ARMY JJJ-B-106 G-1977 BEANS DRY《干豆》.pdf

1、J J J-B-106G June 28, 1977 SUPERSEDING Int. Fed. Spec. JJJ-B-00106F(Army-GL) October 19, 1973 and Fed. Spec. JJJ-B-106E August 25, 1969 FEDES Textile, Shipping, Burlap, Cotton and Water- proof Laminated. PPP-B-636 - Boxes, Shipping, Fiberboard. PPP-B-1714 - Bags, Shipping, Woven Polypropylene. Feder

2、al Standards: FED-STD-101 - Preservation, Packaging and Packing Materials: FED-STD-123 - Marking for Shipment (Civil Agencies) . Test Procedures. (Activities outside the Federal Government may obtain copies of Federal Speci- fications, Standards, and Handbooks as outlined under General Information i

3、n the index of Federal Specifications and Standards and at the prices indicated in the Index. The Index, which includes cumulative monthly supplements as issued, is for sale on a subscription basis by the Superintendent of Documents, US Government Printing Office, Washington, DC 20402. (Single copie

4、s of this specification and other Federal specifications required by activities outside the Federal Government for bidding purposes are available without charge from Business Service Centers at the General Services Administra- tion Regional Offices in Boston, New York, Washington, DC, Atlanta, Chica

5、go, Kansas City, M, Fort Worth, Denver, San Francisco, Los Angeles, and Seattle, WA. (Federal Government activities may obtain copies of Federal Specifications, Standards, and Handbooks and the Index of Federal Specifications and Standards from established distribution points in their agencies.) 3 L

6、icensed by Information Handling ServicesJJJ-B-106G Military Specifications: ML-L-10547 - Liners, Case, and Sheet, Overwrap: Water-Vaporproof MIL-T-21330 - Treatment: Insect-Resistant, for Paper. MIL-L-35078 - Loads, Unit: Preparation of Nonperishable Subsistence. or Waterproof Flexible. Military Sta

7、ndards: MLL-STD-105 - Sampling Procedures and Tables for Inspection by MIL-STD-129 - Marking for Shipment and Storage. MIL-STD-668 - Sanitary Standards for Food Plants. Attributes (Copies of Military Specifications and Standards required by con- tractors in connection with specific procurement funct

8、ions should be obtained from the procuring agency or as directed by the con- tracting officer.) LAWS AND REGULATIONS: Department of Health, Education and Welfare Federal Food, Drug and Cosmetic Act and Regulations Promulga-ed Thereunder Code of Federal Regulations, Part 128, Title 21 (Application fo

9、r copies should be addressed to the Superintendent of Documents, US Government Printing Office, Washington, DC 20402.) US Department of Agriculture United States Standards for Beans United States Standards for Condition of Food Containers (Application for copies should be addressed to the Grain Divi

10、sion, Agricultural Marketing Service, US Department of Agriculture, Washington, DC 20250 a ) 2.2 Other publications. The following documents form a part of this speci- fication to the extent specified herein. fied, the issue in effect on date of invitation for bids or request for proposal shall appl

11、y: Unless a specific issue is identi- Uniform Classification Committee, Agent Uniform Freight Classification (Application far copies should be addressed to the Uniform Classif icakion Committee, Raom 1106, 222 South Riverside Plaza, Chicago, IL 60606.) 4 Licensed by Information Handling ServicesJJJ-

12、B-LObG 87 777777q 0052500 T = JJJ-B-106G National Motor Freight Traffic Association, Inc., Ag ent National Motor Freight Classification (Application for copies should be addressed to the American Trucking Associa- tions, Inc., Traffic Department, 1616 P Street, N.W., Washington, DC 20036.) 3.1 Mater

13、ials. The beans shall conform in every respect to the requirements for type, class, grade and when applicable, the special. grade described in the Wited States Standards for Beans. 3.2 Description of grades and special grades. The requirements for the grades and special grades of beans shall be in a

14、ccordance with the United States Standards for Beans. 3.2.1 Bfoisture. Standards for Beans. The moisture content of dry beans shall comply with the US 3.2.1.1 For Military agencies, for export shipment. Type B red kidney beans shall not contain more than 14 percent, by weight, moisture. when specifi

15、ed, type B red kidney beans shall contain not more than 18 percent, by weight, moisture (see 6.1). Alternatively, 3.3 Federal Food, Drug and Cosmetic Act. All deliveries shall conform in every respect to the provisions of the Federal Food, Drug and Cosmetic Act and regulations promulgated thereunder

16、. 3.4 Workmanshie. For Civil agencies, the product shall be prepared in accordance with the Code of Federal Regulations, Part 128, Title 21, Human Foods ; Current Good banufacturing Practices (Sanitation) in Manufacturing, Processing, Packing or Holding. processed in establishments meeting the requi

17、rements of NIL-STD-668. For Military agencies, the product shall be 4. QUALITY ASSURANCE PROVISIOHS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. E

