ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf

上传人:syndromehi216 文档编号:447495 上传时间:2018-11-16 格式:PDF 页数:10 大小:179.38KB
下载 相关 举报
ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf_第1页
第1页 / 共10页
ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf_第2页
第2页 / 共10页
ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf_第3页
第3页 / 共10页
ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf_第4页
第4页 / 共10页
ARMY MIL-PRF-55365 11 C-2011 CAPACITORS CHIP FIXED TANTALUM POLARIZED ESTABLISHED RELIABILITY NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY STYLES CWR19 AND CWR29.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A Approved for public release, distribution is unlimited. MIL-PRF-55365/11C SUPERSEDING 26 January 2011 MIL-PRF-55365/11B 23 October 2006 PERFORMANCE SPECIFICATION SHEET CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY, NON-ESTABLISHED RE

2、LIABILITY AND HIGH RELIABILITY, STYLES CWR19 AND CWR29 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-55365. FIGURE 1. Style CWR19 and CWR

3、29 (molded) capacitors. INCH-POUND Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 2 Figure 2. Style CWR19 and CWR29 molded chip with glue pad. NOTE: At the opti

4、on of the manufacturer, this configuration with the glue pad between the solderable surfaces may be substituted. Case size L .015 (0.38) W .015 (0.38) H .015 (0.38) P +.010 (0.25) -.005 (0.13) W2H2min A .100 (2.54) .050 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) B .150 (3.81) .0

5、50 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) C .200 (5.08) .050 (1.27) .050 (1.27) .030 (0.76) .050 .005 (1.270.13) .030 (0.76) D .150 (3.81) .100 (2.54) .050 (1.27) .030 (0.76) .095+.005,-.010 (2.41+0.13, -0.25) .030 (0.76) E .200 (5.08) .100 (2.54) .050 (1.27) .030 (0.76) .09

6、5+.005,-.010 (2.41+0.13, -0.25) .030 (0.76) F .220 (5.59) .135 (3.43) .070 (1.78) .030 (0.76) .130.005 (3.300.13) .040 (1.02) G .265 (6.73) .110 (2.79) .110 (2.79) .050 (1.27) .105.005 (2.670.13) .060 (1.52) H .285 (7.24) .150 (3.81) .110 (2.79) .050 (1.27) .145+.005. -.020 (3.68+0.13, -0.51) .060 (

7、1.52) X .273 (6.93) .213 (5.41) .108 (2.74) .047 (1.19) .120 .005 (3.05 0.13) .048 (1.22) NOTES: 1. Dimensions are in inches. Metric (millimeter) equivalents are given in parenthesis for general information only. 2. These capacitors are designed for mounting by dip soldering, thermo-compression bond

8、ing, reflow soldering, or other conventional means. 3. The anode (+) terminal shall be identified by a marking on the case. 4. The termination width (W2) shall be maintained to the top of the solderable area. 5. Solderable surfaces are only those surfaces designated as such. Termination edges are no

9、t considered solderable. 6. When solder coated terminations are required, add an additional .015 inch (0.38 mm) to the above listed tolerances for “L”, “W”, “H”, “P”, “W2”, and H2for each case size. FIGURE 1 and 2. Style CWR19 and CWR29 (molded) capacitors - Continued. Copyright Communications - Ele

10、ctronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Termination finish: In accordance with termination finishes B, C, H, or K of MIL-PR

11、F-55365. DC rated voltage: See table I or table II. Above +85C, voltage derating is required (see MIL-PRF-55365). Operating temperature range: -55C to +125C. Product level designator: In accordance with MIL-PRF-55365. DC leakage (DCL): See table I or table II. Capacitance: See table I or table II. C

12、apacitance tolerance: 5 percent (J), 10 percent (K), or 20 percent (M). Dissipation factor (DF): See table I or table II. Equivalent series resistance (ESR) at 100 kHz: In accordance with MIL-PRF-55365 (see table I or table II). Resistance to soldering heat: In accordance with MIL-PRF-55365. * Stabi

13、lity at low and high temperatures: In accordance with MIL-PRF-55365. * Surge voltage: In accordance with MIL-PRF-55365. * Life: * 2,000 hours: In accordance with MIL-PRF-55365. * 10,000 hours: In accordance with MIL-PRF-55365. Solderability will be in accordance with MIL-PRF-55365 except that follow

14、ing steam aging test samples may have a 30 minute bake out at 150C prior to solder dipping. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 4 TABLE I. Style CWR1

15、9 characteristics. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR19C-335-A- 4 3.3 1 10 12 6 8 8 12 A CWR19C-475-A- 4 4.7 1 10 12 6 8 8 12 A CWR19C-685-A- 4 6.

