ARMY MIL-D-38024 B (1)-1967 DROGUE PARACHUTE STATIC LINE《强制开伞拉绳套》.pdf

1、. MIL-D-302LIB (1) Lb 9999906 OL953bL 2 W / MIL-D-3 8024B 28 July 1967 AMENDMENT-1 MILITARY SPECIFICATION DROGUE, PARACHUTE STATIC LINE This amendment forma a part of MiEtary SpeCifiCatiOn MIGD-98024B, dated 27 August 1965, and is mandatory for use by all Departments and Agencies of the Department o

2、f Defense. Page 1 , paragraph 2.1, under listing of Federal Specifications, delete “V-T-295-Thread, Nylon,” and add “PPP-B-601-Boxes, Wood, Cleated-Plywood.” Under listing of Military Specifications, delete listing- in its entirety and add “MIL 610547 Liners, Case and Sheet, Overwrap ; Water-Vaporpr

3、oof or Waterproof, FIexible.” Under listing of Federal Standards, delete “FED. STD. NO. 7514titches, Seams and Stitchings.” Page 8, add the following new paragraph: “4.3.2 In-process inspection. Inspection shall be made at appropriate stages of fabrica- tion to determine conformance to the requireme

4、nts of this specification. The Government reserves the right to exclude from consideration for acceptance any material(s) for which in-process inspection has indicated non-conformance.” Page 6, paragraph 5.1.2, first sentence. After “against,” insert “deterioration and physical.” Paragraph 5.2.1, de

5、lete in entirety and substitute : “5.2.1 Level A. Seven hundred and fifty drogues, packaged as specified in 5.1, shall be packed in a fiberboard shipping container conforming to style RSC-L, V2s of PPP- B-636. The inside of each fiberboard shipping container shall be fitted with a taped liner confor

6、ming to grade V3c of PPP-B-636. Alternatively, shipping containers shall conform to overseas type, style A, type 2 load of PPP-B-601. Level A packages shall be packed flat, three in length, five in width, and five in depth within a shipping container. Inside dimensions of each shipping container sha

7、ll approximate 25y2 inches in length, 22y2 inches in width and 18y4 inches in depth. Approximate dimensions are furnished as a guide only. Each container shall have the contents completely covered on the top and bottom with a sheet of 30 pound minimum basis weight kraft paper conforming to grade B o

8、f UU-P- 268. Each fiberboard shipping container shall be closed, waterproofed, and reinforced with flat strapping or tape banding in accordance with the appendix of PPP-B-636. Each cleated plywood shipping container shall be provided with a sealed case liner conforming r Provided by IHSNot for Resal

9、eNo reproduction or networking permitted without license from IHS-,-,-MILD-38024B Amendment-1 to type I or II, grade C of MILL-10547, and flat steel strapped in accordance With the appendix of PPP-B-601.” Paragraph 5.2.2, last sentence, after %losed” delete “method II” ; and after “with” insert “met

10、hod II as specified in.” Add the following new paragraph: “5.2.2.1 When specified (see 6.2), shipping containers shall be fabricated from grade V3c or V3s fiberboard.” Page 7, paragraph 5.3, lines 2 and 3, delete “intermediate” and substitute “interior. Paragraph 6.2, add “e. When V-board shipping c

11、ontainers are required for level B shipments, (see 6.2.2.1) .” Custodians: Army-GL Navy-MC Air Force-11 -1 Preparing activity: Army-GL Project No. 1670-0218 ( * U. S. GOVERNMENT PRINTING OFFICE; 301-067-1967-(268) I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-