merchantability, orits non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, orcurrency of any of the information published in this document. CSA Group makes no representations or warranties reg

5、arding thisdocuments compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIREC T, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, O

6、REXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED INCONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR R

7、ESULTING FROMACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCHDAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or onbehalf

8、 of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information inthis document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Groupaccepts no responsibility whatsoever arising in any

9、 way from any and all use of or reliance on the information contained in thisdocument. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power,nor does it undertake, to enforce compliance with the contents of the standards or oth

10、er documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or theauthorized licensee, of all works contained herein that are protected by copyright, all trade-marks (e

11、xcept as otherwise noted to thecontrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and tradesecrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, ordisclosure

12、of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to aright in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted bylicence or by law, CSA Group reserves all intellect

13、ual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shallnot be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised t

14、hat determination ofthe validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document isauthorized to do only the following:If this document

15、is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group t

16、o havesuch copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic cop

17、y of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes yo

18、ur acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceANSI/CSA HGV 4.8-2012December 2012Title:Hydrogen gas vehicle fueling station compressor guidelinesPagination:44 pages (vi preliminary and 38 text), each dated December 2012To register for e-mail notification about

19、 any updates to this publicationgo to shop.csa.caclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2422458.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csag

20、roup.org/legal to find out how we protect your personal information.Published in December 2012 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caANSI/CSA HGV 4.8-20

21、12Hydrogen gas vehicle fuelingstation compressor guidelinesTMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ISBN 978-1-77139-204-4 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the

22、publisher.To purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. CSA Group 2012Permission is granted to republish material herein in laws or ordinances, and in regulations, administrative orders, or similar documents is

23、sued by public authorities. Those desiring permission for other republication should consult CSA Group, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.Permission is granted to republish material herein in laws or ordinances, and in regulations, administrativeorders, or similar do

24、cuments issued by public authorities. Those desiring permission for other republicationshould consult CSA Group, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131.First Edition 2012The standards set forth herein apply to the first edition of the Standard for Hydrogen gas vehicle fueling station

25、compressor guidelines, HGV 4.8. Following their preparation by the supervising Technical Committee, they were accepted by the American National Standards Institute (ANSI).American National Standards Institute, Inc.Standard DeveloperCSA AMERICA INC.,Operating as “CSA Group”8501 East Pleasant Valley R

26、oadCleveland, Ohio 44131American National Standards InstituteResponsibility of approving American National Standards rests with theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth FloorNew York, NY10036The American National Standards Institute (ANSI), Inc. is the nationally rec

27、ognized coordinator of voluntary standards development in the United States through which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organized labor and consumer interests, establish and improve the some 10,000 national consensus

28、 standards currently approved as American National Standards.ANSI provides that the interests of the public may have appropriate participation and representation in standardization activity, and cooperates with departments and agencies of U.S. Federal, state and local governments in achieving compat

29、ibility between government codes and standards and the voluntary standards of industry and commerce.ANSI represents the interests of the United States in international nontreaty organizations such as the International Organization for Standardization (ISO) and the International Electrotechnical Comm

30、ission (IEC). The Institute maintains close ties with regional organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordinates the activities involved in the U.S. participation in these groups.ANSI approval of standards i

31、s intended to verify that the principles of openness and due process have been followed in the approval procedure and that a consensus of those directly and materially affected by the standards has been achieved. ANSI coordination is intended to assist the voluntary system to ensure that national st

32、andards needs are identified and met with a set of standards that are without conflict or unnecessary duplication in their requirements.PrefaceThis publication represents a standard for safe operation, substantial and durable construction and performance testing of the mechanical features of newly m

33、anufactured compressors for use in gaseous hydrogen vehicle fueling stations.This standard is based on engineering principles, research and the combined expertise of manufacturers, users, and others having specialized experience.Nothing in this standard is to be considered in any way as indicating a

