ANSI CSA AM Z21.69-2015 CSA 6.16-2015 Connectors For Moveable Gas Appliances (Fourth Edition).pdf

1、ANSI Z21.69-2015 CSA 6.16-2015Connectors for moveable gas appliancesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards thro ugh a consensus standardsdevelopment pro cess approved by the Standards Council of Canada and the Ameri

2、can National Standards Institut e. This process bringstogether volunteer s representing varied viewpoints and interes ts to achieve consensus and develop a standard. Although CSA Groupadminist ers the process and est ablishes rules to pro mote fairness in achieving consensus, it does not independent

3、ly tes t, evaluat e, or verify thecontent of standards.Disclaimer and exclusion of liabilityThis document is pro vided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this document s fit

4、ness for a particular purpose or use, its merchantability , or its non-infringementof any third party s intellectual pro perty rights. CSA Group does not warrant the accuracy , complet eness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warra

5、nties regarding this document s compliance with any applicablestatut e, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS,

6、 COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OU

7、T OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render pro fessional or other services for

8、or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity . The information in this document is directedto those who have the appropriat e degree of experience to use and apply its conten ts, and CSA Group accepts no responsibility whatsoever

9、arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not -for -profit company that publishes voluntary standards and related documents. CSA Group has no power , nor does itundertake, to enforce compliance with the contents of the

10、 standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in print ed or electronic form), CSA Group is the owner , or the authorizedlicensee, of all works contained herein that are pro tect ed by copyright

11、, all trade-marks (except as otherwise not ed to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are prot ected bypatents and applications for patents. Without limitation, the unauthorized use, modification,

12、copying, or disclosure of this document mayviolate laws that pro tect CSA Groups and/or other s int ellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitt ed by licence or by law , CSA

13、Group reserves all int ellectualproperty rights in this document.Patent rightsAtt ention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this st

14、andard are expressly advised that determ ination of the validity ofany such patent rights is entirely their own responsibility .Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only . The user of this document is authorized to doonl

15、y the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and bro wse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distribut ed only to persons

16、 who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appear s on each such copy .In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from

17、CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destr oy them immediatel

18、y . Use of this documentconstitut es your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceANSI Z21.69-2015 CSA 6.16-2015October 2015Title: Connectors for moveable gas appliancesTo register for e-mail notification about any updates to this publication go to shop.cs

19、a.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423786.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpers

20、onal information.CSA GroupAmerican National StandardsInstituteThe Canadian Standards Association (operating as“CSA Group”), under whose auspices this NationalStandard has been produced, was chartered in 1919and accredited by the Standards Council of Canada tothe National Standards system in 1973. It

21、 is a not-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA Group standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental

22、 agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada in

23、dicate their support for CSA Groupsstandards development by volunteering their time andskills to Committee work and supporting CSA Groupsobjectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000sustaining memberships together form CSA Groupstotal membership from

24、which its Directors are chosen.Sustaining memberships represent a major source ofincome for CSA Groups standards developmentactivities.CSA Group offers certification and testing services insupport of and as an extension to its standardsdevelopment activities. To ensure the integrity of itscertificat

25、ion process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complexin Toronto, CSA Group has regional branch offices inmajor centres across Canada and inspection andtesting agencies in eight countries. Since 1

26、919, CSAGroup has developed the necessary expertise to meetits corporate mission: CSA Group is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and relate

27、d services to meetnational and international needs.The American National Standards Institute (ANSI), Inc.is the nationally recognized coordinator of voluntarystandards development in the United States throughwhich voluntary organizations, representing virtuallyevery technical discipline and every fa

28、cet of trade andcommerce, organized labor and consumer interests,establish and improve the some 10,000 nationalconsensus standards currently approved as AmericanNational Standards.ANSI provides that the interests of the public mayhave appropriate participation and representation instandardization ac

29、tivity, and cooperates withdepartments and agencies of U.S. Federal, state andlocal governments in achieving compatibility betweengovernment codes and standards and the voluntarystandards of industry and commerce.ANSI represents the interests of the United States ininternational nontreaty organizati

30、ons such as theInternational Organization for Standardization (ISO)and the International Electrotechnical Commission(IEC). The Institute maintains close ties with regionalorganizations such as the Pacific Area StandardsCongress (PASC) and the Pan American StandardsCommission (COPANT). As such, ANSI

31、coordinates theactivities involved in the U.S. participation in thesegroups.ANSI approval of standards is intended to verify thatthe principles of openness and due process have beenfollowed in the approval procedure and that aconsensus of those directly and materially affected bythe standards has be

