ASTM D7495-2012 7500 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials《授权机构对路面和铺装材料进行.pdf

1、Designation: D7495 12Standard Specification forMinimum Requirements for Accreditation Bodies thatAccredit Agencies Testing and Inspecting Road and PavingMaterials1This standard is issued under the fixed designation D7495; the number immediately following the designation indicates the year oforiginal

2、 adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This document contains minimum requirements forestablishing and imp

3、lementing an Accreditation Program foragencies testing and inspecting road and paving materials.1.2 The criteria in this document are applicable to Accredi-tation Programs which accredit agencies testing and inspectingroad and paving materials.1.3 This standard does not purport to address all of the

4、safety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D3666 Specification for Mini

5、mum Requirements for Agen-cies Testing and Inspecting Road and Paving Materials2.2 ANSI/ISO/IEC Standards:ANSI/ISO/IEC 17011 General Requirements for Accredita-tion Bodies Accrediting Conformity Assessment BodiesANSI/ISO/IEC 17025 General Requirements for the Com-petence of Testing and Calibration L

6、aboratories3. Terminology3.1 Accreditation BodyAuthoritative body that managesan accreditation program.3.2 Accreditation Program for Agencies Testing and In-specting Road and Paving Materialsa program administeredby an independent authority to fairly and equitably recognizean agency for conformance

7、to defined quality criteria.3.3 Testing Agency Quality Systemthe organizationalstructure, staff responsibilities, policies, standard operatingprocedures, and processes which, when implemented, assist thetesting agency in achieving its quality objectives.3.4 Evaluation Authorityan independent entity,

8、 apart fromthe testing laboratory being evaluated, that has the capability toprovide an unbiased evaluation of the professional and testingactivities of testing laboratories.3.5 Agencythe organization engaged to test or inspect, orboth, road and paving materials as required by a specificationor cont

9、ract.4. Significance and Use4.1 This document supplements ANSI/ISO/IEC 17011 andtogether these two documents provide the minimum require-ments for an accreditation body which accredits agenciestesting and inspecting road and paving materials.4.2 The user is cautioned that accreditation granted by an

10、accreditation body can only serve a useful purpose if theprocedures followed to obtain the accreditation are practicedon a daily basis by the testing agency. It is not the existence ofthe system but the routine implementation of the proceduresand policies of the quality system that is important.5. A

11、ccreditation Body5.1 The accreditation body in developing and implementingits accreditation program shall meet the requirements inANSI/ISO/IEC 17011 and the requirements of this standard.6. Personnel6.1 The accreditation body shall document the duties, re-sponsibilities and authorities of top manage

12、ment who couldaffect the quality of the accreditation process.6.2 The accreditation body shall ensure that personnel havethe necessary and proper education, experience, training, andtechnical knowledge.6.3 The accreditation body shall describe the requiredqualifications, education, and experience fo

13、r each positionwithin their organization.1This specification is under the jurisdiction of ASTM Committee on Road andPaving Materials and is the direct responsibility of Subcommittee D04.95 onQuality Control, Inspection and Testing Agencies.Current edition approved June 1, 2012. Published November 20

14、12. DOI:10.1520/D7495122For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr

15、 Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States16.4 The accreditation body shall ensure that the assessorsthey employ are familiar with the accreditation process andaccreditation criteria.6.5 The assessors shall be trained through a formal assessortraining program that ve

16、rifies an assessors technical qualifi-cations. The assessors shall be trained in the use of the methodsand documents used for assessments. Training records shall bemaintained by the accreditation body.6.6 The assessors shall be thoroughly trained in the qualitymanagement system requirements and have

17、 a thorough knowl-edge of the test methods which they are assessing. Trainingrecords shall be maintained by the accrediting body.6.7 The assessors shall not perform any assessment if aconflict of interest exists between the assessor and the labora-tory.6.8 The accreditation body shall evaluate each

18、assessorsperformance. The evaluations shall consist of an on-siteobservation or peer monitoring in conjunction with the reviewof either the assessors feedback from laboratories or a reviewof assessment reports. These reviews shall be conducted atleast once every three 3 years. Evaluation records sha

19、ll bemaintained by the accreditation body.6.9 The accreditation body shall, as a minimum, holdmeetings at least annually with assessors to discuss changes inprocedures, provide training to ensure consistency inassessments, present any issues noted during the annual man-agement review that apply to t

20、he assessments, and other topicsthat would assist the assessors in improving the quality of theirservices.7. Accreditation Process7.1 The accreditation body shall conduct on-site assess-ments that include a detailed review of test procedures, testingequipment, and quality systems. This assessment sh

21、all verifythat the testing agency has the appropriate equipment, calibra-tion and verification records, test procedures, and trainedpersonnel to perform every procedure for which the laboratoryhas requested accreditation.7.2 The accreditation body shall conduct on-site assess-ments at 24-month inter

