ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf

1、AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND MIL-PRF-49470/1E 14 May 2012 SUPERSEDING MIL-PRF-49470/1D 19 January 2011 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND

2、 TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, UNENCAPSULATED, HORIZONTALLY STACKED, STYLE PS01 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of th

3、is specification sheet and MIL-PRF-49470. FIGURE 1. Style PS01 capacitors. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 2 NOTES: 1. Dimensions are in inches. 2

4、 Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .010 inch (0.25 mm). 4. Lead frame configuration is shown as typical above the seating plane. A seating plane is only required for lead style N. 5. See table I for specific maximum A dimension.

5、 For maximum B dimension, add .065 inch (1.65 mm) to the appropriate A dimension. For all lead styles, the number of chips is determined by the capacitance and voltage rating. 6. For case code 5, dimensions shall be .100 inch (2.54 mm) maximum and .012 inch (0.30 mm) minimum. 7. Lead alignment withi

6、n pin rows shall be within .005 inch (0.13 mm). FIGURE 1. Style PS01 capacitors - Continued. Dimensions Case code C .025 D E (max) Number of leads per side Min Max 1 .450 1.950 2.075 .500 20 2 .800 1.450 1.535 .870 15 3 .450 .950 1.075 .500 10 4 .400 .350 .425 .440 4 5 .250 .224 .275 .300 3 6 1.250

7、1.950 2.075 1.350 20 Symbol (last digit of PIN) Lead style Height profile (Dimension A) Formed lead length, L (inches) N N (straight) Standard N/A L L (formed) Standard .070 .010 M L (formed) Standard .045 .010 J J (formed) Standard .070 .010 K J (formed) Standard .045 .010 A N (straight) Low N/A B

8、L (formed) Low .070 .010 D L (formed) Low .045 .010 C J (formed) Low .070 .010 F J (formed) Low .045 .010 Inches mm .002 0.05 .010 0.25 .020 0.51 .025 0.64 .050 1.27 .055 1.40 .070 1.78 .100 2.54 .224 5.69 .250 6.35 .275 6.98 .300 7.62 .350 8.89 .400 10.16 .425 10.80 .440 11.18 .450 11.43 .500 12.70

9、 .800 20.32 .870 22.10 .950 24.13 1.075 27.30 1.250 31.75 1.350 34.29 1.450 36.83 1.535 38.99 1.950 49.53 2.075 52.70 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470

10、/1E 3 REQUIREMENTS: Precautionary note: Capacitors covered by this specification sheet are very susceptible to thermal shock damage due to their large ceramic mass. Temperature profiles used should provide adequate temperature rise and cool-down time to prevent damage from thermal shock. Dimensions

11、and configurations: See figure 1. Case type: Unencapsulated, horizontally stacked. Capacitance: See table I. Capacitance tolerance: J = 5 percent, K = 10 percent, M = 20 percent. Operating temperature range: -55C to +125C. Voltage rating: See table I. Dielectric types: BP, BQ, BR, and BX in accordan

12、ce with MIL-PRF-49470. Temperature coefficient: 0 ppm/C 30 ppm/C (BP), 15 percent (BQ, BR, BX). Voltage-temperature limits: In accordance with MIL-PRF-49470. Symbol Capacitance change with reference to +25C Step A through step D of voltage-temperature limit cycle table of MIL-PRF-49470 Step E throug

13、h step G of voltage-temperature limit cycle table of MIL-PRF-49470 BP BQ BR BX 0 ppm/C 30 ppm/C 15 percent 15 percent 15 percent 0 ppm/C 30 ppm/C +15, -50 percent +15, -40 percent +15, -25 percent Marking: In accordance with MIL-PRF-49470. Body insulation: Not applicable. Solderability: The leads sh

14、all be solderable up to the seating plane. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 4 TABLE I. Capacitor characteristics. Part or Identifying Number (PIN)

15、1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 25 V -49470X01155-Z- 1.5 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01185-Z- 1.8 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01225-Z- 2.2 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01275-Z- 2.7 K, M

16、BX 5 N, L, M, J, K .240 (6.10) -49470X01335-Z- 3.3 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01395-Z- 3.9 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01475-Z- 4.7 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01565-Z- 5.6 K, M BX 5 N, L, M, J, K .360 (9.14) -49470X01685-Z- 6.8 K, M BX 5 N, L, M, J, K .

