ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf

上传人:appealoxygen216 文档编号:447369 上传时间:2018-11-16 格式:PDF 页数:12 大小:191.52KB
下载 相关 举报
ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf_第1页
第1页 / 共12页
ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf_第2页
第2页 / 共12页
ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf_第3页
第3页 / 共12页
ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf_第4页
第4页 / 共12页
ARMY MIL-PRF-49470 1 E-2012 CAPACITOR FIXED CERAMIC DIELECTRIC SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE) STANDARD RELIABILITY AND HIGH RELIABILITY UNENCAPSU.pdf_第5页
第5页 / 共12页
亲,该文档总共12页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND MIL-PRF-49470/1E 14 May 2012 SUPERSEDING MIL-PRF-49470/1D 19 January 2011 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND

2、 TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, UNENCAPSULATED, HORIZONTALLY STACKED, STYLE PS01 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of th

3、is specification sheet and MIL-PRF-49470. FIGURE 1. Style PS01 capacitors. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 2 NOTES: 1. Dimensions are in inches. 2

4、 Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .010 inch (0.25 mm). 4. Lead frame configuration is shown as typical above the seating plane. A seating plane is only required for lead style N. 5. See table I for specific maximum A dimension.

5、 For maximum B dimension, add .065 inch (1.65 mm) to the appropriate A dimension. For all lead styles, the number of chips is determined by the capacitance and voltage rating. 6. For case code 5, dimensions shall be .100 inch (2.54 mm) maximum and .012 inch (0.30 mm) minimum. 7. Lead alignment withi

6、n pin rows shall be within .005 inch (0.13 mm). FIGURE 1. Style PS01 capacitors - Continued. Dimensions Case code C .025 D E (max) Number of leads per side Min Max 1 .450 1.950 2.075 .500 20 2 .800 1.450 1.535 .870 15 3 .450 .950 1.075 .500 10 4 .400 .350 .425 .440 4 5 .250 .224 .275 .300 3 6 1.250

7、1.950 2.075 1.350 20 Symbol (last digit of PIN) Lead style Height profile (Dimension A) Formed lead length, L (inches) N N (straight) Standard N/A L L (formed) Standard .070 .010 M L (formed) Standard .045 .010 J J (formed) Standard .070 .010 K J (formed) Standard .045 .010 A N (straight) Low N/A B

8、L (formed) Low .070 .010 D L (formed) Low .045 .010 C J (formed) Low .070 .010 F J (formed) Low .045 .010 Inches mm .002 0.05 .010 0.25 .020 0.51 .025 0.64 .050 1.27 .055 1.40 .070 1.78 .100 2.54 .224 5.69 .250 6.35 .275 6.98 .300 7.62 .350 8.89 .400 10.16 .425 10.80 .440 11.18 .450 11.43 .500 12.70

9、 .800 20.32 .870 22.10 .950 24.13 1.075 27.30 1.250 31.75 1.350 34.29 1.450 36.83 1.535 38.99 1.950 49.53 2.075 52.70 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470

10、/1E 3 REQUIREMENTS: Precautionary note: Capacitors covered by this specification sheet are very susceptible to thermal shock damage due to their large ceramic mass. Temperature profiles used should provide adequate temperature rise and cool-down time to prevent damage from thermal shock. Dimensions

11、and configurations: See figure 1. Case type: Unencapsulated, horizontally stacked. Capacitance: See table I. Capacitance tolerance: J = 5 percent, K = 10 percent, M = 20 percent. Operating temperature range: -55C to +125C. Voltage rating: See table I. Dielectric types: BP, BQ, BR, and BX in accordan

12、ce with MIL-PRF-49470. Temperature coefficient: 0 ppm/C 30 ppm/C (BP), 15 percent (BQ, BR, BX). Voltage-temperature limits: In accordance with MIL-PRF-49470. Symbol Capacitance change with reference to +25C Step A through step D of voltage-temperature limit cycle table of MIL-PRF-49470 Step E throug

13、h step G of voltage-temperature limit cycle table of MIL-PRF-49470 BP BQ BR BX 0 ppm/C 30 ppm/C 15 percent 15 percent 15 percent 0 ppm/C 30 ppm/C +15, -50 percent +15, -40 percent +15, -25 percent Marking: In accordance with MIL-PRF-49470. Body insulation: Not applicable. Solderability: The leads sh

14、all be solderable up to the seating plane. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 4 TABLE I. Capacitor characteristics. Part or Identifying Number (PIN)

15、1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 25 V -49470X01155-Z- 1.5 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01185-Z- 1.8 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01225-Z- 2.2 K, M BX 5 N, L, M, J, K .120 (3.05) -49470X01275-Z- 2.7 K, M

16、BX 5 N, L, M, J, K .240 (6.10) -49470X01335-Z- 3.3 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01395-Z- 3.9 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01475-Z- 4.7 K, M BX 5 N, L, M, J, K .240 (6.10) -49470X01565-Z- 5.6 K, M BX 5 N, L, M, J, K .360 (9.14) -49470X01685-Z- 6.8 K, M BX 5 N, L, M, J, K .