16、8 1 10 12 6 8 8 12 A CWR19C-106-B- 4 10 1 10 12 8 10 10 8 B CWR19C-156-B- 4 15 1 10 12 8 10 10 8 B CWR19C-226-B- 4 22 1 10 12 8 10 10 8 B CWR19C-226-D- 4 22 1 10 12 8 10 12 4 D CWR19C-336-D- 4 33 2 20 24 8 10 12 4 D CWR19C-336-E- 4 33 2 20 24 8 10 12 3 E CWR19C-476-E- 4 47 2 20 24 8 10 12 3 E CWR19C

17、-686-E- 4 68 3 30 36 8 10 12 3 E CWR19C-107-F- 4 100 4 40 48 10 12 12 2 F CWR19C-157-G- 4 150 6 60 72 10 12 12 1 G CWR19C-227-H- 4 220 8 80 96 10 12 12 1 H CWR19C-337-H- 4 330 10 100 120 10 12 12 0.9 H CWR19D-335-A- 6 3.3 1 10 12 6 8 8 12 A CWR19D-475-A- 6 4.7 1 10 12 6 8 8 12 A CWR19D-685-B- 6 6.8

18、1 10 12 6 8 8 8 B CWR19D-106-B- 6 10 1 10 12 6 8 8 8 B CWR19D-156-B- 6 15 1 10 12 8 10 10 8 B CWR19D-156-D- 6 15 1 10 12 8 10 12 5 D CWR19D-156-E- 6 15 1 10 12 8 10 12 3 E CWR19D-226-D- 6 22 1 10 12 6 8 8 5 D CWR19D-226-E- 6 22 2 20 24 8 10 12 3.5 E CWR19D-336-E- 6 33 2 20 24 6 8 8 3.5 E CWR19D-476-

19、F- 6 47 3 30 36 8 10 12 3.5 F CWR19D-686-F- 6 68 4 40 48 10 12 12 1.5 F CWR19D-686-G- 6 68 4 40 48 10 12 12 1 G CWR19D-107-G- 6 100 6 60 72 10 12 12 1.1 G CWR19D-157-G- 6 150 10 100 120 10 12 12 1.1 G CWR19D-227-H- 6 220 10 100 120 10 12 12 0.9 H CWR19D-337-H- 6 330 20 200 240 10 12 12 0.9 H CWR19F-

20、225-A- 10 2.2 1 10 12 6 8 8 12 A CWR19F-335-A- 10 3.3 1 10 12 6 8 8 12 A CWR19F-475-B- 10 4.7 1 10 12 6 8 8 8 B CWR19F-475-C- 10 4.7 1 10 12 6 8 8 5.5 C CWR19F-685-B- 10 6.8 1 10 12 6 8 8 8 B CWR19F-685-C- 10 6.8 1 10 12 6 8 8 5.5 C CWR19F-685-D- 10 6.8 1 10 12 6 8 8 5 D CWR19F-106-B- 10 10 1 10 12

21、8 10 10 8 B CWR19F-106-C- 10 10 1 10 12 6 8 8 5.5 C CWR19F-106-D- 10 10 1 10 12 6 8 8 4 D CWR19F-106-E- 10 10 1 10 12 6 8 8 3.5 E CWR19F-156-D- 10 15 2 20 24 6 8 8 5 D CWR19F-156-E- 10 15 2 20 24 8 10 10 3 E CWR19F-226-E- 10 22 3 30 36 8 10 10 2 E CWR19F-336-F- 10 33 3 30 36 8 10 10 1.5 F CWR19F-476

