ARMY MIL-B-40092 D-1987 BRAID TEXTILE CORD-EDGE POLYESTER《聚脂绦织物带》.pdf

1、 MIL-B-qOOSZD 3 7977706 0370688 L I C-Sd- distribution is unl-_ni-ed. THIS DOCUMENT CONTAINS /% PAGES. - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILITARY MIL -L-3 50 7 8 STANDARDS FEDERAL FXD-STD-191 MIL-B-40092D - Loads, Unit: Preparation of

2、 Semiperishable Subsistence Items; Clothing, Personal Equipment and Equipage; General Specification For - Textile Test Methods MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection MIL-STD-129 - Marking for Shipment and Storage MIL-STD-147 - Palletized Unit Loads MIL -STD -73 1 - Qual

3、ity of Wood Members for Containers and by Attributes Pallets (Copies of documents required by contractors in connection with specific acquisition functions should be obtained from the Contracting activity or as directed by the contracting activity. ) 2.1.2 Other Government documents. The following o

4、ther Government documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the solicitation. FEDERAL TRADE COMMISSION Rules and Regulations Under the Textile Fiber Products Identification Act (Application for

5、copies should be addressed to the Federal Trade Commission, Pennsylvania Avenue at Sixth Street, N.W., Washington, DC 20580.) * 2.2 Other publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which a

6、re DOD adopted shall be those listed in the issue of the DODISS Specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issues of the nongovernment documents which are current on the date of the solicitation. 2 Provided by IHSNot for R

7、esaleNo reproduction or networking permitted without license from IHS-,-,-IIL-B-qO092D 83 9999906 0370690 T M MIL-B-40092D incorrect ; illegible; of improper and interior) size, location, sequence, or method of application Materials Workmanship Content Any component missing, damaged, or not as speci

8、f ied Inadequate application of components, such as incomplete sealing or closure of flap, improper taping, loose strapping, or inadequate s tapling Bulged or distorted container Number of spools per container is more or less than required 11 f ic Provided by IHSNot for ResaleNo reproduction or netw

9、orking permitted without license from IHS-,-,-_. - _- MIL-B-40072D 3 W 777770b 0370679 b MIL-B-40092D 3c 4.4.5 Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The

10、 sample unit shall be one palletized unit load, fully packaged. The inspection level shall be S-1, and the AQL, expressed in terms of defects per hundred units, shall be 6.5. Examine Defect Finished dimens ions Length, width, or height exceeds specified maximum requirement Palletiz at ion Pallet pat

11、tern not as specified Interlocking of loads not as specified Load not bonded as specified Weight Exceeds maximum load limits Marking Omitted; incorrect; illegible; of improper size, location, sequence, or method of application 4.5 Methods of inspection. 4.5.1 Weight. Six specimens in excess of one y

12、ard each shall be selected at random from different spools in the sample. The six specimens of braid in the relaxed state shall then be cut to exactly one yard each. While in a Standard Condition as defined in FED-STD-191, each yard shall be weighed separated on a balance or, scale accurate to 0.01

13、ounce (a scale or balance graduated in grams may be used and results converted to ounces). of the six specimens shall be averaged and this average value multiplied by 144 to determine the ounces per gross (144) yards to the nearest 0.5 ounce. The weight 5. PACKAGING 5.1 Preservation. Preservation sh

14、all be level A or Commercial, as specified (see 6.2). 3c 5.1.1 Level A. Braid, put-up in the yardage specified in 3.6, shall be neatly wound on a 6-inch spool consisting of a chipboard tube approximately 3/4 inch outside diameter by 1/8 inch wall, mechanically attached to 5-1/2 inch diameter by 1/8

15、inch thick circular ends. Each spool shall be wrapped with a band of transparent plastic film or within minimum 30-pound kraft paper conforming to A-A-203. The wrap shall completely enclose the braid on the spool and shall be secured with gummed or pressure-sensitive tape. 12 Provided by IHSNot for

16、ResaleNo reproduction or networking permitted without license from IHS-,-,-flIL-B-qO072D 83 7779906 0390700 9 O MIL-B -40092D % 5.1.2 Commercial. Braid shall be preserved in accordance with ASTM D 3951. 5.2 Packing. Packing shall be level A, B, or Commercial, as specified (see 6.2). % 5.2.1 Level A

17、packing. Twenty-four spools of braid of one color only, preserved as specified in 5.1, shall be packed in a fiberboard shipping container conforming to style RSC, grade V2s of PPP-B-636. Level A unit packs shall be packed on the circular ends, four in length, three in width, and two in depth within

18、a shipping container. Inside dimensions of the container shall be approximately 22 1/2 inches in length, 17 inches in width, and 12 1/2 inches in depth. Approximate dimensions are furnished as a guide only. The top and bottom of the contents of each container shall be covered with a sheet of 30-poun

19、d minimum basis weight kraft paper conforming to A-A-203. shipping container shall be closed, waterproofed, and reinforced in accordance with the appendix of PPP-B-636. Shipping containers shall be arranged in unit loads in accordance with MIL-L-35078 for the type and class of load specified (see 6.

