ImageVerifierCode 换一换
格式:PDF , 页数:10 ,大小:179.38KB ,
资源ID:447495      下载积分:10000 积分
快捷下载
登录下载
邮箱/手机:
温馨提示:
如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
如填写123,账号就是123,密码也是123。
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝扫码支付 微信扫码支付   
注意:如需开发票,请勿充值!
验证码:   换一换

加入VIP,免费下载
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【http://www.mydoc123.com/d-447495.html】到电脑端继续下载(重复下载不扣费)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录  

下载须知

1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。
2: 试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
3: 文件的所有权益归上传用户所有。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 本站仅提供交流平台,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

版权提示 | 免责声明

本文(ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf)为本站会员(syndromehi216)主动上传,麦多课文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文库(发送邮件至master@mydoc123.com或直接QQ联系客服),我们立即给予删除!

ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf

1、 AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A Approved for public release, distribution is unlimited. MIL-PRF-55365/11C SUPERSEDING 26 January 2011 MIL-PRF-55365/11B 23 October 2006 PERFORMANCE SPECIFICATION SHEET CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY, NON-ESTABLISHED RE

2、LIABILITY AND HIGH RELIABILITY, STYLES CWR19 AND CWR29 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-55365. FIGURE 1. Style CWR19 and CWR

3、29 (molded) capacitors. INCH-POUND Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 2 Figure 2. Style CWR19 and CWR29 molded chip with glue pad. NOTE: At the opti

4、on of the manufacturer, this configuration with the glue pad between the solderable surfaces may be substituted. Case size L .015 (0.38) W .015 (0.38) H .015 (0.38) P +.010 (0.25) -.005 (0.13) W2H2min A .100 (2.54) .050 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) B .150 (3.81) .0

5、50 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) C .200 (5.08) .050 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) D .150 (3.81) .100 (2.54) .050 (1.27) .030 (0.76) .095+.005,-.010 (2.41+0.13, -0.25) .030 (0.76) E .200 (5.08) .100 (2.54) .050 (1.27) .030 (0.76) .09

6、5+.005,-.010 (2.41+0.13, -0.25) .030 (0.76) F .220 (5.59) .135 (3.43) .070 (1.78) .030 (0.76) .130.005 (3.300.13) .040 (1.02) G .265 (6.73) .110 (2.79) .110 (2.79) .050 (1.27) .105.005 (2.670.13) .060 (1.52) H .285 (7.24) .150 (3.81) .110 (2.79) .050 (1.27) .145+.005. -.020 (3.68+0.13, -0.51) .060 (

7、1.52) X .273 (6.93) .213 (5.41) .108 (2.74) .047 (1.19) .120 .005 (3.05 0.13) .048 (1.22) NOTES: 1. Dimensions are in inches. Metric (millimeter) equivalents are given in parenthesis for general information only. 2. These capacitors are designed for mounting by dip soldering, thermo-compression bond

8、ing, reflow soldering, or other conventional means. 3. The anode (+) terminal shall be identified by a marking on the case. 4. The termination width (W2) shall be maintained to the top of the solderable area. 5. Solderable surfaces are only those surfaces designated as such. Termination edges are no

9、t considered solderable. 6. When solder coated terminations are required, add an additional .015 inch (0.38 mm) to the above listed tolerances for “L”, “W”, “H”, “P”, “W2”, and H2for each case size. FIGURE 1 and 2. Style CWR19 and CWR29 (molded) capacitors - Continued. Copyright Communications - Ele

10、ctronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Termination finish: In accordance with termination finishes B, C, H, or K of MIL-PR

11、F-55365. DC rated voltage: See table I or table II. Above +85C, voltage derating is required (see MIL-PRF-55365). Operating temperature range: -55C to +125C. Product level designator: In accordance with MIL-PRF-55365. DC leakage (DCL): See table I or table II. Capacitance: See table I or table II. C

12、apacitance tolerance: 5 percent (J), 10 percent (K), or 20 percent (M). Dissipation factor (DF): See table I or table II. Equivalent series resistance (ESR) at 100 kHz: In accordance with MIL-PRF-55365 (see table I or table II). Resistance to soldering heat: In accordance with MIL-PRF-55365. * Stabi

