ARMY UFGS-02 41 00-2010 [DEMOLITION][ AND ][DECONSTRUCTION]《[拆除][和][爆破]》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-02 41 00 (May 2010)-Preparing Activity: USACE SupersedingUFGS-02 41 00 (October 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONSSECTION 02 41 00DEMOLITION

2、 AND DECONSTRUCTION05/10PART 1 GENERAL1.1 REFERENCES1.2 PROJECT DESCRIPTION1.2.1 Demolition/Deconstruction Plan1.2.2 General Requirements1.3 ITEMS TO REMAIN IN PLACE1.3.1 Existing Construction Limits and Protection1.3.2 Weather Protection1.3.3 Trees1.3.4 Utility Service1.3.5 Facilities1.4 BURNING1.5

3、 AVAILABILITY OF WORK AREAS1.6 SUBMITTALS1.7 QUALITY ASSURANCE1.7.1 Hawaii Requirements1.7.2 Dust and Debris Control1.8 PROTECTION1.8.1 Traffic Control Signs1.8.2 Protection of Personnel1.9 FOREIGN OBJECT DAMAGE (FOD)1.10 RELOCATIONS1.11 EXISTING CONDITIONSPART 2 PRODUCTS2.1 FILL MATERIALPART 3 EXEC

4、UTION3.1 EXISTING FACILITIES TO BE REMOVED3.1.1 Structures3.1.2 Utilities and Related Equipment3.1.2.1 General Requirements3.1.2.2 Disconnecting Existing UtilitiesSECTION 02 41 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.1.3 Chain Link

5、 Fencing3.1.4 Paving and Slabs3.1.5 Roofing3.1.5.1 Temporary Roofing3.1.5.2 Reroofing3.1.6 Masonry3.1.7 Concrete3.1.8 Structural Steel3.1.9 Miscellaneous Metal3.1.10 Carpentry3.1.11 Carpet3.1.12 Acoustic Ceiling Tile3.1.13 Airfield Lighting3.1.14 Patching3.1.15 Air Conditioning Equipment3.1.16 Cylin

6、ders and Canisters3.1.17 Locksets on Swinging Doors3.1.18 Mechanical Equipment and Fixtures3.1.18.1 Preparation for Storage3.1.18.2 Piping3.1.18.3 Ducts3.1.18.4 Fixtures, Motors and Machines3.1.19 Electrical Equipment and Fixtures3.1.19.1 Fixtures3.1.19.2 Electrical Devices3.1.19.3 Wiring Ducts or T

7、roughs3.1.19.4 Conduit and Miscellaneous Items3.1.20 Elevators and Hoists3.1.21 Items With Unique/Regulated Disposal Requirements3.2 CONCURRENT EARTH-MOVING OPERATIONS3.3 DISPOSITION OF MATERIAL3.3.1 Title to Materials3.3.2 Reuse of Materials and Equipment3.3.3 Salvaged Materials and Equipment3.3.4

8、Debris Disposal in the San Diego Area3.3.5 Disposal of Ozone Depleting Substance (ODS)3.3.5.1 Special Instructions3.3.5.2 Fire Suppression Containers3.3.6 Transportation Guidance3.3.7 Unsalvageable and Non-Recyclable Material3.4 CLEANUP3.5 DISPOSAL OF REMOVED MATERIALS3.5.1 Regulation of Removed Mat

9、erials3.5.2 Burning on Government Property3.5.3 Removal to Spoil Areas on Government Property3.5.4 Removal from Government Property3.6 REUSE OF SALVAGED ITEMS- End of Section Table of Contents -SECTION 02 41 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

10、e from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-02 41 00 (May 2010)-Preparing Activity: USACE SupersedingUFGS-02 41 00 (October 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 02 41 00DEMOLITION AND DECONSTRUCTION05/10*NOTE: This guide s

11、pecification covers the requirements for demolition, deconstructon, dismantling, reconditioning and disposal of existing building materials, equipment and utilities as a part of new construction or renovation work.Edit this guide specification for project specific requirements by adding, deleting, o

