ANSI TIA-455-57-B-1994 FOTP-57 Preparation and Examination of Optical Fiber Endface for Testing Purposes《试验用光学纤维端面的制备和检验》.pdf

1、 TIA-455-57-B (Revision of TIA-455-57-A) May 1994FOTP-57 Preparation and Examination of Optical Fiber Endface for Testing Purposes ANSI/TIA-455-57-B-1994 APPROVED: MAY 12, 1994 REAFFIRMED: SEPTEMBER 14, 2000 REAFFRIMED: MAY 10, 2005 REAFFIRMED: AUGUST 2, 2013 NOTICE TIA Engineering Standards and Pub

2、lications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particul

3、ar need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntar

4、y use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation

5、whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to

6、 determine the applicability of regulatory limitations before its use. (From Project No. 3-3036-RF3, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.12 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technolo

7、gy (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may i

8、nvolve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a

9、 statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or c

10、onditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as re

11、spects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwi

12、se), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative

13、Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute ide

14、ntification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the

15、 contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS

16、 INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PR

17、ODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INC

18、IDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOI

19、NG NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-455-57-BiFOTP-57Preparation and examination of optical fiber endface for testing purposesContentsForeword iii1 Introduction .12 Normative

20、references13 Apparatus24 Sampling and specimens45 Procedure .46 Calculations or interpretation of results.67 Documentation68 Specification information.79 Figures, tables charts, etc. 8Annex A (normative) Laser reflection fiber end inspection technique11Annex B (informative) Comparison between this F

21、OTP and IEC or ITU/TSrequirements.13References.14TIA-455-57-BiiThis page left blank.TIA-455-57-BiiiFOTP-57Preparation and examination of optical fiber endface for testing purposesForeword(This Foreword is informative only and is not part of this Standard.)From TIA Project No. 3036, formulated under

22、the cognizance of TIA FO-6.6,Subcommittee on Fibers and Materials.This FOTP is part of the series of test procedures included within RecommendedStandard EIA/TIA-455.There are 2 annexes, 1 of them normative and 1 informative.Key words: optical fiber, endface preparation, testing, cleavingTIA-455-57-B

23、ivThis page left blankTIA-455-57-B11 Introduction1.1 IntentThis procedure provides guidelines for acceptable optical fiber endfaceappearance and defines the techniques that are commonly employed to obtainsuch appearance. This procedure is intended to promote uniformity in fiber endpreparation qualit

24、y for testing purposes only and does not address issuesassociated with endface preparation and examination for the purposes ofpermanent termination (i.e., connectorization and splicing). This FOTP is notintended to require examination of every fiber end, nor is it intended to establishfirm requireme

25、nts, and is made available only to provide guidelines for variouslevels of end quality that may be called out in other FOTPs. Lastly, the intent ofthis method shall not be confused with the intent of FOTP-179, which isconcerned primarily with the comparison of relative results.1.2 HazardsThe procedu

26、re may involve the use of certain hazardous materials, operationsand equipment. It is the responsibility of whoever uses this procedure toestablish appropriate safety practices and to determine the applicability ofregulatory limitations prior to use. Note, in particular, that some fluids used maybe

27、flammable or may constitute health hazards, or both. Use proper precautionsduring handling and during the balance of the procedure. Constant, prolonged orexcess exposure to solvents such as Freon, 1-1-1 trichloroethane, methylenechloride and methyl isobutyl ketone may act as a carcinogen or damage i

28、nternalorgans. Use solvents in a well-ventilated area and avoid skin contact as astandard precaution. Consult safety data sheets for these materials.2 Normative referencesTest or inspection requirements may include, but are not limited to, the followingreferences:EIA/TIA-455-A, Standard Test Procedu

29、re for Fiber Optic Fibers, Cables,Transducers, Sensors, Connecting and Transmitting Devices, and Other FiberOptic ComponentsFOTP-13 (RS-455-13), Visual and Mechanical Inspection of Fibers, Cables,Connectors, and/or Fiber Optic DevicesTIA-455-57-B2FOTP-179 (EIA-455-179), Inspection of Cleaved Fiber E

30、nd Faces byInterferometryNQ-EIA-5460000, Generic Specification for a Field Portable Optical InspectionDevice3 ApparatusA wide variety of end preparation equipment is available, designed to give flatendfaces, perpendicular to the fiber axis. Any of this equipment is acceptable,provided the end angle

31、and facial condition of the prepared fiber are of sufficientquality to ensure the necessary accuracy and precision required for the particularquality control measurement to be made. When special equipment is required, itshall be specified in the affected FOTP. The following guidelines may be usefuli

32、n deciding upon equipment to be used:3.1 Cleaving, cutting and slicing devicesCleaving, cutting and slicing devices are usually of the scribe-and-break variety,but are not necessarily restricted to this category. Tension on the fiber is usuallyapplied, either by tensile load or a bend, some time dur