17、360 (9.14) -49470X01685-Z- 6.8 K, M BX 4 A, B, D, C, F .120 (3.05) -49470X01825-Z- 8.2 K, M BX 5 N, L, M, J, K .480 (12.19) -49470X01825-Z- 8.2 K, M BX 4 A, B, D, C, F .240 (6.10) -49470X01106-Z- 10 K, M BX 5 N, L, M, J, K .650 (16.51) -49470X01106-Z- 10 K, M BX 4 A, B, D, C, F .240 (6.10) -49470X01

18、126-Z- 12 K, M BX 4 N, L, M, J, K .240 (6.10) -49470X01156-Z- 15 K, M BX 4 N, L, M, J, K .360 (9.14) -49470X01156-Z- 15 K, M BX 3 A, B, D, C, F .120 (3.05) -49470X01186-Z- 18 K, M BX 4 N, L, M, J, K .360 (9.14) -49470X01186-Z- 18 K, M BX 3 A, B, D, C, F .120 (3.05) -49470X01226-Z- 22 K, M BX 4 N, L,

19、 M, J, K .480 (12.19) -49470X01226-Z- 22 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01276-Z- 27 K, M BX 4 N, L, M, J, K .480 (12.19) -49470X01276-Z- 27 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01336-Z- 33 K, M BX 4 N, L, M, J, K .650 (16.51) -49470X01336-Z- 33 K, M BX 3 A, B, D, C, F .240 (6.10) -

20、49470X01396-Z- 39 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01396-Z- 39 K, M BX 1 A, B, D, C, F .240 (6.10) -49470X01476-Z- 47 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01476-Z- 47 K, M BX 1 A, B, D, C, F .240 (6.10) -49470X01566-Z- 56 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01566-Z- 56 K, M B

21、X 1 A, B, D, C, F .360 (9.14) -49470X01686-Z- 68 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01686-Z- 68 K, M BX 1 A, B, D, C, F .360 (9.14) -49470X01826-Z- 82 K, M BX 3 N, L, M, J, K .650 (16.51) -49470X01826-Z- 82 K, M BX 1 A, B, D, C, F .360 (9.14) -49470X01107-Z- 100 K, M BX 1 N, L, M, J, K .480

22、 (12.19) -49470X01107-Z- 100 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01127-Z- 120 K, M BX 1 N, L, M, J, K .650 (16.51) -49470X01127-Z- 120 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01157-Z- 150 K, M BX 2 N, L, M, J, K .480 (12.19) -49470X01157-Z- 150 K, M BX 6 A, B, D, C, F .240 (6.10) -49470X01

23、187-Z- 180 K, M BX 2 N, L, M, J, K .650 (16.51) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E 5 TABLE I. Capacitor characteristics

24、 - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 25 V -49470X01187-Z- 180 K, M BX 6 A, B, D, C, F .360 (9.14) -49470X01227-Z- 220 K, M BX 6 N, L, M, J, K .360 (9.14) -49470X01277-Z- 270 K, M BX 6 N, L

25、 M, J, K .480 (12.19) -49470X01337-Z- 330 K, M BX 6 N, L, M, J, K .650 (16.51) -49470X01397-Z- 390 K, M BX 6 N, L, M, J, K .650 (16.51) 50 V -49470P01563-A- 0.056 J, K BP 5 N, L, M, J, K .120 (3.05) -49470P01683-A- 0.068 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01823-A- 0.082 J, K BP 5 N, L, M, J

26、 K .240 (6.10) -49470P01104-A- 0.1 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01124-A- 0.12 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01154-A- 0.15 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01184-A- 0.18 J, K BP 5 N, L, M, J, K .480 (12.19) -49470P01184-A- 0.18 J, K BP 4 A, B, D, C, F .240 (6.10)

