1、1 w MIL-S-52339E 32 7797906 025LLi74 b - b 4 MIL-S-52339E(ME) 23 August 1984 SUPERSEDING MIL-S-5 2339D (ME) 6 March 1975 Beneficial comments (recommendations, additions, deletions) and any pertinent Belvoir Research and Development Center, ATTN: STRBE-RS, Fort Belvoir, VA 22060 data which may be of
2、use in improving this document should be addressed to: I MILITARY SPECIFICATION SHOP EQUIPMENT, WOODWORKING TRAILER MOUNTED This specification is approved for use by the USA Belvoir Research and Development Center, Department of the Army, and is available for use by all Departments and Agencies of t
3、he Department of Defense. 1. SCOPE 1.1 Scope. This specification covers woodworking equipment mounted on a i- 1 / 2- ton trai ler. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. Unless otherwise specified (see 6,2), the following specifications and standards of
4、 the issue listed in that issue of the Department of Defense Index of Specif icat ions and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent spec if ied here in. SPEC IF ICAT IONS FEDERAL QQ-S- 78 1 UU-T-8 1 DDD-A-1466 GGG-S-58 PPP-B-6Ql PPP-B-621 PPP-
5、B-640 PPP-H-1581 PPP-P-40 - Strapping, Steel, and Seals. - Tags, Shipping and Stock. - Aprons, Construction Workers. - Saws, Radial-Overarm, Woodworking. - Boxes, Wood, Cleated-Plywood. - Boxes, Wood, Nailed and Lock-Corner, - Box, Fiberboard, Corrugated, Triple Wall. - Hardware (Fasteners and Relat
6、ed Items), Packaging and Packing for Shipment and Storage of. - Packaging and Packing of Hand Tools. e FSC 3220 THIS DOCUMENT CONTAINS -q- PAGES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- ., PPP-T-60 PPP-T-9 7 MIL I TARY MIL-P-116 MIL-B- 12 1 M
7、IL-T-704 MIL-T-10579 MIL-V-13811 MIL=M-18058 MIL-G-2024 1 MIL-P-23377 MIL-G-28554 MIL-G-52732/ 11 MIL-G-52889/ 2 MIL-S-81733 STANDARDS FEDERAL FED-STD-H28 MILITARY MIL-STD- 12 9 MIL-STD-130 MIL-STD-281 MIL-STD-731 MIL-STD-781 MIL-STD-889 MIL-STD-1186 MIL-STD-1474 - Tape: Packaging, Waterproof. - Tap
8、e, Pressure-Sensitive Adhesive, Filament Reinforced. - Preservation, Methods of. - Barrier Material, Greaseproofed, Waterproofed, Flexible. - Treatment and Painting of Materiel. - Trailer, Cargo 2 Wheel, 1/4 Ton to 1-1/2 Ton. - Varnish, Waterproofing, Electiical, Ignition. - Machinery, Metal and Woo
9、dworking, Support Equipment and Associated Repair Parts, Preparation for Delivery of. Gasket Material, Wool Felt: Impregnated Adhesive Pressure-Sensitive . Primer Coating, Epoxy Polyamide, Chemical and Solvent Resistant. Generator Sets, Mobile Electric Power; Packaging of. Generator Set, Gasoline En
10、gine Driven 10 KW, 60 Hertz, Type 1, Class 2. Generator Set, Diesel Engine Driven, 10 Kw, 60 Hertz, Tactical, Utility. Sealing and Coating Compound, Corrosion Inhibitive. Screw-Thread Standards for Federal Services. Marking for Shipment and Storage. Identification Marking of US Military Property. Au
11、tomobiles, Trucks, Truck-Tractors, Trailers and Trailer Dollies; Preservation and Packaging of. Quality of Wood Members for Containers and Pallets. Reliability Tests: Exponential Distribution. Dissimilar Metals. Cushioning, Anchoring, Bracing, Blocking, and Waterproofing; with Appropriate Test Metho
12、ds . Noise Limits for Amy Materiel. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-S-52339E 32 7979906 0253496 T m! 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publica
13、tions form a part of this specification to the extent specified herein, DRAWINGS TA1 3 21 9E4 1 O0 - Shop Equipment, Woodworking, Trailer-Mounted. ME - designates U.S. Army Belvoir R Construction and Industrial. (Application for copies should be addressed to the U. S. Department of Commerce, Superin
14、tendent of Documents, Government Printing Office, Washington, DC 20402.) (Copies of specifications, standards, and drawings required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.) 2,2 Othe-
15、r publications. The following document($) form a part of this specification to the extent specified herein. The issues of the documents which are indicated as DoD adopted shall be the issue listed in the current DoDISS and the supplement thereto, if applicable. AMERICAN NATIONAL STANDARDS INSTITUTE