12、r revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to th

13、e technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).TO DOWNLOAD UFGS GRAPHICSGo to http:/wbdg.org/ccb/NAVG

14、RAPH/graphtoc.pdf.*PART 1 GENERAL*NOTE: Where premises are occupied, certain spaces may exist where activities cannot be interrupted or disturbed during normal working hours. To prevent disputes or possible contract claims resulting from restriction of demolition or removal work in such spaces, prov

15、isions for scheduling of the work must be specified in the contract documents. Restrictions for scheduling of demolition or removal work in areas adjacent to or in occupied spaces SECTION 02 41 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

16、-should reflect the requirements resulting from the consultation with occupants of the affected spaces. These provisions are necessary to alert prospective bidders about the spaces where business is not to be interrupted or disturbed during construction.Delete requirements if inapplicable.Where susp

17、ect deck conditions are encountered during design investigation, identify and include appropriate repair and safety provisions in the design documents to draw attention to the suspect areas and the need for additional safety precautions.Include “Notification of Demolition and Renovation“ form for Ha

18、waii only.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Ch

19、eck Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this s

20、ection of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AIR-CONDITIONING, HEATING

21、 AND REFRIGERATION INSTITUTE (AHRI)AHRI Guideline K (2009) Guideline for Containers for Recovered Non-Flammable Fluorocarbon RefrigerantsAMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS (AASHTO)AASHTO M 145 (1991; R 2004) Standard Specification for Classification of Soils and Soil-

22、Aggregate Mixtures for Highway Construction PurposesAASHTO T 180 (2009) Standard Method of Test for SECTION 02 41 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and an 457-m

23、m (18-in) DropAMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)ASSE/SAFE A10.6 (2006) Safety Requirements for Demolition OperationsCARPET AND RUG INSTITUTE (CRI)CRI 104 (2002) Standard for Installation Specification of Commercial CarpetU.S. ARMY CORPS OF ENGINEERS (USACE)EM 385-1-1 (2008) Safety and

24、Health Requirements ManualU.S. DEFENSE LOGISTICS AGENCY (DLA)DLA 4145.25 (June 2000) Storage and Handling of Liquefied and Gaseous Compressed Gases and Their Full and Empty CylindersU.S. DEPARTMENT OF DEFENSE (DOD)DOD 4000.25-1-M (2004) Military Standard Requisitioning and Issue ProceduresMIL-STD-12

25、9 (2007; Rev P; Change 4) Military Marking for Shipment and StorageU.S. FEDERAL AVIATION ADMINISTRATION (FAA)FAA AC 70/7460-1 (2007; Rev K) Obstruction Marking and LightingU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)40 CFR 61 National Emission Standards for Hazardous Air Pollutants40 CFR

26、 82 Protection of Stratospheric Ozone49 CFR 173.301 Shipment of Compressed Gases in Cylinders and Spherical Pressure Vessels1.2 PROJECT DESCRIPTION*NOTE: Make a determination as to whether any material of a hazardous nature, as classified in the National Emissions Standards, OSHA, or EPA regulations

27、, will result from the work described. If such material is determined likely, specify precautions and standards to be complied with. Since the Contractor performs the work, the Contractor will be the one responsible for complying SECTION 02 41 00 Page 5Provided by IHSNot for ResaleNo reproduction or

28、 networking permitted without license from IHS-,-,-with all necessary regulations.Protect personnel from possible airborne contaminants, such as asbestos fibers, dried fecal matter (bird droppings) and metal dusts.For Navy projects: Contact an industrial hygienist at (1) A Navy Regional Medical Cent

29、er, (2) A Navy Environmental and Preventive Medicine Unit, or (3) the Navy Environmental Health Center for assistance. Disposal of materials must not endanger or pollute the environment. Obtain assistance from the environmental branch of the Engineering Field Division of the Naval Facilities Enginee

