ARMY MIL-S-11459-1951 SPARE PARTS DATA (TRANSPORTATION CORPS EQUIPMENT)《备件数据(运输总队装备)》.pdf

1、MIL-S-11457 MI 77779Ob 0377385 b - “15 - O5 MIL-S-11459( TC) 20 September 1951 . UNCOORDINATED MILITARY SPECIFICATION SPARE PARTS DATA (TRANSPORTATION CORPS EQUIPMENT) 1. SCOPE 1.1 Scope. - This specification covers the preparation and submission of data for spare parts, special tools, and accessori

2、es required for the operational maintenance of TC equipment. 1.2 Classification. - Spare parts data shall include the following, as Type I - Spare parts, accessories, and special tools required for normal Type II - A list of all service parts, including spare parts required to specified (see 6.1): o

3、peration and maintenance of an item by operating personnel. maintain an item for 1 year. 2. APPLICABLE SPECIFICATIONS, STANDARDS, DRAWINGS, AND PUBLICATIONS (not applicable). 3. REQUIREMENTS 3.1 Breakdown. - Equipment components shall be divided into groups to facilitate the use of the data. Each gr

4、op shall be subdivided into assemblies and subassemblies, and each in turn shall list the detailed parts. All such data shall be in tabular form and shall be arranged logically for each major item of equipment. 3.2 Assemblies. - In these cases where the manufacturer recommends compIete replacement o

5、f an assembly, due to low monetary value, or the need of highly specialized jigs, tools, or personnel to repair or replace in part, the assembly shall be considered a single item and no parts data shall be included. 3.3 Rcquircd copicu. - Unless otherwise specified (sec 6. i), four clcar, legible co

6、pies of all data. shall be submitted, of which at least cne shall be a reproducible copy. 3.4 Unit cost. - The current unit cost, and effective year of unit cost, shall be indicated for each group, assembly, subasscmbly, accessory, tool, and spare part. 1. Provided by IHSNot for ResaleNo reproductio

7、n or networking permitted without license from IHS-,-,-NIL-S-LLLI57 NI = 7777706 0377386 MIL-S-11469( TC) .- 3.5 Recommendation of required parts: Type I data.- Recommendation of the number of parts, accessories, and tools required for type I data shall represent those items to be initially issued w

8、ith the equipment: a. Items required for the normal operation and maintenance of the b. High-mortality spare parts that may be replaced by the operator C. Spare parts required aboard ship by regulations of The American Type II data. - Recommendations of the number of accessories, assemblies, and sub

9、assemblies, and spare parts therefor, for type II data, shall represent those items required for 1 years maintenance of the major item of equipment, and a list of all service parts. 3.6 Type I data: Type I data shall include all high mortality spare parts, accessorbw, and tools required for normal o

10、peratiozal maintenance of the specified equipment, and shall be limited h a normal 604ay requirement. Marked-up publications of a manufacturer will be acceptable if the required data are shown. The following are required for type I data: equipment. of the equipment. Bureau of Shipping. I a. Complete

11、 description of the end item including the manufacturers b. Prime manufacturers name and part or drawing number. C. Complete description of each part. d. Quantity contained in unit, or required aboard ship by The American Bureau of Shipping, e. Current cost of the part, and year effective, f. Quanti

12、ty recommended for operational rnSntenance for GO clays. g. Remarks name and model number. 3.7 Type II data: Type II data shall include alt parts, components, special tools, and accessories comprising the complete unit of equipment. Listing shall be adequately illustrated by line drawings, exploded

13、views, or photographs, and shall include notes covering parts not furnished separately, assemblies only furnished, substitutes available, etc. Marked-up publications of a manufacturer will be acceptable if the required data are shown. The following are required for type II dab: . a. Manufacturers na

14、me, model, and serial number. b. Technical and performance data (number of cylinders, bore, C. Prime manufacturers name and part or drawing number, d, Complete description of each part. e. Quantity included in the unit. f, Current cost of part, and year effective. g. Quantity recommended for 1-year

15、maintenance of one unit. stroke, hp. I current characteristics, capacity, etc., as applicable), - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 -MIL-S-IL VI m 7777706 0377387 T m 1 MIL-S-11459( TC) h. Usage factor (for parts, assemblies, subassem

16、blies, not required in g. above, usage factor 1.00 indicates one item per year wiil be replaced for each unit in service, while a factor of. 10 inlcates that for every 10 units in service one item will require i. Cross reference from .prime manufacturers part number to assemblers part number (as app

17、licable). replacement each year). and the fact that the Governmefit may hase formulated, fuinished, or in any way supplied the said drawings, specifications, or other data is not to be regarded by implication or otherwise as in any manner licensing the holder or any other person or corporation, or c

18、onveying any rights or permission to manufacture, use, or sell any patented invention that xfay in anyway be related thereto. 6.4 Arrangements should be made to obtain machinery and equipment lists Notice. - Wnen Government drawings, specifications, or other data are used . .3 .- -. -. .* I. z - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-