ARMY A-A-52051-1989 BINDING SKI ALPINE AND CROSS COUNTRY SNOW AND ICE TRAVERSING EQUIPMENT (SITE)《雪和冰通过设备(SITE)高山和越野滑雪捆绑带》.pdf

1、.- A-A-52051 LT = 7777774 0047370 3 W I - 78-10 I INCH-POUND 1 A-A-52051 October 12, 1989 CObMERCIAL ITEM DESCRIPTION BINDING, SKI, ALPINE AND CROSS COUNTRY, SNOW AND ICE TRAVERSING EQUIPMENT (SITE) The General Service Administration has authorized the use of this commercial item description, 1. SAL

2、IENT CHARACTERISTICS 1.1 Design and construction. 2-10-1 55. The ski binding shall conform to Drawing 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify, and maintain subtmtiating evidence, that the product offered meets the salient characteristics and requirements of this Commerci

3、al Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. conformance prior to first: delivery and there after as may be otherwise provided far under the provisions of the contract. The Government reserves the right

4、to require proof of such 2.1.1 Visual examination. accordance with MIL-STD-105. shall be expressed in units of ski bindings. binding. Each lot of ski bindings shall be inspected in The inspection level shall be II. The lot size The sample size shall be one ski The ski bindings shall be examined for

5、the defects listed below: Finish omitted or not as specified; burrs, rough spots, sharp edges; any component missing or not specified type; any component fractured, split, dented, bowed, malformed, damaged, loose or corroded; markings in wrong location, incomplete, illegible, incomplete or not as sp

6、ecified. Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Commander, U. S. Army Natick Research, Development, and Engineering Center, ATTN: STRNC-ES, Natick, MA 01760-5014. c FSC 8465 AMSC NIA e DISTRIBUT

7、ION STATEMENT A, Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A- A-SS 0-5.1 2.1 ,2 Dimensiona.1 .examination. The end items shal be examined without damaging or disassembling the end items as

8、 specified on the drawing. Only thosa dimenciohs that: can be evaluated shall be examine& the specified tolerances shall be classified as a defect. The iot size shall be expressed in. unifs of ski bindings. “he inspection level shall be S-3. Any dimension not within The sampze unit shall be one ski

9、binding. 3. PACKAGING 3.L Packaging- The ski bindings chalk be packaged as speciie& on Drawing 2-10-1 SEc 3-2 Marking. Harking shall be in accordance w2th MIL-STD-l29, 4.1 Intende4 use. military skiing. The ski binding is for use in both alpine and cross country 4,2 Ordering data. a. Title, number,

10、and date of this document. 4.3 The acceptable quality levels (AQLs) are recommended as follws: ar Far visual examination - 4.0 b. For dimensional examination - 2,s MlLPTARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians GSA - FSS &.view Activities Air Force - 11, 82 DtA CT PREPARING ACTIVITY: Army - GL (Project 8465-0034) u.aar Activity Air Farce - 45 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-