33、ing or after the impositionof the scribing operation3.2 Mechanical stripperA mechanical stripping device may be employed to remove fiber coating if thechemical cleaning fluids (refer to 3.4) are not used. Note, however, that somefiber manufacturers have fiber coatings that are not removable by mecha

34、nicalmeans.3.3 Fiber polishing equipmentEnd-polishing equipment may be used, although it is often unnecessary for thepurpose of making optical measurements.TIA-455-57-B33.4 Cleaning fluidsA cleaning fluid may be required, its composition dependent upon the chemistryof the fiber itself and its coatin

35、g (e.g., acetone, isopropyl alcohol and othersolvents have been successfully used with some fibers).CAUTION: Refer to 1.23.5 MicroscopeUse an optical microscope, such as the one specified in EIA-5460000. Typicalinspections can be accomplished with magnifications as prescribed in FOTP-13.Use a magnif

36、ication of 200X for U.S. military applications or for rigorousexamination of fibers with a diameter of less than or equal to 140 m.3.6 Fiber positioning and holding equipmentA means of positioning the fiber such that the fiber axis is perpendicular to theplane of cleaving, cutting or polishing is no

37、rmally used during cleaving, cuttingand polishing operations. Such fixtures shall be fabricated of materials that willnot degrade the acceptable endface quality. In positioning operations, positioningmeans may require use of curing fluids.3.1 InterferometerThe physical profile of fiber endfaces can

38、be measured with an interferometerconfigured to compare fiber endfaces to an optical flat (e.g., refer to FOTP-179).Such devices typically display a “contour map” of the fiber endface. End-anglesare computed from the number of fringes observed across the image of the fiberface (although this is stri

39、ctly valid only for straight, parallel fringe patterns).Interferometers specifically designed for measuring fiber endfaces arecommercially available. For critical measurements requiring flat, perpendicularendfaces, the interferometer is recommended. End-angles as small as 0.1degree and surface featu

40、res with heights/depths of about 0.2 to 0.3 m can beaccurately measured.3.8 Other equipmentSupplementary equipment may be used as required for auxiliary illumination,positioning, handling, accelerating fluid curing times, examination of the preparedend, etc. (e.g., local temperature changing apparat

41、us may be utilized, liquidsmay be used during polishing as carriers, lubricant, etc.).TIA-455-57-B44 Sampling and specimensA sample consists of the fiber or cable being prepared. Remove all protectivejacketing and buffer materials from the fiber end area, as required.5 Procedure5.1 ConditionsThis pr

42、ocedure may be conducted under factory ambient atmospheric conditionsor applicable field application environmental conditions as required. In case ofany dispute, repeat the procedure using Standard Atmospheric Conditionsrequired by EIA/TIA-455-A, clause 6.5.2 MethodsSelect the appropriate end prepar

43、ation method from the following as determinedby fiber type and/or application. Examination is performed according to 5.3.5.2.1 Procedure A - Fiber cleaving, cutting or slicingCleaving, cutting or slicing, as appropriate, is accomplished using suitableapparatus (refer to clause 3). The cleaving proce

44、dure (applicable to all-silicafibers and for plastic clad silica fibers) generally includes a “scoring” of the fibersperipheral surface or other means of inducing a stress concentration in adirection perpendicular to the fiber axis using a scribing device. Cleaving willgenerally be induced by extern

45、ally applied tensile or bending forces on the fiberperiphery in the area of “score” after and/or during this inducing of stressconcentration. This causes the “score” to propagate in a controlled manner,producing a cleave.For plastic clad silica fibers, remove the cladding from the fiber core by chem

46、ical,mechanical or other stripping means, to expose sufficient fiber core to permitcleaving. Following the cleaving, recoat the core with replacement claddingmaterials having a suitable index of refraction. This is not necessary if the plasticcladding is of sufficient hardness. These fibers will usu

47、ally be described as hardclad silica fibers.Cutting or splicing is typically used for all-plastic fiber. This is usuallyaccomplished by using a sharp blade to cut the fiber and is usually followed bypolishing.TIA-455-57-B55.2.2 Procedure B - Fiber polishingUsing suitable positioning means and polish

48、ing materials, expose the fiberspecimen to polishing surfaces that produce successively higher-quality fiber endfinishes and approaching a mirror end finish, as required. A “figure 8” pattern ofpolishing is generally used with manual polishing techniques.Preliminary grinding, chopping, cutting or br

49、eaking of the fiber specimen mayprecede the polishing operation. Care shall be exercised to avoid rough grindingor breaking that may cause “spikes” or crack propagation extending beyond theplane of polishing into the fiber core.This procedure is usually used for all-plastic fiber following the cutting procedure.It can also be used as an alternative procedure for all-silica and plastic clad silicafibers. However, for the purposes of testing, cleaving is normally used andconsidered sufficient for these fiber types.If polishing is required for plastic clad silica fibers, remove the