13、lity at low and high temperatures: In accordance with MIL-PRF-55365. * Surge voltage: In accordance with MIL-PRF-55365. * Life: * 2,000 hours: In accordance with MIL-PRF-55365. * 10,000 hours: In accordance with MIL-PRF-55365. Solderability will be in accordance with MIL-PRF-55365 except that follow

14、ing steam aging test samples may have a 30 minute bake out at 150C prior to solder dipping. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 4 TABLE I. Style CWR1

15、9 characteristics. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR19C-335-A- 4 3.3 1 10 12 6 8 8 12 A CWR19C-475-A- 4 4.7 1 10 12 6 8 8 12 A CWR19C-685-A- 4 6.

16、8 1 10 12 6 8 8 12 A CWR19C-106-B- 4 10 1 10 12 8 10 10 8 B CWR19C-156-B- 4 15 1 10 12 8 10 10 8 B CWR19C-226-B- 4 22 1 10 12 8 10 10 8 B CWR19C-226-D- 4 22 1 10 12 8 10 12 4 D CWR19C-336-D- 4 33 2 20 24 8 10 12 4 D CWR19C-336-E- 4 33 2 20 24 8 10 12 3 E CWR19C-476-E- 4 47 2 20 24 8 10 12 3 E CWR19C

17、-686-E- 4 68 3 30 36 8 10 12 3 E CWR19C-107-F- 4 100 4 40 48 10 12 12 2 F CWR19C-157-G- 4 150 6 60 72 10 12 12 1 G CWR19C-227-H- 4 220 8 80 96 10 12 12 1 H CWR19C-337-H- 4 330 10 100 120 10 12 12 0.9 H CWR19D-335-A- 6 3.3 1 10 12 6 8 8 12 A CWR19D-475-A- 6 4.7 1 10 12 6 8 8 12 A CWR19D-685-B- 6 6.8

18、1 10 12 6 8 8 8 B CWR19D-106-B- 6 10 1 10 12 6 8 8 8 B CWR19D-156-B- 6 15 1 10 12 8 10 10 8 B CWR19D-156-D- 6 15 1 10 12 8 10 12 5 D CWR19D-156-E- 6 15 1 10 12 8 10 12 3 E CWR19D-226-D- 6 22 1 10 12 6 8 8 5 D CWR19D-226-E- 6 22 2 20 24 8 10 12 3.5 E CWR19D-336-E- 6 33 2 20 24 6 8 8 3.5 E CWR19D-476-

19、F- 6 47 3 30 36 8 10 12 3.5 F CWR19D-686-F- 6 68 4 40 48 10 12 12 1.5 F CWR19D-686-G- 6 68 4 40 48 10 12 12 1 G CWR19D-107-G- 6 100 6 60 72 10 12 12 1.1 G CWR19D-157-G- 6 150 10 100 120 10 12 12 1.1 G CWR19D-227-H- 6 220 10 100 120 10 12 12 0.9 H CWR19D-337-H- 6 330 20 200 240 10 12 12 0.9 H CWR19F-

20、225-A- 10 2.2 1 10 12 6 8 8 12 A CWR19F-335-A- 10 3.3 1 10 12 6 8 8 12 A CWR19F-475-B- 10 4.7 1 10 12 6 8 8 8 B CWR19F-475-C- 10 4.7 1 10 12 6 8 8 5.5 C CWR19F-685-B- 10 6.8 1 10 12 6 8 8 8 B CWR19F-685-C- 10 6.8 1 10 12 6 8 8 5.5 C CWR19F-685-D- 10 6.8 1 10 12 6 8 8 5 D CWR19F-106-B- 10 10 1 10 12

21、8 10 10 8 B CWR19F-106-C- 10 10 1 10 12 6 8 8 5.5 C CWR19F-106-D- 10 10 1 10 12 6 8 8 4 D CWR19F-106-E- 10 10 1 10 12 6 8 8 3.5 E CWR19F-156-D- 10 15 2 20 24 6 8 8 5 D CWR19F-156-E- 10 15 2 20 24 8 10 10 3 E CWR19F-226-E- 10 22 3 30 36 8 10 10 2 E CWR19F-336-F- 10 33 3 30 36 8 10 10 1.5 F CWR19F-476

