ARMY MIL-C-51211 B-1967 CALCULATOR DOWNWIND TOXIC VAPOR HAZARD POINT SOURCE ABC-M2《ABC-M2型电源 顺风水蒸汽毒害计算器》.pdf

1、MIL-C-51211 B 30 June 1967 SUPERSEDING MI L-C-5 1 2 1 1 A( MU) 2 November 1966 MILITARY SPECIFICATION CALCULATOR, DOWNWIND TOXIC VAPOR HAZARD, POINT SOURCE, ABC-M2 This specification is mandatory for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1 o 1 This specification

2、covers one type of chemical agent calculator. 2. APPLICABLE DOCUMENTS 2.1 Government documents. The following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specifi- cation to the extent specified herein: SPECIFICATIONS FEDERAL PPP-B-601 -

3、 FTP- 8-636 - PPP-C-843 - P PP-F -320 I MILITARY MIL-P-116 - Boxes , Wood , C leated-PI ywood . Box, Fiberboard, Cushioning Material , Cellulosic. Fiberboard; Corrugated and Sol id, Sheet Stock (Container Grade), and Cut Shapes. Preservation, Methods of, Provided by IHSNot for ResaleNo reproduction

4、or networking permitted without license from IHS-,-,-MIL-C-51211B STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection MIL-STD-129 - Marking for Shipment and Storage. by Attributes. DRAW1 N GS US ARMY MUNITIONS COMMAND DL5-86-3 - Calculator, Downwind Toxic Vapor Hazard, (Al

5、l drawings referenced in this specification, with the exception of D150-2-1, are listed on the above Edgewood Arsenal drawing.) Point Source, ABC-M2. D 150-2- 1 - Marking Diagram for Shipping Confainers, (Copies of specifications, standards, drawings, and publications required by suppliers in connec

6、tion with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 2.2 Other publications. The following document.forms a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on dat

7、e of invitation for bids or request for proposal shall apply. U NI F ORM CLASS IF ICATI ON COMMITTEE -Uniform Freight Classification (Application for copies of these ratings, rules and regulations should be addressed to Uniform Classification Committee, 202 Union Station, 516 West Jackson Boulevard,

8、 Chicago, II I inois 606060) 3. REQUIREMENTS 3.1 Materials and components?. 3.1.1 Materials. All materials cited on Drawing DL5-86-3 or on the subsidiary drawings shall conform to the specifications listed thereon, or to thpesjfic 2 Provided by IHSNot for ResaleNo reproduction or networking permitte

9、d without license from IHS-,-,-. -_3- - MIL-C-51211 B characteristics set forth on the drawings. The ink used for marking and lettering shall be compatible with the vinyl chloride material. The printing shall be legible, non-fading and durable. 3.1.2 Components. All components of the calculator shal

10、l conform to the specifications and drawings I isted on Drawing DL5-86-3 and subsidiary drawings. 3.2 Manufacture and assembly. The calculator shall be manufactured and assembled in accordance with Drawing C5-86-3. 3.3 Functioning. The calculator, when tested in accordance with 4.3.4, shall be capab

11、le of solving problems for downwind toxic hazard distance and cloud width using the data listed in table I. Table I. Problem data Data Problem 1 Problem 2 Problem 3 Scale Source strength, kg (Q) Wind speed, meters per minute (U) Dosage, mg-minute per cubic meter Temperature gradient (ATG), OF Downwi

12、nd distance, km Cloud width, meters (Dl 4.53 54 1 O0 O 0044 + 0.04, 21 + 2- 4.53 107 50 2 1 +0.1 277 3 4.53 54 25 2 2,8 + 0.3 57+ - 6 3.4 Preproduction. Prior to the start of regular production, a preproduction sample of ABC-M2 calculators shall be produced in accordance with this specifi- cation -

13、for examination and test (see 4.2). 3.5 Workmanship. The calculator shall be free from imperfections such as pits, bumps, cracks, flash, abrasions, blisters, holes or porous areas and foreign matter (dirt, grease or oil). All surfaces shall be smooth and laminations shall be uniform without unsealed

14、 areas. .i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-51211 B 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. 4. i. 1 Suppliers responsibility. Unless otherwise specified in the contract or purchase order, the supplier i

15、s responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to the Govern- ment. The Government reserves the right to perform any of the inspections set forth

16、in the specification where such inspections are deemed necessary to assure suppl ies and services conform to specified requirements. 4.1.2 Obiective evidence. The supplier shall provide obiective evidence acceptable to the contracting officer that the requirements of 3.1 and section 5 for which spec

17、ific inspection has not been provided in this specification have been sat i sf i 8 d . 4.2 Preproduction. 4.2.1 Sample. A preproduction sample of five completely assembled ABC-M2 calculators and five unassembled.ABC-M2 calculators shall be manufactured using the same methods, materials, equipment an

18、d processes as will be used during regular produc tion. 4.2.2 Examination and nondestructive test. The components of the five unassembled calculators shall be examined for all the requirements of the drawings. The five assembled calculators shall be examined and tested in accordance with the classif