17、360 (9.14) -49470X01685-Z- 6.8 K, M BX 4 A, B, D, C, F .120 (3.05) -49470X01825-Z- 8.2 K, M BX 5 N, L, M, J, K .480 (12.19) -49470X01825-Z- 8.2 K, M BX 4 A, B, D, C, F .240 (6.10) -49470X01106-Z- 10 K, M BX 5 N, L, M, J, K .650 (16.51) -49470X01106-Z- 10 K, M BX 4 A, B, D, C, F .240 (6.10) -49470X01

18、126-Z- 12 K, M BX 4 N, L, M, J, K .240 (6.10) -49470X01156-Z- 15 K, M BX 4 N, L, M, J, K .360 (9.14) -49470X01156-Z- 15 K, M BX 3 A, B, D, C, F .120 (3.05) -49470X01186-Z- 18 K, M BX 4 N, L, M, J, K .360 (9.14) -49470X01186-Z- 18 K, M BX 3 A, B, D, C, F .120 (3.05) -49470X01226-Z- 22 K, M BX 4 N, L,

19、 M, J, K .480 (12.19) -49470X01226-Z- 22 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01276-Z- 27 K, M BX 4 N, L, M, J, K .480 (12.19) -49470X01276-Z- 27 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01336-Z- 33 K, M BX 4 N, L, M, J, K .650 (16.51) -49470X01336-Z- 33 K, M BX 3 A, B, D, C, F .240 (6.10) -

20、49470X01396-Z- 39 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01396-Z- 39 K, M BX 1 A, B, D, C, F .240 (6.10) -49470X01476-Z- 47 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01476-Z- 47 K, M BX 1 A, B, D, C, F .240 (6.10) -49470X01566-Z- 56 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01566-Z- 56 K, M B

21、X 1 A, B, D, C, F .360 (9.14) -49470X01686-Z- 68 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01686-Z- 68 K, M BX 1 A, B, D, C, F .360 (9.14) -49470X01826-Z- 82 K, M BX 3 N, L, M, J, K .650 (16.51) -49470X01826-Z- 82 K, M BX 1 A, B, D, C, F .360 (9.14) -49470X01107-Z- 100 K, M BX 1 N, L, M, J, K .480

22、 (12.19) -49470X01107-Z- 100 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01127-Z- 120 K, M BX 1 N, L, M, J, K .650 (16.51) -49470X01127-Z- 120 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01157-Z- 150 K, M BX 2 N, L, M, J, K .480 (12.19) -49470X01157-Z- 150 K, M BX 6 A, B, D, C, F .240 (6.10) -49470X01

23、187-Z- 180 K, M BX 2 N, L, M, J, K .650 (16.51) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 5 TABLE I. Capacitor characteristics

24、 - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 25 V -49470X01187-Z- 180 K, M BX 6 A, B, D, C, F .360 (9.14) -49470X01227-Z- 220 K, M BX 6 N, L, M, J, K .360 (9.14) -49470X01277-Z- 270 K, M BX 6 N, L

25、 M, J, K .480 (12.19) -49470X01337-Z- 330 K, M BX 6 N, L, M, J, K .650 (16.51) -49470X01397-Z- 390 K, M BX 6 N, L, M, J, K .650 (16.51) 50 V -49470P01563-A- 0.056 J, K BP 5 N, L, M, J, K .120 (3.05) -49470P01683-A- 0.068 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01823-A- 0.082 J, K BP 5 N, L, M, J