22、-F- 10 47 4 40 48 10 12 12 1.5 F CWR19F-476-G- 10 47 4 40 48 10 12 12 1 G CWR19F-686-G- 10 68 6 60 72 10 12 12 1.1 G CWR19F-107-G- 10 100 10 100 120 10 12 12 1.1 G See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo

23、 reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 5 TABLE I. Style CWR19 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C

24、+25C +85C +125C -55C CWR19F-107-H- 10 100 10 100 120 10 12 12 0.9 H CWR19F-157-H- 10 150 15 150 180 10 12 12 0.9 H CWR19F-157-X- 10 150 15 150 180 10 12 12 0.9 X CWR19F-227-H- 10 220 20 200 240 10 12 12 0.9 H CWR19H-105-A- 15 1 1 10 12 6 8 8 15 A CWR19H-155-A- 15 1.5 1 10 12 6 8 8 15 A CWR19H-225-A-

25、 15 2.2 1 10 12 6 8 8 15 A CWR19H-335-B- 15 3.3 1 10 12 6 8 8 9 B CWR19H-475-B- 15 4.7 1 10 12 6 8 8 5 B CWR19H-475-C- 15 4.7 1 10 12 6 8 8 5.5 C CWR19H-475-D- 15 4.7 1 10 12 6 8 8 6 D CWR19H-685-D- 15 6.8 1 10 12 6 8 8 6 D CWR19H-685-E- 15 6.8 1 10 12 8 10 12 3 E CWR19H-106-D- 15 10 2 20 24 6 8 8 6

26、 D CWR19H-106-E- 15 10 2 20 24 6 8 8 4 E CWR19H-156-E- 15 15 2 20 24 6 8 8 4 E CWR19H-156-F- 15 15 2 20 24 8 10 10 3 F CWR19H-226-F- 15 22 3 30 36 8 10 10 3 F CWR19H-336-F- 15 33 5 50 60 6 8 8 3 F CWR19H-336-G- 15 33 6 60 72 8 10 10 1.1 G CWR19H-476-G- 15 47 10 100 120 8 10 10 1.1 G CWR19H-476-H- 15

27、 47 10 100 120 8 10 10 0.9 H CWR19H-686-G- 15 68 10 100 120 8 10 10 1.1 G CWR19H-686-H- 15 68 10 100 120 8 10 10 0.9 H CWR19H-107-H- 15 100 15 150 180 10 12 12 0.9 H CWR19J-684-A- 20 0.68 1 10 12 6 8 8 15 A CWR19J-105-A- 20 1 1 10 12 6 8 8 15 A CWR19J-155-B- 20 1.5 1 10 12 6 8 8 9 B CWR19J-225-B- 20

28、 2.2 1 10 12 6 8 8 9 B CWR19J-335-D- 20 3.3 1 10 12 6 8 8 6 D CWR19J-475-E- 20 4.7 1 10 12 6 8 8 6 E CWR19J-685-E- 20 6.8 2 20 24 6 8 8 5 E CWR19J-106-E- 20 10 2 20 24 6 8 8 5 E CWR19J-106-F- 20 10 2 20 24 6 8 8 3 F CWR19J-156-F- 20 15 3 30 36 6 8 8 3 F CWR19J-226-G- 20 22 4 40 48 6 8 8 2.5 G CWR19J

29、-336-H- 20 33 6 60 72 8 10 10 0.9 H CWR19J-476-H- 20 47 10 100 120 8 10 10 0.9 H CWR19J-476-X- 20 47 10 100 120 8 10 10 0.9 X CWR19K-474-A- 25 0.47 1 10 12 6 8 8 15 A CWR19K-105-B- 25 1 1 10 12 6 8 8 10 B CWR19K-225-D- 25 2.2 1 10 12 6 8 8 6 D CWR19K-335-E- 25 3.3 1 10 12 6 8 8 4 E CWR19K-685-F- 25