27、 -49470P01224-A- 0.22 J, K BP 5 N, L, M, J, K .480 (12.19) -49470P01224-A- 0.22 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01274-A- 0.27 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01274-A- 0.27 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01334-A- 0.33 J, K BP 4 N, L, M, J, K .360 (9.14) -49470P01394

28、A- 0.39 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01474-A- 0.47 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01564-A- 0.56 J, K BP 4 N, L, M, J, K .650 (16.61) -49470P01564-A- 0.56 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01684-A- 0.68 J, K BP 3 N, L, M, J, K .240 (6.10) -49470P01824-A- 0.82 J,

29、K BP 3 N, L, M, J, K .240 (6.10) -49470P01105-A- 1 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01105-A- 1 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01125-A- 1.2 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01125-A- 1.2 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01155-A- 1.5 J, K BP 3 N, L, M, J, K .48

30、0 (12.19) -49470X01155-A- 1.5 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01185-A- 1.8 J, K BP 3 N, L, M, J, K .480 (12.19) -49470X01185-A- 1.8 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01225-A- 2.2 J, K BP 3 N, L, M, J, K .650 (16.51) -49470P01225-A- 2.2 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X0

31、1225-A- 2.2 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01275-A- 2.7 J, K BP 1 N, L, M, J, K .360 (9.14) -49470P01275-A- 2.7 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X01275-A- 2.7 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01335-A- 3.3 J, K BP 1 N, L, M, J, K .480 (12.19) -49470P01335-A- 3.3 J, K BP

32、 2 A, B, D, C, F .360 (9.14) -49470X01335-A- 3.3 K, M BX 5 N, L, M, J, K .360 (9.14) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49470/1E

33、 6 TABLE I. Capacitor characteristics - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 50 V -49470P01395-A- 3.9 J, K BP 1 N, L, M, J, K .480 (12.19) -49470P01395-A- 3.9 J, K BP 2 A, B, D, C, F .360 (9.

34、14) -49470X01395-A- 3.9 K, M BX 5 N, L, M, J, K .480 (12.19) -49470P01475-A- 4.7 J, K BP 1 N, L, M, J, K .650 (16.51) -49470P01475-A- 4.7 J, K BP 2 A, B, D, C, F .480 (12.19) -49470X01475-A- 4.7 K, M BX 5 N, L, M, J, K .480 (12.19) -49470X01475-A- 4.7 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01565

35、A- 5.6 J, K BP 2 N, L, M, J, K .650 (16.51) -49470X01565-A- 5.6 K, M BX 5 N, L, M, J, K .650 (16.51) -49470X01565-A- 5.6 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01685-A- 6.8 J, K BP 6 N, L, M, J, K .360 (9.14) -49470X01685-A- 6.8 K, M BX 4 N, L, M, J, K .360 (9.14) -49470P01825-A- 8.2 J, K BP 6

36、N, L, M, J, K .360 (9.14) -49470X01825-A- 8.2 K, M BX 4 N, L, M, J, K .360 (9.14) -49470P01106-A- 10 J, K BP 6 N, L, M, J, K .480 (12.19) -49470X01106-A- 10 K, M BX 4 N, L, M, J, K .480 (12.19) -49470P01126-A- 12 J, K BP 6 N, L, M, J, K .480 (12.19) -49470X01126-A- 12 K, M BX 4 N, L, M, J, K .480 (1

37、2.19) -49470P01156-A- 15 J, K BP 6 N, L, M, J, K .650 (16.51) -49470X01156-A- 15 K, M BX 4 N, L, M, J, K .650 (16.51) -49470X01156-A- 15 K, M BX 3 A, B, D, C, F .240 (6.10) -49470X01186-A- 18 K, M BX 3 N, L, M, J, K .240 (6.10) -49470X01226-A- 22 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01276-A- 2

38、7 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01336-A- 33 K, M BX 3 N, L, M, J, K .360 (9.14) -49470X01396-A- 39 K, M BX 3 N, L, M, J, K .480 (12.19) -49470X01476-A- 47 K, M BX 3 N, L, M, J, K .650 (16.51) -49470X01476-A- 47 K, M BX 2 A, B, D, C, F .240 (6.10) -49470X01566-A- 56 K, M BX 1 N, L, M, J,

39、 K .360 (9.14) -49470X01566-A- 56 K, M BX 2 A, B, D, C, F .240 (6.10) -49470X01686-A- 68 K, M BX 1 N, L, M, J, K .480 (12.19) -49470X01686-A- 68 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X01826-A- 82 K, M BX 1 N, L, M, J, K .480 (12.19) -49470X01826-A- 82 K, M BX 2 A, B, D, C, F .360 (9.14) -49470X0