26、 K .240 (6.10) -49470P01104-A- 0.1 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01124-A- 0.12 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01154-A- 0.15 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01184-A- 0.18 J, K BP 5 N, L, M, J, K .480 (12.19) -49470P01184-A- 0.18 J, K BP 4 A, B, D, C, F .240 (6.10)

27、 -49470P01224-A- 0.22 J, K BP 5 N, L, M, J, K .480 (12.19) -49470P01224-A- 0.22 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01274-A- 0.27 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01274-A- 0.27 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01334-A- 0.33 J, K BP 4 N, L, M, J, K .360 (9.14) -49470P01394

28、A- 0.39 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01474-A- 0.47 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01564-A- 0.56 J, K BP 4 N, L, M, J, K .650 (16.61) -49470P01564-A- 0.56 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01684-A- 0.68 J, K BP 3 N, L, M, J, K .240 (6.10) -49470P01824-A- 0.82 J,

29、K BP 3 N, L, M, J, K .240 (6.10) -49470P01105-A- 1 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01105-A- 1 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01125-A- 1.2 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01125-A- 1.2 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01155-A- 1.5 J, K BP 3 N, L, M, J, K .48

30、0 (12.19) -49470X01155-A- 1.5 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01185-A- 1.8 J, K BP 3 N, L, M, J, K .480 (12.19) -49470X01185-A- 1.8 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01225-A- 2.2 J, K BP 3 N, L, M, J, K .650 (16.51) -49470P01225-A- 2.2 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X0

31、1225-A- 2.2 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01275-A- 2.7 J, K BP 1 N, L, M, J, K .360 (9.14) -49470P01275-A- 2.7 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X01275-A- 2.7 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01335-A- 3.3 J, K BP 1 N, L, M, J, K .480 (12.19) -49470P01335-A- 3.3 J, K BP

32、 2 A, B, D, C, F .360 (9.14) -49470X01335-A- 3.3 K, M BX 5 N, L, M, J, K .360 (9.14) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E

33、 6 TABLE I. Capacitor characteristics - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 50 V -49470P01395-A- 3.9 J, K BP 1 N, L, M, J, K .480 (12.19) -49470P01395-A- 3.9 J, K BP 2 A, B, D, C, F .360 (9.

34、14) -49470X01395-A- 3.9 K, M BX 5 N, L, M, J, K .480 (12.19) -49470P01475-A- 4.7 J, K BP 1 N, L, M, J, K .650 (16.51) -49470P01475-A- 4.7 J, K BP 2 A, B, D, C, F .480 (12.19) -49470X01475-A- 4.7 K, M BX 5 N, L, M, J, K .480 (12.19) -49470X01475-A- 4.7 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01565

35、A- 5.6 J, K BP 2 N, L, M, J, K .650 (16.51) -49470X01565-A- 5.6 K, M BX 5 N, L, M, J, K .650 (16.51) -49470X01565-A- 5.6 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01685-A- 6.8 J, K BP 6 N, L, M, J, K .360 (9.14) -49470X01685-A- 6.8 K, M BX 4 N, L, M, J, K .360 (9.14) -49470P01825-A- 8.2 J, K BP 6

36、N, L, M, J, K .360 (9.14) -49470X01825-A- 8.2 K, M BX 4 N, L, M, J, K .360 (9.14) -49470P01106-A- 10 J, K BP 6 N, L, M, J, K .480 (12.19) -49470X01106-A- 10 K, M BX 4 N, L, M, J, K .480 (12.19) -49470P01126-A- 12 J, K BP 6 N, L, M, J, K .480 (12.19) -49470X01126-A- 12 K, M BX 4 N, L, M, J, K .480 (1

37、2.19) -49470P01156-A- 15 J, K BP 6 N, L, M, J, K .650 (16.51) -49470X01156-A- 15 K, M BX 4 N, L, M, J, K .650 (16.51) -49470X01156-A- 15 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01186-A- 18 K, M BX 3 N, L, M, J, K .240 (6.10) -49470X01226-A- 22 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01276-A- 2