30、6.8 2 20 24 6 8 8 3 F CWR19K-156-G- 25 15 4 40 48 6 8 8 1.4 G CWR19K-226-G- 25 22 6 60 72 6 8 8 1.4 G CWR19K-226-H- 25 22 6 60 72 6 8 8 0.9 H CWR19K-226-X- 25 22 6 60 72 6 8 8 0.9 X CWR19K-336-H- 25 33 10 100 120 8 10 10 0.9 H CWR19K-336-X- 25 33 10 100 120 8 10 10 0.9 X See footnote at the end of t

31、able. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 6 TABLE I. Style CWR19 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC

32、 Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR19M-334-A- 35 0.33 1 10 12 6 8 8 22 A CWR19M-685-G- 35 6.8 3 30 36 6 8 8 1.5 G CWR19M-106-H- 35 10 4 40 48 8 10 10 0.9 H CWR19M-156-X- 35 15 6 60 72 6 8 8 0.9 X 1/ Comp

33、lete Part or Identifying Number (PIN) shall include additional symbols to indicate termination finish, capacitance tolerance, product level designator, and surge current option letter. If surge current is not required, the last dash shall be replaced with the letter Z. TABLE II. Style CWR29 characte

34、ristics. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR29C-225-A- 4 2.2 1 10 12 6 8 8 4 A CWR29C-335-A- 4 3.3 1 10 12 6 8 8 6 A CWR29C-475-A- 4 4.7 1 10 12 6

35、8 8 6 A CWR29C-475-B- 4 4.7 1 10 12 6 8 8 3.2 B CWR29C-685-A- 4 6.8 1 10 12 6 8 8 6 A CWR29C-685-C- 4 6.8 1 10 12 6 8 8 2.2 C CWR29C-106-B- 4 10 1 10 12 8 10 10 3.2 B CWR29C-106-D- 4 10 1 10 12 8 8 10 1.3 D CWR29C-156-B- 4 15 1 10 12 8 10 10 3.2 B CWR29C-156-E- 4 15 1 10 12 8 10 12 1 E CWR29C-226-B-

36、 4 22 1 10 12 8 10 10 3.2 B CWR29C-226-D- 4 22 1 10 12 8 10 12 1.3 D CWR29C-336-D- 4 33 2 20 24 8 10 12 1.3 D CWR29C-336-E- 4 33 2 20 24 8 10 12 0.9 E CWR29C-336-F- 4 33 2 20 24 8 10 12 0.6 F CWR29C-476-E- 4 47 2 20 24 8 10 12 0.9 E CWR29C-686-E- 4 68 3 30 36 8 10 12 0.9 E CWR29C-686-G- 4 68 3 30 36

37、 10 12 12 0.275 G CWR29C-107-F- 4 100 4 40 48 10 12 12 0.550 F CWR29C-107-H- 4 100 4 40 48 10 12 12 0.180 H CWR29C-157-G- 4 150 6 60 72 10 12 12 0.250 G CWR29C-227-H- 4 220 8 80 96 10 12 12 0.200 H CWR29C-337-H- 4 330 10 100 120 10 12 12 0.180 H CWR29D-155-A- 6 1.5 1 10 12 6 8 8 4 A CWR29D-335-A- 6

38、3.3 1 10 12 6 8 8 6 A CWR29D-335-B- 6 3.3 1 10 12 6 8 8 3.2 B CWR29D-475-A- 6 4.7 1 10 12 6 8 8 6 A CWR29D-475-C- 6 4.7 1 10 12 6 8 8 2.2 C CWR29D-685-B- 6 6.8 1 10 12 6 8 8 3.2 B CWR29D-685-D- 6 6.8 1 10 12 6 8 8 1.5 D CWR29D-106-B- 6 10 1 10 12 6 8 8 3.2 B CWR29D-106-E- 6 10 1 10 12 8 10 12 1 E CW

39、R29D-156-B- 6 15 1 10 12 8 10 10 3.2 B See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 7 TABLE II. Style CWR29 characteristics-

40、 Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR29D-156-D- 6 15 1 10 12 8 10 12 1.7 D CWR29D-156-E- 6 15 1 10 12 8 10 12 0.9 E CWR29D-226-D- 6 22 1

41、10 12 6 8 8 1.7 D CWR29D-226-E- 6 22 2 20 24 8 10 12 1 E CWR29D-226-F- 6 22 2 20 24 8 10 12 0.6 F CWR29D-336-E- 6 33 2 20 24 6 8 8 1 E CWR29D-476-F- 6 47 3 30 36 8 10 12 1 F CWR29D-476-G- 6 47 3 30 36 10 12 12 0.275 G CWR29D-686-F- 6 68 4 40 48 10 12 12 0.400 F CWR29D-686-G- 6 68 4 40 48 10 12 12 0.