16、(ANSI) ANSI/HPMA - HP-1983, American National Standard for Hardwood and Decorative Plywood (Application for copies should be addressed to the American National Standards Institute, 1430 Broadway, New York, NY 10018.) (Industry association specifications and standards are generally available for refe
17、rence from libraries. using Federal agencies. ) They are also distributed among technical groups and 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-52339E (ME) 2.3 Order of precedence. In the event of a conflict between the text of this spec
18、ification and the references cited herein, the text of this specification shall take precedence. I 3.3 Reliability. Ihe specified mean-time-between-failure shall be 75 hours when tested as specified in 4.5.2.5. 3 e REQUIREMENTS 3.3.1 Maintainability. The availability shall be not less than 95 percen
19、t l and the maintenance ratio shall be not greater than 0.12. 3.1 Description. The shop equipment shall conform to TA13219E4100 and be mounted on a 1-1/2-ton military M104 of M105 series trailer modified with a hydraulic tailgate as indicated in TA13219E4100, and shall include equipment- mounting de
20、vices as specified herein (equipment and trailer hereinafter called “shop“). The shop shall be fitted with all items specified in set components list as compiled from SC 3220-97-CL-E01 (see 6.7) and as specified herein. generator set will be loaned to the contractor by the Government for first artic
21、le model fabrication and testing (see 6.8). on the trailer as indicated on TA13219E4100. One The equipment shall be mounted 3.1.1. Drawings. The drawings forming a part of this specification are end No deviation from the prescribed dimensions or tolerances is product drawings. permissible without pr
22、ior approval of the contracting officer. Where tolerances could cumulatively result in incorrect fits, the contractor shall provide toler- ances within those prescribed on the drawings to insure correct fit, assembly, and operation of the shop. Any data (e.g., shop drawings, layouts, flow sheets, pr
23、ocessing procedures, etc.) prepared by the contractor or obtained from a vendor to support fabrication and manufacture of the production item shall be made available, upon request, for inspection by the contracting officer or his designated representative. 3.2 First article. Unless otherwise specifi
24、ed the contractor shall furnish one shop for examination and testing within the time frame specified (see 6.2) to prove prior to starting production that his shops comply with the require- ments of this specification. section 4; and, unless otherwise specified herein, all examinations and tests shal
25、l be conducted by the contractor subject to surveillance and approval by the Government (see 6.3). When specified (see 6.21, the Government will conduct any or all of the first article examination and tests, as specified (see 6.2). Examination and tests shall be as specified in 3.4 Material. Materia
26、l shall be as specified herein and on the drawings. Material not specified shall meet the following. 3.4.1 Material deterioration and control. The shop shall be fabricated from compatible materials, inherently corrosion resistant or treated to be resistant to the various forms of corrosion and deter
27、ioration that may be encountered in any of the applicable storage and operating environment to which the shop may be exposed 4 I . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-5 2 3 393 (ME ) 3.4.1.1 Dissimilar metals. Dissimilar metals as d
28、efined in MIL-STD-889 shall be electrically insulated from one another to minimize or prevent galvanic corrosion. primer conforming to MIL-P-23377, or corrosion inhibiting sealant conforming to MIL-S-81733 or chromate tape conforming to MIL-G-20241. Insulation may be provided by a barrier such as a
29、coat of epoxy 3.4.1.2 Identification of materials and finishes. The contractor shall identify the specific material, material finish or treatment for use with components or sub-components, and shall make information available, upon request, to the contracting officer or designated representative. 3.