22、-F- 10 47 4 40 48 10 12 12 1.5 F CWR19F-476-G- 10 47 4 40 48 10 12 12 1 G CWR19F-686-G- 10 68 6 60 72 10 12 12 1.1 G CWR19F-107-G- 10 100 10 100 120 10 12 12 1.1 G See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo

23、 reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 5 TABLE I. Style CWR19 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C

24、+25C +85C +125C -55C CWR19F-107-H- 10 100 10 100 120 10 12 12 0.9 H CWR19F-157-H- 10 150 15 150 180 10 12 12 0.9 H CWR19F-157-X- 10 150 15 150 180 10 12 12 0.9 X CWR19F-227-H- 10 220 20 200 240 10 12 12 0.9 H CWR19H-105-A- 15 1 1 10 12 6 8 8 15 A CWR19H-155-A- 15 1.5 1 10 12 6 8 8 15 A CWR19H-225-A-

25、 15 2.2 1 10 12 6 8 8 15 A CWR19H-335-B- 15 3.3 1 10 12 6 8 8 9 B CWR19H-475-B- 15 4.7 1 10 12 6 8 8 5 B CWR19H-475-C- 15 4.7 1 10 12 6 8 8 5.5 C CWR19H-475-D- 15 4.7 1 10 12 6 8 8 6 D CWR19H-685-D- 15 6.8 1 10 12 6 8 8 6 D CWR19H-685-E- 15 6.8 1 10 12 8 10 12 3 E CWR19H-106-D- 15 10 2 20 24 6 8 8 6

26、 D CWR19H-106-E- 15 10 2 20 24 6 8 8 4 E CWR19H-156-E- 15 15 2 20 24 6 8 8 4 E CWR19H-156-F- 15 15 2 20 24 8 10 10 3 F CWR19H-226-F- 15 22 3 30 36 8 10 10 3 F CWR19H-336-F- 15 33 5 50 60 6 8 8 3 F CWR19H-336-G- 15 33 6 60 72 8 10 10 1.1 G CWR19H-476-G- 15 47 10 100 120 8 10 10 1.1 G CWR19H-476-H- 15

27、 47 10 100 120 8 10 10 0.9 H CWR19H-686-G- 15 68 10 100 120 8 10 10 1.1 G CWR19H-686-H- 15 68 10 100 120 8 10 10 0.9 H CWR19H-107-H- 15 100 15 150 180 10 12 12 0.9 H CWR19J-684-A- 20 0.68 1 10 12 6 8 8 15 A CWR19J-105-A- 20 1 1 10 12 6 8 8 15 A CWR19J-155-B- 20 1.5 1 10 12 6 8 8 9 B CWR19J-225-B- 20

28、 2.2 1 10 12 6 8 8 9 B CWR19J-335-D- 20 3.3 1 10 12 6 8 8 6 D CWR19J-475-E- 20 4.7 1 10 12 6 8 8 6 E CWR19J-685-E- 20 6.8 2 20 24 6 8 8 5 E CWR19J-106-E- 20 10 2 20 24 6 8 8 5 E CWR19J-106-F- 20 10 2 20 24 6 8 8 3 F CWR19J-156-F- 20 15 3 30 36 6 8 8 3 F CWR19J-226-G- 20 22 4 40 48 6 8 8 2.5 G CWR19J

29、-336-H- 20 33 6 60 72 8 10 10 0.9 H CWR19J-476-H- 20 47 10 100 120 8 10 10 0.9 H CWR19J-476-X- 20 47 10 100 120 8 10 10 0.9 X CWR19K-474-A- 25 0.47 1 10 12 6 8 8 15 A CWR19K-105-B- 25 1 1 10 12 6 8 8 10 B CWR19K-225-D- 25 2.2 1 10 12 6 8 8 6 D CWR19K-335-E- 25 3.3 1 10 12 6 8 8 4 E CWR19K-685-F- 25