40、1107-A- 100 K, M BX 1 N, L, M, J, K .650 (16.51) -49470X01107-A- 100 K, M BX 2 A, B, D, C, F .480 (12.19) -49470X01127-A- 120 K, M BX 2 N, L, M, J, K .480 (12.19) -49470X01157-A- 150 K, M BX 2 N, L, M, J, K .650 (16.51) -49470X01187-A- 180 K, M BX 6 N, L, M, J, K .480 (12.19) -49470X01227-A- 220 K,

41、M BX 6 N, L, M, J, K .480 (12.19) -49470X01277-A- 270 K, M BX 6 N, L, M, J, K .650 (16.51) See footnote at end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49

42、470/1E 7 TABLE I. Capacitor characteristics - Continued. Part or Identifying Number (PIN) 1/ Capacitance F Capacitance tolerance Characteristic Case code Config. Maximum A dimension inch (mm) 100 V -49470P01473-B- 0.047 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01563-B- 0.056 J, K BP 5 N, L, M, J,

43、K .240 (6.10) -49470P01683-B- 0.068 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01823-B- 0.082 J, K BP 5 N, L, M, J, K .240 (6.10) -49470P01104-B- 0.1 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01124-B- 0.12 J, K BP 5 N, L, M, J, K .360 (9.14) -49470P01154-B- 0.15 J, K BP 5 N, L, M, J, K .480 (12.19)

44、 -49470P01154-B- 0.15 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01184-B- 0.18 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01184-B- 0.18 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01224-B- 0.22 J, K BP 5 N, L, M, J, K .650 (16.51) -49470P01224-B- 0.22 J, K BP 4 A, B, D, C, F .240 (6.10) -49470P01274

45、B- 0.27 J, K BP 4 N, L, M, J, K .360 (9.14) -49470P01334-B- 0.33 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01394-B- 0.39 J, K BP 4 N, L, M, J, K .480 (12.19) -49470P01474-B- 0.47 J, K BP 4 N, L, M, J, K .650 (16.51) -49470P01474-B- 0.47 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01564-B- 0.56 J,

46、K BP 4 N, L, M, J, K .650 (16.51) -49470P01564-B- 0.56 J, K BP 3 A, B, D, C, F .240 (6.10) -49470P01684-B- 0.68 J, K BP 3 N, L, M, J, K .240 (6.10) -49470X01684-B- 0.68 K, M BX 5 N, L, M, J, K .120 (3.05) -49470P01824-B- 0.82 J, K BP 3 N, L, M, J, K .120 (3.05) -49470X01824-B- 0.82 K, M BX 5 N, L, M

47、 J, K .240 (6.10) -49470P01105-B- 1 J, K BP 3 N, L, M, J, K .360 (9.14) -49470X01105-B- 1 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01125-B- 1.2 J, K BP 3 N, L, M, J, K .480 (12.19) -49470X01125-B- 1.2 K, M BX 5 N, L, M, J, K .240 (6.10) -49470P01155-B- 1.5 J, K BP 3 N, L, M, J, K .480 (12.19) -49

48、470X01155-B- 1.5 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01185-B- 1.8 J, K BP 3 N, L, M, J, K .650 (16.51) -49470P01185-B- 1.8 J, K BP 2 A, B, D, C, F .240 (6.10) -49470X01185-B- 1.8 K, M BX 5 N, L, M, J, K .360 (9.14) -49470P01225-B- 2.2 J, K BP 1 N, L, M, J, K .480 (12.19) -49470X01225-B- 2.2 K

49、 M BX 5 N, L, M, J, K .480 (12.19) -49470X01225-B- 2.2 K, M BX 4 A, B, D, C, F .240 (6.10) -49470P01275-B- 2.7 J, K BP 1 N, L, M, J, K .480 (12.19) -49470X01275-B- 2.7 K, M BX 5 N, L, M, J, K .480 (12.19) -49470P01335-B- 3.3 J, K BP 1 N, L, M, J, K .650 (16.51) -49470P01335-B- 3.3 J, K BP 2 A, B, D, C, F .480 (12.19) -49470X01335-B- 3.3 K, M BX 5 N, L, M, J, K .650 (16.51) -49

展开阅读全文
相关资源
猜你喜欢
  • BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf
  • BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf
  • BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf
  • BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf
  • BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf
  • BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf
  • BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf
  • BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf
  • BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ARMY

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1