ARMY MIL-S-62080 D-1991 SEMITRAILERS TANK POTABLE WATER 2 000 TO 5 500 GALLON COMMERCIAL《商用水箱可装2 000至5500加仑纯净水的半拖车》.pdf

1、MIL-S-62080D 23 E 9999906 0492383 7 E I NOT MEASUREMENT SENSITIVE 1 1 MI L-S-62030il 1 Oc.tnber i9 91 SUPERSEDZNG MIL-C-62080C 28 October 1987 MILITARY SPECIFICATION SEMITRAILERS, TANK: WiTAFJLE WATER, 2,000 TO 5,500 GALLON, COMMERCIAL This specification is approved for use by ail departments and ag

2、encies of the Department of Defense. 1. SCOPE 1.1 Scow. This specification covers 2,000 to 5,500 gallon, single and tandem axle, tank type semitrailers for transporting potable water. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified

3、 in acquisition documents. .I 1 - 2 l2aaa.f ication - 1-2-1 Sizes. The semitrailer shall be one of the following sizes, as specified (see 6.2): Size 2 - 2,000 gallon tank Size 3 - 3,000 gallon tank Size 4 - 4,000 gallon tank Size 5 - 5,500 gallon tank- 1.2.2 Stvle. The semitrailer shall be one of th

4、e following styles, a3 specified (see 6.2): Style A - Gravitv discharge Style B - Forced discharge. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Command, ATTN: AMSTA-W

5、ED, Warren, MI 48397-5000, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. 1 FSC-2330 I AMSC N/A 1- un1 imi ted. Approved for public release; distribution is Provided by IHSNot for ResaleNo reproduction or n

6、etworking permitted without license from IHS-,-,-1 NIL-S-62080D 23 M 99999Ob 0492384 9 - MIL-S-62080D 2. APPLICABM DOCUMENT5 2.1 GoverrJtgent doc-. *. 0 2.1.1 SPeclfications. steds . The following spcifications, standards and handbooks form a part of this document to the extent specified herein. Unl

7、ess otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) , and supplement thereto, cited in solicitation (see 6.2)- the SPECIFICATIONS FEDERAL * FI-B- 13 1 - Battery Storage: Vehicular, Ignition,

8、Lighting and Starting, MILITARY * MIL-P-514 - Plates, Identification, Instruction ant Marking, Blank. STANDARDS FEDERAL * FED-STD-297 - Rustproofing of Commercial (Nontactical) Vehicles. MILITARY MIL-STD-1223 - Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and Data Plate S

9、tandards- * MIL-STD-1474 - Noise Limits for Army Materiel. MS 75021 - Connector, Receptacle, Electrical: 12- Contact, Intervehicular, 28-Volt, Waterproof. * (Unless otherwise indicated, copies of ederal and military specifications, standards, and handbooks are available from the Naval Publications a

10、nd Forms Centek, Military Specif ications and Standards, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) * 2.1.2 2ts. Washington, D.C. 20402.) * 2.2 Bon Gover- Rubljcations . The following documents form a part of this document to the extent specified herein. the issues of the documents

11、which are DoD adopted are those listed in the issue of the WDISS cited in the solicitation. the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6-2)- Unless otherwise specified, Unless otherwise specified, AMERICAN NATIONAL STANDARD INSTITU

12、TE, INC- (ANSI) American National Standard Pipe Thread Series- (Application for copies of ANSI publications should be addressed to the American National Standard Institute, 1430 Broadway, New York, NY 10018.) * THE EUROPEIN TYRE AND RIM TECHNICAL ORGANISATION (ETRTO) Standards Manual (Application fo

13、r copies of the ETRTO publications should be addressed to the European Tyre and Rim Technical Organisation, 32, Avenue Brugmam, 1060 Brussels, Belgium,) CAE, INC, 5318 SAE Standards and Recommended Practices - Air Brake Gladhand Service (Control) and Emergency (Supply) Line Couplers - Trucks, Truck-

14、Tractors, and Trailers (WD adopted). Measurement of Electromagnetic Radiation from Vehicles and Devices (30-1000 MHz). - Seven-Conductor Electrical Connector for . Truck-Trailer Jumper Cable. - Rear Wheel Splash and Stone Throw Protection (DOD adopted). * 555 1 - Performance Levels and Methods of J5

15、60 5682 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I 1 MIL-S-62080D 23 9999906 0492386 2 5700 5702 Ji292 MIL-S-62080D - Fifth Wheel Kingpin - Commercial Trailers and Semitrailers (DOD adopted). - Brake and Electrical Connection Locations - Tru