30、6.8 2 20 24 6 8 8 3 F CWR19K-156-G- 25 15 4 40 48 6 8 8 1.4 G CWR19K-226-G- 25 22 6 60 72 6 8 8 1.4 G CWR19K-226-H- 25 22 6 60 72 6 8 8 0.9 H CWR19K-226-X- 25 22 6 60 72 6 8 8 0.9 X CWR19K-336-H- 25 33 10 100 120 8 10 10 0.9 H CWR19K-336-X- 25 33 10 100 120 8 10 10 0.9 X See footnote at the end of t

31、able. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 6 TABLE I. Style CWR19 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC

32、 Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR19M-334-A- 35 0.33 1 10 12 6 8 8 22 A CWR19M-685-G- 35 6.8 3 30 36 6 8 8 1.5 G CWR19M-106-H- 35 10 4 40 48 8 10 10 0.9 H CWR19M-156-X- 35 15 6 60 72 6 8 8 0.9 X 1/ Comp

33、lete Part or Identifying Number (PIN) shall include additional symbols to indicate termination finish, capacitance tolerance, product level designator, and surge current option letter. If surge current is not required, the last dash shall be replaced with the letter Z. TABLE II. Style CWR29 characte

34、ristics. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR29C-225-A- 4 2.2 1 10 12 6 8 8 4 A CWR29C-335-A- 4 3.3 1 10 12 6 8 8 6 A CWR29C-475-A- 4 4.7 1 10 12 6

35、8 8 6 A CWR29C-475-B- 4 4.7 1 10 12 6 8 8 3.2 B CWR29C-685-A- 4 6.8 1 10 12 6 8 8 6 A CWR29C-685-C- 4 6.8 1 10 12 6 8 8 2.2 C CWR29C-106-B- 4 10 1 10 12 8 10 10 3.2 B CWR29C-106-D- 4 10 1 10 12 8 8 10 1.3 D CWR29C-156-B- 4 15 1 10 12 8 10 10 3.2 B CWR29C-156-E- 4 15 1 10 12 8 10 12 1 E CWR29C-226-B-

36、 4 22 1 10 12 8 10 10 3.2 B CWR29C-226-D- 4 22 1 10 12 8 10 12 1.3 D CWR29C-336-D- 4 33 2 20 24 8 10 12 1.3 D CWR29C-336-E- 4 33 2 20 24 8 10 12 0.9 E CWR29C-336-F- 4 33 2 20 24 8 10 12 0.6 F CWR29C-476-E- 4 47 2 20 24 8 10 12 0.9 E CWR29C-686-E- 4 68 3 30 36 8 10 12 0.9 E CWR29C-686-G- 4 68 3 30 36

37、 10 12 12 0.275 G CWR29C-107-F- 4 100 4 40 48 10 12 12 0.550 F CWR29C-107-H- 4 100 4 40 48 10 12 12 0.180 H CWR29C-157-G- 4 150 6 60 72 10 12 12 0.250 G CWR29C-227-H- 4 220 8 80 96 10 12 12 0.200 H CWR29C-337-H- 4 330 10 100 120 10 12 12 0.180 H CWR29D-155-A- 6 1.5 1 10 12 6 8 8 4 A CWR29D-335-A- 6

38、3.3 1 10 12 6 8 8 6 A CWR29D-335-B- 6 3.3 1 10 12 6 8 8 3.2 B CWR29D-475-A- 6 4.7 1 10 12 6 8 8 6 A CWR29D-475-C- 6 4.7 1 10 12 6 8 8 2.2 C CWR29D-685-B- 6 6.8 1 10 12 6 8 8 3.2 B CWR29D-685-D- 6 6.8 1 10 12 6 8 8 1.5 D CWR29D-106-B- 6 10 1 10 12 6 8 8 3.2 B CWR29D-106-E- 6 10 1 10 12 8 10 12 1 E CW

39、R29D-156-B- 6 15 1 10 12 8 10 10 3.2 B See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 7 TABLE II. Style CWR29 characteristics-

40、 Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (max) (A) Dissipation factor (max) (percent) Max ESR 100 kHz +25C (Ohms) Case size +25C +85C +125C +25C +85C +125C -55C CWR29D-156-D- 6 15 1 10 12 8 10 12 1.7 D CWR29D-156-E- 6 15 1 10 12 8 10 12 0.9 E CWR29D-226-D- 6 22 1