30、5 Roadability. When loaded with the tools and equipment specified herein, the shop shall withstand towing on paved roads, unimproved roads, and cross-country trails. The towing shall include abrupt stops and sharp turns. During or following the towing, there shall be no damage to or displacement of
31、any component, accessory part, or tool installed in or on the shop; and there shall be no evidence of defective welded, bolted, or riveted connections on the shop. required by 4.5.2.5. The road mileage will be sufficient to satisfy the total test time as 3.6 Trailer modification. The Government-furn
32、ished 1-1/2-ton M104 or M105 series trailer (see 3.14) shall be modified by removing existing tailgate and brackets, installing a tailgate, toolboxes, saw holddowns and slides for saw in accordance with TA13219E4100. The rear support legs shall be installed as shown on Drawing F8681929 except that t
33、wo legs shall be installed, one at each rear corner 3.7 Operation. The radial saw shall be connected to the generator set so that the saw may be operated throughout the range of the tailgate positions. The tool installation shall be within the design limits of the tailgate and support legs. When ope
34、rated as specified in 4.5.2.3 and 4.5.2.4, the saw dust curtain installation shall prevent discharge of sawdust into the trailer, and there shall be no evidence of permanent deformation or damage. 3.8 Lubrication. means for lubricating. All surfaces requiring lubrication shall be provided with a 3.9
35、 Identification marking. The shop shall be identified in accordance with M IL-STD-13 O 3.10 Treatment and painting. The portions of the shop which have been fabricated by the contractor or reworked shall be cleaned, treated, and painted in accordance with MIL-T-704, type A. 3.11 Safety. All rotating
36、 or reciprocating parts and other parts subject to high operational temperatures that are of such a nature or are so located as to be a hazard to operating personnel, shall be guarded or insulated to the extent necessary to eliminate the hazard. Guards and other protective devices shall be prodded f
37、or the operatorb) of the shop tools but shall not impair the operating function. 3.12 Env%nmental. from -25“ F to +120 F. The shop shall start and operate at temperatures ranging The shop shall not be damaged and its operation not 5 Provided by IHSNot for ResaleNo reproduction or networking permitte
38、d without license from IHS-,-,-MIL-S-52339E (ME impaired when stored at an ambient temperature of *155O F for 4 hours and at -50 F for a continuous period of 6 hours. damage, malfunction or irregular operation when subjected to extreme conditione of rain, wind and humidity. The shop shall show no ev
39、idence of 3.13 Noise. The noise level of the shop shall be in accordance with MIL-STD-1474, for steady state noise when tested in accordance with 4.5.2.6.1. (Aural nondetectability and impulse noise do not apply). The precautions of MIL-STD-1474 (see 6.12) shall be provided if the sound level exceed
40、s 85dB(A) when tested in accordance with 4.5.2.6.2. supplied with the shop. Hazard signs, when required, shall state “CAUTION, HEARING PROTECTION REQUIRED WITHIN FEET“, giving the safe distance. Sign posting and lettering shall be in accordance with MIL-STD-1474, 4.3. Hearing protectors shall not be
41、 3.14 Government-furnished property. nless otherwise specified (see 6.2) the following property in the quantities indicated will be furnished by the Government (see 6.6) for incorporation into the set: Quant i ty for each Item No. Description Identification shop 1. 2. 3. Trailer, Cargo MlO4 or MIL-T
42、-10579 1 Installation Kit, Support DWG F8681929 2 hg *Generator, Set (MAP only). MIL-G-52732111 or 1 M105, 1-112 Ton, 2 Wheel. MIL-G-52889 12 *For MAP Procurements only. 3.15 Government-loaned property. nless otherwise specified (see 6.2) the following property in the quantities indicated will be lo
43、aned by the government (see 6.8). Item No. Description Ident if ica t ion Quantity 1. Generator Set: GED or MIL-G-52732 111 1 Generator Set DED MIL-G-5 28 8 9 1 2 3.16 Workmanship. The shop shall be free from defects such as incomplete welds, rust, cracks, or any other defect that could impair its o
44、peration or serviceability. All screw threads shall be in accordance with FED-STD-H28. 4e QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. nless otherwise specified il the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as s
45、pecified herein. Except as otherwise 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-52339E 32 I 9999906 0253500 8 W MIL-S-52339E (ME) specified in the contract or purchase order, the contractor may use his own or any other facilities suitabl
46、e for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to presc
47、ribed requirements. o 4.1.1 Component and material inspection. The contractor is responsible for insuring that components and materials used are manufactured, examined, and tested in accordance with referenced specifications and standards. 4.1.2 Disassembly inspection. Failure of any test by the fir
48、st article model shall be cause for disassembly, in the presence of a Government representative, of the first article model to the extent necessary to determine the cause of the failure. Each disassembled part shall be examined in detail for compliance with the specification and referenced drawings
49、in regard to materials, dimensions, tolerances and workmanship. Parts not complying with such requirements shall be rejected. 4.2 Classification of inspections. Inspections shall be classified as follows : a. b. C. Inspection comparison (see 4.6). d. First article inspection (see 4.3). Quality conformance inspection (see 4.4). Inspection of packaging (see 4.7). 4.3 First article inspection. 4.3.1 First article examination. Examine the shop as speci
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1