16、ck-Tractor and Trailer (WD adopted). - Automobile, Truck, Truck-Tractor, Trailer and Motor Coach Wiring. (Application for copies of SAE publications should be addressed to SAE, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) * THE TIRE AND RIM ASSOCIATION, INC. Year Book. (Application for copie

17、s of Tire and Rim Association publications should be addressed to The Tire and Rim Association, Inc., 175 Montrose West Ave., Copley, OH 44321.) % from the organizations that prepare or distribute the documents. documents also may be available in or through libraries or other informational services,

18、) (Non-Government standards and other publications are normally available These X 2.3 Order of mecedenm. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence, Nothing in this document, however, supersedes applic

19、able laws and regulations unless a specific exemption has been obtained, 3. REQUIREMENTS 3.1 wrecial requimnenh . In addition to the standard vehicle and components specified in 3-1, the vehicle shall be furnished with special .equipnent as specified herein- 4 Provided by IHSNot for ResaleNo reprodu

20、ction or networking permitted without license from IHS-,-,-I MIL-S-62080D 23 E 9999906 0492387 4 E MIL-S-6208OU - The vehicle shall be treated and 1. * 3.1.1-1 ktm t and painted in accordance with MIL-STD-1223. activity for the appropriate service (see 6.2), the exterior color shall be in accordance

21、 with MIL-STD-1223. The exterior of the tank stainless steel members shall be unpainted, with a 2B or better finish, free of blemishes, discoloration and other visible defects (see 3.22.2), The frame and undercarriage shall be treated and painted in accordance with MIL-STD-i223 in a gloss black colo

22、r. As specified by the procuring * 3-1-1.2 Marking and data . As specified by the procuring activity for the appropriate services (see 6.2), identification marking and data plates shall be in accordance with MIL-STD-1223- * 3.1.1.3 BiastvroofUlg . When specified (see 6-21, the semitrailer shall be r

23、ustproofed in accordance with FED-STD-297, 3.1-1.4 Tnxic. vr0duct.s am - The materials used in the construction or treatment of surfaces, which may be in contact with potable water during use, shall have no adverse effect on the health of personnel. Materials used shall be non-toxic, relatively non-

24、absorbent, resistant to fat and normal cleaning with bactericidal solutions, and shall not contaminate the water or affect the smell or taste of the water. Nozzle and faucet seals shall be free of asbestos impregnated materials. Parts, fittings, pumps, and piping in contact with water shall be of co

25、rrosion-resistant material not affecting the potability of water. Fabrication of the tank and piping system shall be such that it shall not cause or result in contamination of drinking water. Rubber or plastic materials used on the interior surfaces of gaskets or hoses that contact potable water sha

26、ll meet the requirements of 21 CFR part 177, except materials constructed of acrylonitrile and Co-polymers shall not be used. Manufacturers shall submit evidence to this effect for review and approval by the procuring activity. within 10 days from date of receipt of contract and shall identify all m

27、atarials that come in contact with potable water. handling and usage in ambient temperatures of minus 40 degrees Fahrenheit (OP) to plus 135*F- Such evidence shall be submitted Materials shall withstand * 3.1.1.15 . At least one pair of brake lights shall override the four-way emergency flasher or t

28、he two systems shall be independent of each other. accommodate this requirement shall not compromise conformance to any Federal Motor Carrier Safety Regulation referenced herein or to any Federal Motor Vehicle Safety Standard. If additional lights are added to the vehicle, the lights shall be select

29、ed from the chassis manufacturers standard matching hardware. Modifications to the manufacturers standard product to 3.2.1 Pederaltor Vehicle Snfetv Standards . The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture. 5

30、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-62080D 23 = 9999906 OLt92388 b E MIL-S-62080D * 3.2.2 PiseMar metn1.q . All dissimilar metals used throughout the vehicle shall be insulated from one another to prevent galvanic or electrolytic ac

31、tion. 3.2.3 - Vehicle ratings shall be the manufacturers published ratings. requirements of this specification. available, verification of ratings must be submitted to the engineering office of the procuring activity. the specified size of the vehicle. Component and vehicular ratings shall not be ra

32、ised to meet the When published ratings are not Minimum payload shall conform to 1.2 for ;* 3-2.4 Access* 1.4 - The design of the vehicle and optional equipment 3 shall permit access for routine servicing and shall permit access for disturbance of other components and systems. replacement and adjust

33、ment of component parts and accessories with minimal in. A 2-inch diameter kingpin conforming to SAE 5700 shall be furnished. The kingpin shall be fabricated of heat treated alloy steel. 3.17 aeay . The semitrailer shall have two vertical lift, telescopic, nonrotating landing legs with two-speed gea