41、10 12 6 8 8 1.7 D CWR29D-226-E- 6 22 2 20 24 8 10 12 1 E CWR29D-226-F- 6 22 2 20 24 8 10 12 0.6 F CWR29D-336-E- 6 33 2 20 24 6 8 8 1 E CWR29D-476-F- 6 47 3 30 36 8 10 12 1 F CWR29D-476-G- 6 47 3 30 36 10 12 12 0.275 G CWR29D-686-F- 6 68 4 40 48 10 12 12 0.400 F CWR29D-686-G- 6 68 4 40 48 10 12 12 0.

42、25 G CWR29D-686-H- 6 68 4 40 48 10 12 12 0.180 H CWR29D-107-G- 6 100 6 60 72 10 12 12 0.275 G CWR29D-157-G- 6 150 10 100 120 10 12 12 0.275 G CWR29D-227-H- 6 220 10 100 120 10 12 12 0.180 H CWR29D-337-H- 6 330 20 200 240 10 12 12 0.18 H CWR29F-105-A- 10 1 1 10 12 6 8 8 5 A CWR29F-225-A- 10 2.2 1 10

43、12 6 8 8 6 A CWR29F-225-B- 10 2.2 1 10 12 6 8 8 3.2 B CWR29F-335-A- 10 3.3 1 10 12 6 8 8 6 A CWR29F-335-C- 10 3.3 1 10 12 6 8 8 2.2 C CWR29F-475-B- 10 4.7 1 10 12 6 8 8 3.2 B CWR29F-475-C- 10 4.7 1 10 12 6 8 8 2.2 C CWR29F-475-D- 10 4.7 1 10 12 6 8 8 1.5 D CWR29F-685-B- 10 6.8 1 10 12 6 8 8 3.2 B CW

44、R29F-685-C- 10 6.8 1 10 12 6 8 8 2.2 C CWR29F-685-D- 10 6.8 1 10 12 6 8 8 1.7 D CWR29F-685-E- 10 6.8 1 10 12 6 8 8 1 E CWR29F-106-B- 10 10 1 10 12 8 10 10 3.2 B CWR29F-106-C- 10 10 1 10 12 6 8 8 2.2 C CWR29F-106-D- 10 10 1 10 12 6 8 8 1.3 D CWR29F-106-E- 10 10 1 10 12 6 8 8 1 E CWR29F-156-D- 10 15 2

45、 20 24 6 8 8 1.7 D CWR29F-156-E- 10 15 2 20 24 8 10 10 0.9 E CWR29F-156-F- 10 15 2 20 24 8 8 10 0.7 F CWR29F-226-E- 10 22 3 30 36 8 10 10 0.6 E CWR29F-336-F- 10 33 3 30 36 8 10 10 0.4 F CWR29F-336-G- 10 33 3 30 36 10 12 12 0.275 G CWR29F-476-F- 10 47 4 40 48 10 12 12 0.4 F CWR29F-476-G- 10 47 4 40 4

46、8 10 12 12 0.25 G CWR29F-476-H- 10 47 5 50 60 10 12 12 0.180 H CWR29F-686-G- 10 68 6 60 72 10 12 12 0.275 G CWR29F-107-G- 10 100 10 100 120 10 12 12 0.275 G CWR29F-107-H- 10 100 10 100 120 10 12 12 0.180 H CWR29F-157-H- 10 150 15 150 180 10 12 12 0.180 H CWR29F-157-X- 10 150 15 150 180 10 12 12 0.06

47、5 X CWR29F-227-H- 10 220 20 200 240 10 12 12 0.180 H CWR29H-684-A- 15 0.68 1 10 12 6 8 8 6. A CWR29H-105-A- 15 1 1 10 12 6 8 8 7.5 A CWR29H-155-A- 15 1.5 1 10 12 6 8 8 7.5 A CWR29H-155-B- 15 1.5 1 10 12 6 8 8 3.2 B CWR29H-225-A- 15 2.2 1 10 12 6 8 8 7.5 A CWR29H-225-C- 15 2.2 1 10 12 6 8 8 2.2 C CWR

