ASTM F1031-2000(2012) Standard Practice for Training the Emergency Medical Technician (Basic)《急救医疗技师培训 (基础) 的标准实施规程》.pdf

1、Designation: F1031 00 (Reapproved 2012)Standard Practice forTraining the Emergency Medical Technician (Basic)1This standard is issued under the fixed designation F1031; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of la

2、st revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers a standard course for the training ofthe emergency medical technician (basic) which will prepare ap

3、erson to perform those skills commonly required to renderlifesaving aid at the scene of an emergency and duringtransportation to a definitive care facility.1.2 It is not the intent of this practice to require that thecurriculum be used exactly as presented, but only that theknowledge and skill objec

4、tives that are part of the curriculumbe included in any course purporting to train the emergencymedical technician (basic). It is not the intent of this practice tolimit the addition of knowledge and skill objectives as requiredby local conditions.2. Referenced Documents2.1 U.S. Department of Transp

5、ortation/National HighwayTraffc Safety Administration:DOT Emergency Medical Technician-Ambulance: NationalStandard Curriculum, Course Guide , latest version2DOT HS Emergency Medical Technician-Ambulance: Na-tional Standard Curriculum, Instructors Lesson Plans, latestversion.23. Description of Term S

6、pecific to This Standard3.1 emergency medical technician (basic)as outlined inthis practice, a person who has successfully completed thecourse of training, may provide emergency medical care, andmay transport the sick and injured. Legal functioning as anEMT (basic) will be based upon licensure/certi

7、fication require-ments, as established by the authority or authorities havingjurisdiction.4. Significance and Use4.1 The purpose of this practice is to provide a standardmeans of providing Emergency Medical Technician (Basic)training. The practice should be used by all individuals andagencies that t

8、rain such persons.4.2 Successful completion of this course of training neitherconstitutes nor implies certification or licensure.4.3 This practice adopts the knowledge and skill objectivescontained in the DOT curriculum (latest version) as thestandard practice for training those persons who providee

9、mergency medical care at the basic life support level and areknown as emergency medical technicians (basic). The actuallesson plans contained in the referenced document are recom-mended for use; however, each instructor may modify the orderof presentation according to local needs.4.4 This practice o

10、utlines a comprehensive course thatcovers most common emergencies encountered by the emer-gency medical technician. EMT-basic courses that do notinclude all of the knowledge and skill objectives of thispractice may not be referred to as meeting this standard.5. Contents of Course5.1 The practice for

11、 training the emergency medical techni-cian (basic) is a course consisting of, at a minimum, theknowledge and skill objectives contained in DOT curriculum(latest version). The knowledge and skill objectives are delin-eated as Objectives and are listed at the beginning of each ofthe designated lesson

12、s contained in the document. The courseshall also include the objectives listed in the In-hospitalClinical Guidelines, Appendix C, of DOT curriculum (lastestversion).6. Course Implementation6.1 The course shall be conducted in accordance with theregulations of the governmental authority having juris

13、diction.6.2 It is highly recommended that all courses adhere to theprocedure for presentation outlined in DOT curriculum (latestversion).7. Keywords7.1 EMS; EMT; curriculum1This practice is under the jurisdiction of ASTM Committee F30 on EmergencyMedical Services and is the direct responsibility of

14、Subcommittee F30.02 onPersonnel, Training and Education.Current edition approved July 1, 2012. Published August 2012. Originallyapproved in 1986. Last previous edition approved in 2006 as F1031 00 (2006).DOI: 10.1520/F1031-00R12.2Available from U.S. Government Printing Office Superintendent of Docum

15、ents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http:/www.access.gpo.gov.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.ASTM International takes no position respecting the validity of any patent rights asserted in

16、 connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the re

17、sponsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive care

18、ful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM Internationa

19、l, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).F1031 00 (2012)2