34、rs, and a handcrank on the curbside. The landing legs shall be provided with steel wheels or self-leveling skid pads. not in use. The landing gear shall withstand, without deformation, the combined static and dynamic forces due to the portion of the gross weight sustained, and the additional forces

35、resulting from impact during coupling and uncoupling operations- When placed in travel position, the landing gear legs shall remain positively locked- The landing gear shall be protected to prevent the entrance of foreign matter which would impair its functioning or mechanical efficiency. A holder s

36、hall be provided for the handcrank when 3.17.1 RanEte of ndjuwtmed . The landing gear shall have a range of adjustment sufficient to vary the height of the upper fifth wheel plate at the kingpin from 45 inches to not less than 52 inches from the ground for the size 2 and 3 semitrailers and 46 inches

37、 to not less than 54 inches from the ground for the size 4 and 5 semitrailers- the landing gear retracted shall be 14 inches. The minimum ground clearance with 3- 18 Uication svstem - A lubrication system shall be furnished with fittings for all bearings and other working parts which require relubri

38、cation for continued service. Vehicles shall be lubricated, prior to delivery, with applicable grade of standard lubricant for the ambient air temperature encountered at the delivery point. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-b2080D

39、 23 = 99999Ob OLI92399 O MIL-S-6208D li: 3.19 LighLhg. All lights and reflectors shall be protected from operational hazards by mounting in recessed or otherwise guarded locations. Lights and reflectors shall not be mounted on vertical surfaces of rub rails (unless recessed and fully protected) or o

40、n the semitrailer bumper. electrical wiring shall conform to SAE 51292. lights shall be constructed for easy removal and replacement of lamps and lenses without the use of hand tools. All Clearance and identification 3.19.1 BeceDtanle, 13, - volt . The front of the semitrailer shall be equipped with

41、 a 7-contact receptacle conforming to SAE J560 with the connectors connected and color coded as specified therein. shall be provided with a spring loaded cover. located in accordance with CAE 5702. The .receptacle The receptacle shall be 3.19.2 Twelve - volt dc swatern . A 12-volt direct current (dc

42、) lighting system conforming to 3.19 and 3.19.1 shall be provided. lighting system shall conform to Federal Motor Carrier Safety Regulations 393.14, 393.20, 393.22, 393.23, 393.25 through 393.29, 393.32 and 393.33. The 12-volt dc 3.19.3 - . When specified (see 6.2), a 24-volt dc lighting system inde

43、pendent of the 12-volt dc lighting system shall be provided. Separate wiring and bulbs shall be provided for the 24-volt dc system. The system shall conform to 3.19. shall also conform to the Federal Motor Carrier Safety Regulations referenced in 3.19.2, except the 24-volt dc stop and turn lamps sha

44、ll be combined. The 24-volt dc system 3.19-4 hterconnented 24 - volt dc svsteJg . When specified (see 6.2), capability of operating the 12-volt dc system (see 3.19.2) from a towing vehicle equipped with a nominal 24-volt dc electrical system shall also be provided - 3.19.5 BeceDtncle. 24 - volt dc -

45、 When either an independent or interconnected 24-volt dc system is specified, the front of the semitrailer shall also be equipped with a 12-contact receptacle and cover conforming to MS 75021, part number MS 75021-1. accordance with SAE 5702- connected to the lights as follows: The receptacle shall

46、be located in The 24-volt dc 12-contact receptacle shall be Contact B. Contact D. Contact E. Connect to clearance, side marker, identification, and tail Contact J- Contact L. Connect to left-hand turn signal and stop lamp (yellow) Connect to ground (white) lamps (black and brown) Connect to right-ha

47、nd turn signal and stop lamp (green) Connect to ground (white). The rest of the contacts shallmot be connected. tactical trucks are combination stop and turn indicator circuits. interconnected 24-volt system, the normal 12-volt dc turn signal lights will Circuits B and 5 on On the 17 Provided by IHS

48、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-* MIL-S-62080D 3.20 Pear end mntectinq . Semitrailer rear end protection shall be , provided in accordance with Federal Motor Carrier Safety Regulation 393.86. function both as turn signals and stop lights, and the no

49、rmal 12-volt dc stop lights will not be operational when the semitrailer is connected to a towing vehicle with a 24-volt dc power supply. Because of this condition, the stop light (red) circuit is not connected to the 24-volt dc 12-contact receptacle. 3.19.6 BeRistors . When an interconnected 24-volt dc system is specified (see 3.4.19.4), the 12-contact receptacle shall be provided with resistance in each circuit to reduce the voltage of the tactical (military