48、29H-335-B- 15 3.3 1 10 12 6 8 8 3.6 B CWR29H-335-D- 15 3.3 1 10 12 6 8 8 1.7 D See footnote at the end of table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55365/11C 8 TABLE II. Style CWR29 characteristics- Continued. PIN 1/ DC rated voltage (+85C) (Volts) Cap. (nom) (F) DC Leakage (ma

展开阅读全文
相关资源
猜你喜欢
  • STAS SR EN 29946-1996 Manipulating industrial robots - Presentation of characteristics《操纵工业机器人.特点表示 》.pdf STAS SR EN 29946-1996 Manipulating industrial robots - Presentation of characteristics《操纵工业机器人.特点表示 》.pdf
  • STAS SR EN 30012-1 C1-1996 Quality assurance requirements for measuring equipment Part 1  Metrotogical confirmation system for measuring equipment《测量设备质量保证要求.第1部分:测量设备的计量确认系统》.pdf STAS SR EN 30012-1 C1-1996 Quality assurance requirements for measuring equipment Part 1 Metrotogical confirmation system for measuring equipment《测量设备质量保证要求.第1部分:测量设备的计量确认系统》.pdf
  • STAS SR EN 30012-1-1995 Quality assurance requirements for measuring equipment Part 1  Metrological confirmation system for measuring equipment《测量设备的质量保证要求.第1部分:测量设备的计量确认系统》.pdf STAS SR EN 30012-1-1995 Quality assurance requirements for measuring equipment Part 1 Metrological confirmation system for measuring equipment《测量设备的质量保证要求.第1部分:测量设备的计量确认系统》.pdf
  • STAS SR EN 30042-1996 Are-welded joinls in aiuminium and its weldable alloys Guidance on quality levels for imperfections《铝及其可焊合金弧焊接缝.不合格质量水平指导》.pdf STAS SR EN 30042-1996 Are-welded joinls in aiuminium and its weldable alloys Guidance on quality levels for imperfections《铝及其可焊合金弧焊接缝.不合格质量水平指导》.pdf
  • STAS SR EN 3042-1995 Aerospace series Quality assurance EN aerospace products Qualification procedure《航空航天系列.质量保证.EN航天产品.资格认证程序》.pdf STAS SR EN 3042-1995 Aerospace series Quality assurance EN aerospace products Qualification procedure《航空航天系列.质量保证.EN航天产品.资格认证程序》.pdf
  • STAS SR EN 30993-1-1996 Biological evaluation of medical devices -Part 1  Guidance on selection of tests《医疗设备的生物学评价.第1部分:测试选择的指导》.pdf STAS SR EN 30993-1-1996 Biological evaluation of medical devices -Part 1 Guidance on selection of tests《医疗设备的生物学评价.第1部分:测试选择的指导》.pdf
  • STAS SR EN 30993-3-1996 Biological evaluation of medical devices - Part 3  Tests for genotoxicity carcinogenity and reproductive toxicity《医疗器械生物学评价.第3部分:遗传毒性、致癌性和生殖毒性试验》.pdf STAS SR EN 30993-3-1996 Biological evaluation of medical devices - Part 3 Tests for genotoxicity carcinogenity and reproductive toxicity《医疗器械生物学评价.第3部分:遗传毒性、致癌性和生殖毒性试验》.pdf
  • STAS SR EN 30993-5-1996 Biological evaluation of medical devices -Part 5  Tests for cytotoxicity  in vitro methods《医疗设备的生物学评价.第5部分:细胞毒性试验:在体外培养的方法 》.pdf STAS SR EN 30993-5-1996 Biological evaluation of medical devices -Part 5 Tests for cytotoxicity in vitro methods《医疗设备的生物学评价.第5部分:细胞毒性试验:在体外培养的方法 》.pdf
  • STAS SR EN 45001-1993 Generai criteria for the operation of testing iaboratories《测试实验室运营的通用标准 》.pdf STAS SR EN 45001-1993 Generai criteria for the operation of testing iaboratories《测试实验室运营的通用标准 》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ARMY

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1