32、en achieved. ANSI coordination isintended to assist the voluntary system to ensure thatnational standards needs are identified and met with aset of standards that are without conflict orunnecessary duplication in their requirements.For further information on CSA Group services, writetoCSA Group178 R

33、exdale Boulevard,Toronto, Ontario,Canada M9W 1R3Responsibility of approving American standards restswith theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth floorNew York, NY 10036ISBN 978-1-77139-985-2 2015 CSA GroupAll rights reserved. No part of this publication may be repro

34、duced in any form whatsoeverwithout the prior permission of the publisher.Published in October 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor ca

35、ll toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Interprovincial Gas Advisory CouncilApproved on September 10, 2015 by ANSIApproved on August 10, 2015 by IGACEffec

36、tive in Canada January 2016Connectors for moveable gasappliancesANSI Z21.69-2015 CSA 6.16-2015ANSI Z21.69-2015 CSA 6.16-2015Connectors for moveable gas appliancesOctober 2015 2015 CSA Group 1ContentsInterprovincial Gas Advisory Council 2Canadian Technical Committee on Gas Appliances and Related Acce

37、ssories 4Z21/83 Technical Committee on Performance and Installation of Gas Burning Appliances and RelatedAccessories 6Z21/CSA Joint Technical Subcommittee on Standards for Connectors for Gas Appliances 9Preface 111 Scope 142 Reference publications 153 Definitions 164 Construction 184.1 Test samples

38、184.2 Quick disconnect devices 184.3 General construction 184.4 Materials 194.5 Fittings 204.6 Instructions 214.7 Marking 235 Performance 235.1 General 235.2 Leakage 245.3 Hydrostatic strength 245.4 Crush strength 255.5 Installation strength 255.6 Tension and flexure strength 265.7 Torsion strength

39、275.8 Reconnection of fittings 285.9 Durability at high temperature 295.10 Capacity 305.11 Resistance to ammonia atmosphere 316 Manufacturing and production tests 32Annex A (normative) Items unique to Canada 33Annex B (informative) Table of conversion factors 34ANSI Z21.69-2015 CSA 6.16-2015Connecto

40、rs for moveable gas appliancesOctober 2015 2015 CSA Group 2Interprovincial Gas Advisory CouncilJ. Renaud Rgie du btiment du Qubec,Montral, Qubec, CanadaCategory: Regulatory AuthorityChairJ.R. Marshall Technical Standards suggestions for its improvement will be referred tothe appropriate committee. T

41、o submit a proposal for change, please send the following information toinquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number)b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.6) To

42、submit a request for interpretation of this Standard, please send the following information toinquiriescsagroup.org and include “Request for interpretation” in the subject line:a) define the problem, making reference to the specific clause, and, where appropriate, include anillustrative sketch;b) pr

43、ovide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstanda

44、rdization and are available on the Current Standards Activities page at standardsactivities.csa.ca.ANSI Z21.69-2015 CSA 6.16-2015Connectors for moveable gas appliancesOctober 2015 2015 CSA Group 12History of the development of the standard for connectors for moveablegas appliancesNote: This History

45、is informative and is not part of the standard.With the onset of the Free Trade Agreement between the United States and Canada on January 2, 1988,significant attention was given to the harmonization of the United States and Canadian safety standardsaddressing gas-fired equipment for residential, com

46、mercial, and industrial applications. It was believedthat the elimination of the differences between the standards would remove potential trade barriersand provide an atmosphere in which North American manufacturers could market more freely in theUnited States and Canada. The harmonization of these

47、standards was also seen as a step towardharmonization with international standards.A draft harmonized standard for connectors for moveable gas appliances was prepared for review bythe Z21/CGA Joint Connector Subcommittee. The draft harmonized standard for connectors formoveable gas appliances is bas

48、ed on the American National Standard for Connectors for MoveableAppliances (Z21.69-1992 and Z21.69a-1993) and the National Standard of Canada for MoveableAppliance Connectors (CAN/CGA-6.16-M87).At its September 20, 1994 meeting, the Z21/CGA Joint Connector Subcommittee considered andmodified the pro

49、posed harmonized draft standard and agreed to distribute it for industry review duringApril 1995.With the formation of joint subcommittees, a Canadian Gas Association Standards Steering Committeeon Gas Burning Appliances and Related Accessories was established to parallel Accredited StandardsCommittees Z21 and Z83, and to support the formation of joint subcommittees. Operating procedures,in accordance with American National Standards Institute procedures, for joint subcommittees weredeveloped and subsequently approved by ANSI on April 1, 1993.