38、7 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01336-A- 33 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01396-A- 39 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01476-A- 47 K, M BX 3 N, L, M, J, K .650 (16.51) -49470X01476-A- 47 K, M BX 2 A, B, D, C, F .240 (6.10) -49470X01566-A- 56 K, M BX 1 N, L, M, J,

39、 K .360 (9.14) -49470X01566-A- 56 K, M BX 2 A, B, D, C, F .240 (6.10) -49470X01686-A- 68 K, M BX 1 N, L, M, J, K .480 (12.19) -49470X01686-A- 68 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01826-A- 82 K, M BX 1 N, L, M, J, K .480 (12.19) -49470X01826-A- 82 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X0

40、1107-A- 100 K, M BX 1 N, L, M, J, K .650 (16.51) -49470X01107-A- 100 K, M BX 2 A, B, D, C, F .480 (12.19) -49470X01127-A- 120 K, M BX 2 N, L, M, J, K .480 (12.19) -49470X01157-A- 150 K, M BX 2 N, L, M, J, K .650 (16.51) -49470X01187-A- 180 K, M BX 6 N, L, M, J, K .480 (12.19) -49470X01227-A- 220 K,

41、M BX 6 N, L, M, J, K .480 (12.19) -49470X01277-A- 270 K, M BX 6 N, L, M, J, K .650 (16.51) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49

42、470/1E 7 TABLE I. Capacitor characteristics - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 100 V -49470P01473-B- 0.047 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01563-B- 0.056 J, K BP 5 N, L, M, J,

43、K .240 (6.10) -49470P01683-B- 0.068 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01823-B- 0.082 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01104-B- 0.1 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01124-B- 0.12 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01154-B- 0.15 J, K BP 5 N, L, M, J, K .480 (12.19)

44、 -49470P01154-B- 0.15 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01184-B- 0.18 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01184-B- 0.18 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01224-B- 0.22 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01224-B- 0.22 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01274

45、B- 0.27 J, K BP 4 N, L, M, J, K .360 (9.14) -49470P01334-B- 0.33 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01394-B- 0.39 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01474-B- 0.47 J, K BP 4 N, L, M, J, K .650 (16.51) -49470P01474-B- 0.47 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01564-B- 0.56 J,

46、K BP 4 N, L, M, J, K .650 (16.51) -49470P01564-B- 0.56 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01684-B- 0.68 J, K BP 3 N, L, M, J, K .240 (6.10) -49470X01684-B- 0.68 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01824-B- 0.82 J, K BP 3 N, L, M, J, K .120 (3.05) -49470X01824-B- 0.82 K, M BX 5 N, L, M

47、 J, K .240 (6.10) -49470P01105-B- 1 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01105-B- 1 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01125-B- 1.2 J, K BP 3 N, L, M, J, K .480 (12.19) -49470X01125-B- 1.2 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01155-B- 1.5 J, K BP 3 N, L, M, J, K .480 (12.19) -49

48、470X01155-B- 1.5 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01185-B- 1.8 J, K BP 3 N, L, M, J, K .650 (16.51) -49470P01185-B- 1.8 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X01185-B- 1.8 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01225-B- 2.2 J, K BP 1 N, L, M, J, K .480 (12.19) -49470X01225-B- 2.2 K

49、 M BX 5 N, L, M, J, K .480 (12.19) -49470X01225-B- 2.2 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01275-B- 2.7 J, K BP 1 N, L, M, J, K .480 (12.19) -49470X01275-B- 2.7 K, M BX 5 N, L, M, J, K .480 (12.19) -49470P01335-B- 3.3 J, K BP 1 N, L, M, J, K .650 (16.51) -49470P01335-B- 3.3 J, K BP 2 A, B, D, C, F .480 (12.19) -49470X01335-B- 3.3 K, M BX 5 N, L, M, J, K .650 (16.51) -49