30、ring Command or from the Naval Facilities Engineering Service Center, Norfolk, Virginia.Non-friable materials containing asbestos, such as cement-asbestos siding and roofing and vinyl-asbestos flooring materials, normally do not require special handling and disposal procedures unless such materials

31、are sawn, ground, sanded, drilled, pulverized, or handled in such a manner that will cause dust and airborne asbestos fiber to be released. Thus the removal of non-friable asbestos will not normally require the use of Section 02 82 16.00 20 ENGINEERING CONTROL OF ASBESTOS CONTAINING MATERIALS or Sec

32、tion 02 82 14.00 10 ASBESTOS HAZARD CONTROL ACTIVITIES. If the project contains non-friable asbestos that is considered to be hazardous due to material condition (broken down or excessively old and decayed) or demolition or deconstruction procedures to be used, then specify the non-friable asbestos

33、to be removed in accordance with Section 02 82 16.00 20 or 02 82 14.00 10.For “LANTNAVFACENGCOM“ projects use “project site“ in Guantanamo Bay, Cuba; for all other projects use “station daily.“Deconstruction is the process of taking apart a facility with the primary goal of preserving the value of a

34、ll useful building materials, so that they may be reused or recycled. It should be considered when adaptive reuse of a building is not an option, and may be used in conjunction with demolition. Deconstruction minimizes demolition landfill materials and reduces material costs for the converted facili

35、ty. Diverting demolition waste from the landfill contributes to the following LEED credit: MR2. Coordinate with Section 01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT.*1.2.1 Demolition/Deconstruction Plan*NOTE: Either a Demolition Plan or a Deconstruction SECTION 02 41 00 Page 6Provided by IH

36、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Plan is required. A project requiring both demolition and deconstruction work will name the plan according to the majority of the work being performed, and the plan will include requirements for both types of work.*P

37、repare a Demolition Plan Deconstruction Plan and submit proposed salvage, demolition, deconstruction, and removal procedures for approval before work is started Include in the plan procedures for careful removal and disposition of materials specified to be salvaged, coordination with other work in p

38、rogress, a disconnection schedule of utility services, and airfield lighting, a detailed description of methods and equipment to be used for each operation and of the sequence of operations. Identify components and materials to be salvaged for reuse or recycling with reference to paragraph Existing

39、Facilities to be Removed. Append tracking forms for all removed materials indicating type, quantities, condition, destination, and end use. Coordinate with Waste Management Plan. Include statements affirming Contractor inspection of the existing roof deck and its suitability to perform as a safe wor

40、king platform or if inspection reveals a safety hazard to workers, state provisions for securing the safety of the workers throughout the performance of the work. Provide procedures for safe conduct of the work in accordance with EM 385-1-1. Plan shall be approved by Structural PE Contracting Office

41、r prior to work beginning.1.2.2 General RequirementsDo not begin demolition or deconstruction until authorization is received from the Contracting Officer. The work of this section is to be performed in a manner that maximizes salvage and recycling of materials. Remove rubbish and debris from the st

42、ation daily project site; do not allow accumulations inside or outside the buildings on airfield pavements. The work includes demolition, deconstruction, salvage of identified items and materials, and removal of resulting rubbish and debris. Remove rubbish and debris from Government property daily,

43、unless otherwise directed. Store materials that cannot be removed daily in areas specified by the Contracting Officer. In the interest of occupational safety and health, perform the work in accordance with EM 385-1-1, Section 23, Demolition, and other applicable Sections.1.3 ITEMS TO REMAIN IN PLACE

44、Take necessary precautions to avoid damage to existing items to remain in place, to be reused, or to remain the property of the Government. Repair or replace damaged items as approved by the Contracting Officer. Coordinate the work of this section with all other work indicated. Construct and maintai

45、n shoring, bracing, and supports as required. Ensure that structural elements are not overloaded. Increase structural supports or add new supports as may be required as a result of any cutting, removal, deconstruction, or demolition work performed under this contract. Do not overload structural elements pavements to remain. Provide new supports and reinforcement for existin