22、vals. If the accreditation body performsannual surveillance or desk audits, the interval for on-siteassessments may be increased to a maximum of 30 months.NOTE 1The accreditation body may use designated evaluation au-thorities to perform some or all of the on-site assessments required foraccreditati

23、on provided the accreditation body has documented that theevaluation authority meets all the requirements of this standard.7.3 The on-site assessment shall include a demonstration ofeach test method or practice for which the testing agency hasrequested accreditation. At the discretion of the assesso

24、r, it ispermitted for some procedural aspects of the test methods orpractices to be described by laboratory personnel in lieu ofdemonstration. The test methods shall be performed by tech-nicians employed by the laboratory at the specific locationseeking accreditation.7.4 The assessor shall verify th

25、at the equipment that thelaboratory uses to perform the testing that is listed in theproposed scope of accreditation complies with the specifica-tions listed within the test standards. This accreditation bodyshall verify the compliance of the laboratorys test equipmentwith its own equipment that, wh

26、ere practical, has been cali-brated by an agency which complies with ISO/IEC 17025(Note 2). The assessor has the option of either physicallyverifying the test equipment or observing laboratory personnelphysically verifying the test equipment with the equipment thatis owned or controlled by the accre

27、ditation body. A review ofthe laboratorys equipment records would satisfy this require-ment if the equipment has been calibrated or verified by acalibration agency which satisfies the requirements of ISO/IEC17025.NOTE 2Certain equipment used in verifications is not readily cali-brated such as tape m

28、easures, feeler gauges, and straight edges. Equip-ment such as temperature measuring devices, calipers, pressure gauges,can be readily calibrated.7.5 The on-site assessment shall include a review of thetesting agencys quality system. The testing agencys qualitysystem as a minimum shall conform to th

29、e requirements ofASTM D36667.6 The accreditation body shall require that the testingagency return an initial response within 30 days from the dateof the assessment report. This response shall include a recordof investigations made and corrective action taken.All findingsnoted in the assessment repor

30、ts issued to the testing agencyshall be completely resolved within 90 days from the assess-ment report date.8. Proficiency Testing Requirements8.1 The accreditation body shall verify and document thatthe testing agency participates in applicable proficiency sampleprograms for those tests that the la

31、boratory is requestingaccreditation, when such programs exist. The proficiencysample program shall meet the following minimum criteria:8.1.1 Includes a minimum of 30 participants, each repre-senting a different laboratory and different technicians.8.1.2 Issues rating(s) for the test method(s) covere

32、d.8.1.3 Covers one or more of the test methods for which thetesting agency requested accreditation.8.1.4 Is independent of the participating laboratories.8.1.5 Distributes samples at least once annually.8.2 The accreditation body shall require that the testingagency complete a record of investigatio

33、ns made and correc-tive action taken to address any proficiency sample result thatwas greater than 2 standard deviations from the averageobtained by the participating laboratories.9. Assessment Reports9.1 The accreditation body or their designated evaluationauthority shall issue a detailed assessmen

34、t report on adherenceto standards by the testing agency as evidenced by the testingagencys quality manual and verified by the assessor for allstandards under which the testing agency has requested ac-creditation. The assessment report shall include as a minimumthe following:9.1.1 Standards / Test Me

35、thods / Practices which werecovered during the on-site assessment.D7495 1229.1.2 Nonconformities/findings which were observed dur-ing the on-site assessment.9.1.3 Date of Assessment.9.1.4 Name of Assessor.10. Granting Accreditation10.1 The accreditation body shall, prior to making adecision, be sati

36、sfied that all the requirements have beensatisfied.10.2 If all requirements have been met, the accreditationbody shall issue an accreditation certificate or shall otherwisepublicize accreditation details including:10.2.1 Identity and logo of accreditation body.10.2.2 Identity and location of the tes

37、ting agency.10.2.3 Unique identification number of the testing agency.10.2.4 Effective date of granting accreditation.10.2.5 Accreditation expiration date.10.2.6 Scope of accreditation including each test method,practice or other standard.10.2.7 Reference to the standard upon which the accredita-tio

38、n was based.10.3 The accreditation body shall maintain a directory thatincludes all accredited laboratories. The directory shall includethe following:10.3.1 Name and location of each laboratory.10.3.2 Dates of granting accreditation.10.3.3 Accreditation expiration date.10.3.4 Scopes of accreditation

39、 including each test method,practice or other standard.11. Keywords11.1 Accreditation Programs; Laboratory Accreditation;Construction Materials Testing Laboratories; Construction Ma-terials Testing; Quality Manual; Quality SystemASTM International takes no position respecting the validity of any pat

40、ent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision

41、 at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comm

42、ents will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighte

43、d by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D7495 123