42、25 G CWR29D-686-H- 6 68 4 40 48 10 12 12 0.180 H CWR29D-107-G- 6 100 6 60 72 10 12 12 0.275 G CWR29D-157-G- 6 150 10 100 120 10 12 12 0.275 G CWR29D-227-H- 6 220 10 100 120 10 12 12 0.180 H CWR29D-337-H- 6 330 20 200 240 10 12 12 0.18 H CWR29F-105-A- 10 1 1 10 12 6 8 8 5 A CWR29F-225-A- 10 2.2 1 10

43、12 6 8 8 6 A CWR29F-225-B- 10 2.2 1 10 12 6 8 8 3.2 B CWR29F-335-A- 10 3.3 1 10 12 6 8 8 6 A CWR29F-335-C- 10 3.3 1 10 12 6 8 8 2.2 C CWR29F-475-B- 10 4.7 1 10 12 6 8 8 3.2 B CWR29F-475-C- 10 4.7 1 10 12 6 8 8 2.2 C CWR29F-475-D- 10 4.7 1 10 12 6 8 8 1.5 D CWR29F-685-B- 10 6.8 1 10 12 6 8 8 3.2 B CW

44、R29F-685-C- 10 6.8 1 10 12 6 8 8 2.2 C CWR29F-685-D- 10 6.8 1 10 12 6 8 8 1.7 D CWR29F-685-E- 10 6.8 1 10 12 6 8 8 1 E CWR29F-106-B- 10 10 1 10 12 8 10 10 3.2 B CWR29F-106-C- 10 10 1 10 12 6 8 8 2.2 C CWR29F-106-D- 10 10 1 10 12 6 8 8 1.3 D CWR29F-106-E- 10 10 1 10 12 6 8 8 1 E CWR29F-156-D- 10 15 2

45、 20 24 6 8 8 1.7 D CWR29F-156-E- 10 15 2 20 24 8 10 10 0.9 E CWR29F-156-F- 10 15 2 20 24 8 8 10 0.7 F CWR29F-226-E- 10 22 3 30 36 8 10 10 0.6 E CWR29F-336-F- 10 33 3 30 36 8 10 10 0.4 F CWR29F-336-G- 10 33 3 30 36 10 12 12 0.275 G CWR29F-476-F- 10 47 4 40 48 10 12 12 0.4 F CWR29F-476-G- 10 47 4 40 4

46、8 10 12 12 0.25 G CWR29F-476-H- 10 47 5 50 60 10 12 12 0.180 H CWR29F-686-G- 10 68 6 60 72 10 12 12 0.275 G CWR29F-107-G- 10 100 10 100 120 10 12 12 0.275 G CWR29F-107-H- 10 100 10 100 120 10 12 12 0.180 H CWR29F-157-H- 10 150 15 150 180 10 12 12 0.180 H CWR29F-157-X- 10 150 15 150 180 10 12 12 0.06

47、5 X CWR29F-227-H- 10 220 20 200 240 10 12 12 0.180 H CWR29H-684-A- 15 0.68 1 10 12 6 8 8 6. A CWR29H-105-A- 15 1 1 10 12 6 8 8 7.5 A CWR29H-155-A- 15 1.5 1 10 12 6 8 8 7.5 A CWR29H-155-B- 15 1.5 1 10 12 6 8 8 3.2 B CWR29H-225-A- 15 2.2 1 10 12 6 8 8 7.5 A CWR29H-225-C- 15 2.2 1 10 12 6 8 8 2.2 C CWR

48、29H-335-B- 15 3.3 1 10 12 6 8 8 3.6 B CWR29H-335-D- 15 3.3 1 10 12 6 8 8 1.7 D See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 8 TABLE II. Style CWR29 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (ma

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1