18、xcept as otherwise specified in the contract or order, the contractor may se his own or any other facilities suitable for the performance of the 5 Licensed by Information Handling ServicesE Government, The Government reserves the right to perform any if the inspection set forth in the specification

19、where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements, 4.1.1 Unless otherwise specified (see 6.1), the contractor is required to furnish an official inspection certificate issued by the U.S. Department of Agriculture certifying that the grade

20、of the product supplied is as required by the contract or order. 4.2.1 For Civil agencies. When specified (see 6 .l) , inspection of plants producing the product will be conducted upon the request of the contracting officer by the appropriate Government inspection agency. Award of contracts will be

21、limited to establishments known to maintain proper sanitary conditions or which have received prior sanitary approval recommended by the inspection I agency (see 3.4). plants not meeting the requirements of 3.4. I -r quality and condition is performed by the U.S. Department of Agriculture, the Unite

22、d States Standards for Condition of Food Containers shall apply. applicable criteria governing inspection of containers for the Military, see (For I I in accordance with MIL-STD-105, except as otherwise indicated hereinafter. I I and materials shall be inspected in accordance with the requirements o

23、f referenced specifications, drawings and standards unless otherwise excluded, amended, modified or qualified in this specification or applicable purchase document. 4.3.3.1 Plastic bags. Conformance to 5.1.2.2 as concerns kinds and thick- ness of bans shall be ascertained by examination of pertinent

24、 labels, invoices I or other valid, document I Licensed by Information Handling ServicesJJJ-B-L0hG B 97V 0052502 3 m JJJ-B-106G 4.3.3.2 Paper tape. Conformance of paper tape to basis weight requirements of 5.1.2.1, when used for pockets with sewn closures, shall be ascertained by examination of labe

25、ls or invoixes. 4.3.3.3 Paper pockets (not for ocean shipment). Basis weight of plies shall be ascertained by examination of pertinent invoices or other valid documents. 4.3.3.4 Testing of paper pockets (for ocean shipment). Paper pockets shall be tested for basis weight of plies in accordance with

26、4.4.2. shall be an average requirement. indicated by inspection level S-l. per ream. Test requirement The sample shall be the number of pockets Result shall be reported to nearest pound Lot size shall be expressed in pockets. 4.3.4 Examination of end item. Examination of end item shall be in accor-

27、dance with table I and 4.3.4.1 through 4.3.4.7, shall be as follows: Inspection level S-3; sample unit 1-filled primary container; acceptable quality level (AQL) expressed as percent defective 2.5. Sampling plans for table I Lot size shall be expressed in terms of the primary container. TABLE I. Exa

28、mination for net weight Minor- Not a snug pack; Minor-Number of interior containers not as specified; Major- Protective pad or tape, when required, missing, not as specified or not completely covering metal stitches. markings, and number of interior containem shall apply. In addition, the following

29、defects shall be included For level C pack, only the defects applicable to 7 Licensed by Information Handling Servicesdata for IRT sacks indicates sack will be more th tear, hole, open seam or broken stitches; number of interior packages not as required; fabrication In addition, the following defect

30、s shall be included in Licensed by Information Handling ServicesLicensed by Information Handling ServicesJJJ-B-lO6G are gusseted, the gussets shall be tucked in prior to sewing, and there shall be not less than five stitches per inch (25 m). When closure Is made by gluing, the edges of the pocket sh

31、all be folded and glued in such a manner as to provide a strong and sift-proof closure. When extensible papers are used, a bgsis weight equal to 90 percent of the specified basis weight shall be acceptable. I open-mouth. pounds t 5 percent per ream (24 x 36-500) (97.7 g/m2 t 5 percent). The inner an

32、d outer plies shall each have a basis weight of 60 I wltth 5.1.2.1.1 except that the basis weight for the inner ply shall be 40 pounds I - ply shall be 50 pounds t 5 percent per ream (2% x 36-500) 81.4 g/m2 + 5 percent). Alternatively the paper pocket may be a single ply of a basis weightof 80 pound

33、s rf: 5 percent per ream (24 x 36-500) (130.2 g/m2 2 5 percent). I 5.1.2.2 Plastic bags. or polypropylene bags in accordance with table II. effected by heat sealing or twist tie. Bag closure shall be I I - I the quantity specified (see 6.1). Pounds (kg) Inches (md 1 (0.45) O . 0015 (0.038) 2 (0.91)

34、O. 0015 (0.038) 4 (1.81) O. 00175 (O. 044) 10 (4.54) O .O04 (O. 102) I 10 Licensed by Information Handling ServicesJJJ-B-lO6G 5.1.3 Level C. deterioration and damage during shipment from the supply source to the first consuming activity. these requirements. Beans shall be packaged to afford adequate

35、 protection against The supplier may use his standard practice when it meets 5.2 Packing. Beans shall be packed in accordance with level A, By or C, as specified (see 6.1). into a shipping container. Beans of only one type, class and grade shall be packed 5.2.1 Level A (military agencies), 5.2.1.1 C