19、i- cation of defects (4.3,3.2). 4.2.3 Acceptance/rejection criteria. The preproduction sample shall comply , with the examinations and tests specified in 4.2.2 to be acceptable. -4.3 Regular production. 4.3,l Lotting. A lot shall consist of the ABC-M2 calculators produced by one manufacturer, at one

20、 plant, from the same materials, under essentially the same manufacturing conditions. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-SLZLLB 66 9 9997906 0140197 MIL-C-512116 4.3.2 Sampling for examination and nondestructive tests. Sampling s

21、hall be conducted in accordance with MIL-STD-105. For maior defect 101 level S-2shall be used. 4.3.3 Inspection o 4.3.3.1 Examination and nondestructive tests. Sample calculators shall be examined and tested in accordance with the classification of defects and MI L-STD-i 05. 4.3.3,2 Classification o

22、f defects. (a) Calculator, downwind toxic vapor hazard, point source, ABC-M2 (Dwg C5-86-3). Categories Critical: Maior: 1 o1 1 02 1 03 104 l5 . 106 1 07 Defects Acceptance standards None defined AQL 1 .O percent defective F unct ion ng 4.3.4 AQL 2.5 percent defective Component missing, in- correct,

23、or incorrectly assem b I ed Disk not free to turn easi I y Marking or lettering incorrect, i II egible or missing incorrectly located continuous Rivet holes in disks Case heat seal not Workmanship (3.5) 5 . i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

24、HS-,-,-. - MIL-C-SL2LLB 66 7777706 OLL10200 O MIL-C-5 121 1 B 4.3.4 Functioning test. Test shall be conducted as follows: Solve the three problems using the data listed in table I. Align dosage (D) with windspeed (U). - Rotate wing scale until it aligns with source strength(Q). Read the downwind dis

25、tance where the specified vertical temperature gradient curve and the downwind distance line intersect. Rotate the swing scale until it intersects the other tempera- ture gradient curve at the same reading as previously determined. Read the cloud width where the swing scale intersects. Check for com

26、pliance with table I as appl icable. 5. PREPARATION FOR DELIVERY 5.1 Packaging. Level shall be as specified (see 6.2). 5.1.1 Level A. The calculator, placed within its case, shall be individually packaged in accordance with method IC-3 of MIL-P-116. Prior to bag closure, a fiberboard filler the same

27、 size as the outside dimensions of the calculator case and conforming to type CF, class domestic, variety SW, grade 125 of PPP-F-320 shall be inserted in each bag to act as a stiffener. 5.1 . 2 Level C. The calculator, placed within its case, shall be packaged to provide adequate protection against

28、deterioration and physical damage from the supply source to the first receiving activity for immediate use. 5.2 Packing. Level shall be as specified (see 6.2). 5.2.1 Level A, One hundred calculators, fjackaged as specified in 5,l. 1, shall be packed within an overseas type cleated-plywood box confor

29、ming to PPP-6-601 . Cushioning material, conforming to type II, class A of PPP-C-843, shall be used to fill all voids within the box. The box shall be closed and strapped in accordance with the appendix of PPP-B-601 . Galvanized strapping shall be used . 5.2.2 Level B. One hundred calculators, packa

30、ged as specified in 5.1 1, shall be packed in a VC, style RSC fiberboard box conforming to PPP-6-636. In addition to box closure requirements, the box seams and manufacturers joint shall be taped. Tape banding shall be used in lieu of metal banding as a box reinforcement o 6 -, Provided by IHSNot fo

31、r ResaleNo reproduction or networking permitted without license from IHS-,-,- NIL-C-532LLB 66 7777706 0340203 2-y . .-=- MIL-C-51211B 5.2.3 Level C. One hundred calculators, packaged as specified in 5.1.2, shall be packed to insure carrier acceptance and safe delivery to the first domestic destinati

32、on. Containers shall be in compliance with Uniform Freight Classification rules or the regulations of other common carriers applicable to the mode of transportation. 5.3 Marking. In addition to any special marking required by the contract or order, unit packages shall be marked in accordance with MI

33、L-STD-129. Shipping containers shall be marked in accordance with Drawing D15012-1. 6, NOTES 6,l Intended use. This calculator is intended for use in calculating downwind hazard of chemical agents. 6.2 Ordering data. Procurement documents should specify the following: (a) Title, number and date of t

34、his specification. (b) Level of packaging and packing required. (c) Preproduction: (1) Time allowed for supplier submission of samples for Government (2) Name and address of test facility and shipping instructions (3) Time allowed for the Government to notify the suppli,er whether test and evaluatio

35、n after award of contract. when testing is performed by the Government. or not to proceed with production, 6.3 International interest. Certain provisions of this specification are the subject of international standardization agreement (see Serial No. 29, Supple- ment B to Quadripartite Standardizati

36、on List Sheet Report). When amendment, revision or cancellation of this specification is proposed which will affect or violate the international agreement concerned, the preparing activity will take appropriate reconciliation action through international standardization channels i nc I ud ing de par

37、tme nta I standard iza tion off i ces, if req vi red. Custodians: Pre#aring activity: Army - MU Air Force - 82 International interest (see section 6) Army - MU (EA) Project No. 6665-0151 Review activities: Coordination Method Code: C Air Force - 82 . -fi+, W.S. GOVERNMENT PRINTING OFFICE: 1967-301-511/1255 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-