34、 measure of quality beyond compliance with the provisions it contains. It is designed to allow compliance of products which may exceed that specified in the provisions herein. In its preparation, full recognition has been given to possibilities of improvement through ingenuity of design. This standa

35、rd is subject to revision as further experience and investigation may show it is necessary and desirable.CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. CSA shall not incur any obligation or liability for damages, including consequential damag

36、es, arising out of or in connection with the use, interpretation of or reliance upon this standard.Users of this American National Standard are advised that the devices/products/activities within its scope may be subject to regulation at the federal, state, or local levels. Users are strongly urged

37、to investigate this possibility through appropriate channels. In the event of a conflict with this standard, the federal, state, or local regulations should be followed.CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National St

38、andards Institute, Inc., require that action be taken to reaffirm, revise or withdraw this standard no later than five (5) years from the date of approval. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards

39、 Institute, Inc., 25 West 43rd Street, Fourth Floor, New York, N.Y. 10036, (212) 642-4900.EFFECTIVE DATE: An organization using this standard for product evaluation as a part of its certification program will normally establish the date by which all products certified by that organization should com

40、ply with this standard.History Of Development Of ANSI HGV 4.8(This History is informative and is not part of the standard.)NOTE: This is the first edition of ANSI/CSA HGV 4.8.In September 2002, CSA met with the U.S. Department of Energy, Renewable Fuels Group in Washington, D.C. to discuss standards

41、 development opportunities in the hydrogen technology area. During this meeting, DOE requested that CSA provide a proposal relating to the development of hydrogen technology standards and codes in the United States. Industry recognized that an important consideration in the successful commercializat

42、ion of hydrogen gas as a vehicle fuel was the issue of codes and standards, pertaining to both fueling stations and vehicle fuel system components. CSA undertook the goal of establishing a program for the development of an organized family of coordinated standards that addresses hydrogen gas vehicle

43、s and fueling stations.Industry and CSA recognized there was no standard that addressed safety requirements for hydrogen gas vehicle fueling station compressors. The development of such a standard was necessary based on industry needs and feedback: (1) There were no standards available for hydrogen

44、applications at the 700 bar pressure levels. (2) Automotive OEMs driving the application of hydrogen as a fuel for vehicles expressed concern over solutions in demonstration projects in the field. The focus of the hydrogen gas vehicle fueling station compressor standard established performance and s

45、afety based requirements for the material, design, manufacture and testing of hydrogen gas vehicle fueling station compressors.CSA has positioned itself as a leader in the fuel cell, hydrogen and natural gas sectors as a Standards Developing Organization (SDO). CSA is aggressively updating and devel

46、oping national standards, and is playing a major role in the promulgation of US technologies nationally. As US TAG Administrator to IEC TC 105 for Fuel Cell Technologies and as US TAG members of ISO TC 197 and ISO TC 22 / SC 25, CSA is facilitating US technology internationally. CSA organized commit

47、tees to address technical issues in the development of standards which would affect future expansion of the hydrogen industry.The HGV 4.8 Hydrogen gas vehicle fueling station compressor standard was processed as an American National Standard in accordance with procedures of the American National Sta

48、ndards Institute (ANSI).This is the first edition of the HGV 4.8 hydrogen gas vehicle fueling station compressor guideline standard, and was approved by the American National Standards Institute, Inc. on November 29, 2012.1ContentsDecember 2012Hydrogen gas vehicle fueling 2012 CSA Group station comp

49、ressor guidelinesJoint Automotive Technical Committee 4NGV/HGV 4.8 Technical Advisory Committee 51 Scope 61.1 61.2 Applications 61.3 Representation 71.4 Compressor package performance curves 71.5 Package arrangement 71.6 Drawings 71.7 Sound pressure level 71.8 Electrical location classification 71.9 Package installation 71.10 Torsional soundness 81.11 Labeling 82 List of reference standards 83 Definitions 94 Compressor package 164.1 General 164.2 Maximum allowable speeds 164.3 Maximum allowable discharge temperature 164.4 Rod loadings 174.5 Compressor cylinders 174.6 Valv