36、artons. Twenty-four or forty-eight 1-pound (0.45 kg) cartons shall be packed into a snug-fitting fiberboard box constructed, closed and reinforced in accordance with style RSC, V2s of PPP-B-636. The box shall be fitted with a waterproof case liner fabricated and closed in accordance with MIL-L-10547

37、 for subsistence items. When specified (see 6.1), the shipping container shall be reinforced in accordance with the appendix of PPP-B-636. by stitching, the waterproof case liner shall be protected from the stitching by inserting a 0.018-inch (0.46 mm) thick chipboard pad between the case liner and

38、the stitched flaps. The pad shall have dimensions equal to the interior of the shipping container, with a minus tolerance of not more than 3/16-inch (4.8 m). joint by covering the stitches with a strip of pressure-sensitive tape. When flaps are closed The case iner shall be protected from stitches i

39、n the manufacturers 5.2.1.2 Textile banc. Five 10-pound (4.54 kg) bags of beans shall be packed into a multi-wall paper shipping sack fabricated and closed in accordance with type I, style B, or type II, style A or By construction 9 or 9X, MB 2, of UU-S-48. accordance with MIL-T-21330. “he outer sur

40、face of the sack shall be insect-resistant-treated in 5.2.1.3 Plastic bags. Twenty-four or forty-eight 1-pound (0.45 kg) plastic bags shall be packed in a fiberboard shipping container constructed and closed in accordance with RSC-L, V2s of PPP-B-636. from stitching as specified in 5.2.1.1 except th

41、at the stitches in the manufac- turers joint need not be covered by tape. The plastic bags shall be protected 5.2,2 Level B. 5.2.2.1 Cartons. Twenty-four or 48 1-pound (0.45 kg) cartons of beans shall be packed on end in a snug-fitting fiberboard box constructed, closed, and rein- forced in accordan

42、ce with style RSC, VC, VS, or VS, of PPP-B-636. 11 Licensed by Information Handling ServicesJJJ-B-106G 5.2,2.1.1 When specified (see 6.2.2), the shipping container specified in 5.2.2.1 shall be reinforced with nonmetallic strapping or pressure-sensitive adhesive, filament reinforced tape in accordan

43、ce with PPP-33-636 except that two reinforcing bands may be used, one lengthwise and one girthwise. shipping container shall be fitted with a waterproof case liner fabricated and closed in accordance with MIL-L-10547 for subsistence items. shall be protected from stitches as specified in 5.2.1.1. Th

44、e The case liner 5.2.2.2 One, 2 or 4 pound (0.45, 0.91 or 1.81 kg) plastic bags. Twenty-four or 48 1-pound (0.45 kg), 12 or 24 2-pound (0.91 kg) or 12 4-pound (1.81 kg) plastic bags of beans shall be packed on end in a snug-fitting shipping con- tainer constructed,. closed, and reinforced in accorda

45、nce with style RSC-L, VC, VS, or VS, of PPP-B-636. in the flaps as specified in 5.2.1.1. Alternatively, 12 2-pound (O .91 kg) plastic bags of beans shall be packed in a snug-fitting intermediate fiber- board box constructed and closed in accordance with style RSC, type CF or SF, class domestic, grad

46、e 175, of PPP-B-636. in a snug-fitting fiberboard box in accordance with 5.2.2.1. The plastic bag shall be protected from stitches Two intermediate boxes shall be packed 5.2.2.2.1 When specified (see 6.2.2), the shipping container specified in 5.2.2.2 shall be reinforced with nonmetallic strapping o

47、r pressure-sensitive adhesive, filament reinforced tape in accordance with the appendix of PPP-B-636 except that two reinforcing bands shall be used, one lengthwise and one girthwise. surface of the sack shall be insect-resistant treated in accordance with MIL-T-21330. 5,2.3 Level C. 5.2,3,1 Cartons

48、. Twenty-four or 48 1-pound (0.45 kg) cartons of beans shall be packed on end in a shipping container in accordance with the Uniform Freight Classification or National Motor Freight Classification, as applicable. 5.2.3.2 Plastic bags. Twenty-four or forty-eight one pound (0.45 kg), twelve or twenty-

49、four 2 pound (0.91 kg) or twelve 4 pound (1.81 kg) plastic bags of beans shall be packed on end in a shipping container in accordance with the Uniform Freight Classification or National Motor Freight Classification, as applicable. 12 Licensed by Information Handling ServicesJJJ-B-L0bG 87 = 7777774 O052508 4 m JJJ-B-1O6G 5.2.3.3 Bags and sacks. One hundred pounds (45.36 kg) of beans shall be packed in a burlap bag complying with type I, B-4 or B-6, of PPP-B-35 or a cotton bag conforming to type II, C-54, of PPP-B-35. Alternatively, 100 pounds (45.36 kg) of beans shall be