20、2). Strapping shall be limited to nonmetallic strapping, except for type II, class F loads. Each 5.2.2 Level B packing. Twenty-four spools of braid of one color only, preserved as specified in 5.1, shallbe packed in a fiberboard shipping container conforming to style RSC, type CF (variety SW) or SF,

21、 class domestic, grade 275 of PPP-B-636. ends, four in length, three in width, and two in depth within a shipping container. inches in length, 17 inches in width, and 12 1/2 inches in depth. Approximate dimensions are furnished as a guide only. The top and bottom of the contents of each container sh

22、all be covered with a sheet of 30-pound minimum basis weight kraft paper conforming to A-A-203. closed in accordance with method II as specified in the appendix of PPP-B-636. 5.2.2.1 Weather-resistant shipping container. When specified (see 6.2), Level A unit packs shall be packed on the circular In

23、side dimensions of the Container shall approximately 22 1/2 Each shipping container shall be the shipping container shall be a grade VC, VS, or V4s fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance with the appendix of PPP-B-636. E 5.2.3 Commercial packing. Braid, prese

24、rved as specified in 5.1, skiall be packed in accordance with ASTM D 3951. % 5.3 Palletization. When Specified (see 6.2), braid, packed as specified in 5.2.2 and 5.2.3, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. groups I, II, ILI, or IV of MIL-STD-731

25、. Pallet type shall be type I (4-way entry), type IV or type V in accordance with MIL-STD-147. Each prepared load Pallets shall be fabricated from wood 13 , .-_ . .- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-40092D a shall be bonded with

26、primary and secondary straps in accordance with bonding means K and L or film- bonding means O or P. in accordance with appendix of MIL-STD-147. Interlocking of loads shall be effected by reversing the pattern of each course. Pallet pattern shall be number-3 n 5.4 Marking. In addition to any special

27、 marking required by the contract or purchase order, shipping containers, unit packs, and palletized unit loads shall be marked in accordance with MIL-STD-129 or ASTM D 3951, as applicable. 6. NOTES 6.1 Intended use. The braid is intended for use as piping on clothing. 6.2 Ordering data. Acquisition

28、 documents should specify the following: 1 a. b. C. d. e. h. Title, number, and date of this document. When a first article is required (see 3.2, 4.3, and 6.4). Color required (see 3.4.1). Put-up if other than specified (see 3.6). Selection of applicable levels of preservation and packing (see 5.1 T

29、ype and class of unit load required (see 5.2.1). When weather-resistant grade fiberboard shipping containers are When palletization is required (see 5.3). and 5.2). required for level B packing (see 5.2.2.1). 6.3 Standard sample. For access to samples, address the contracting activity issuing the in

30、vitation for bids. 6.4 First article. When a first article is required, it shall be inspected and approved under the appropriate provisions of FAR 52.209. article should be a preproduction sample. specify the appropriate type of first article and the number of units to be furnished. The contracting

31、officer should include specific instructions in all acquisition instruments regarding arrangements for selection, inspection, and approval of the first article. The first The contracting officer should 6.5 Scouring. For industry guidance, the braid should be thoroughly scoured in order to remove sur

32、face dye. 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MLL-8-40072D 3 7777706 0370702 2 m MIL-B-40092D it 6.6 Dye and formulations. Suggested dye formulations for the following colors are as follows: Marine Corps Green 2220 Disperse Blue - 73 D

33、isperse Orange - 41 Disperse Yellow - 42 Army Green 260 Disperse Navy Blue - SWG Disperse Yellow - 92 Disperse Brown -1 .a 6.7 Reinforcement end color. Shade of the single reinforcement end (cotton yarn) is inconsequential. The single reinforcement end (cotton yarn) need not be dyed to match the col

34、or of the braid. s 6.8 Subject term (key word) listing. Braid, polyester Clothing Piping 6.9 Changes from previous issue. The margins of this document are marked with an asterisk (*) to indicate where changes (additions, modifications, corrections, deletions) from the previous issue were made. This

35、was done as a convenience only, and the Government assumes no liability whatsoever for any inaccuracies in these notations, Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content, as written, irrespective of the marginal notations and relation

36、ship to the last previous issue. Custodians: Preparing activity : Amy - GL Navy - Nu Air Force - 11 Review activities: Amy - MD DLA - CT Air Force - 82, 99 User activity: Navy - MC a i Army - GL Project No. 8315-0325 e 15 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-