ASTM F1910-1998(2003) Standard Specification for Long Barbed Tape Obstacles《长的有倒刺带状障碍物的标准规范》.pdf

1、Designation: F 1910 98 (Reapproved 2003)Standard Specification forLong Barbed Tape Obstacles1This standard is issued under the fixed designation F 1910; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A n

2、umber in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers barbed tape materials andconfigurations used for security barriers.2. Referenced Documents2.1 ASTM Standards:

3、A 176 Specification for Stainless and Heat-Resisting Chro-mium Steel Plate, Sheet and Strip2A 240 Specification for Chromium and Chromium-NickelStainless Steel Plate, Sheet and Strip for Pressure Vesselsand for General Applications2A 370 Test Methods and Definitions for Mechanical Testingof Steel Pr

4、oducts2A 666 Specification for Annealed or Cold-Worked Austen-itic Stainless Steel Sheet, Strip, Plate and Flat Bar2A 764 Specification for Metallic Coated Carbon Steel Wire,Coated at Size and Drawn to Size for Mechanical Springs2F 1379 Terminology Relating to Barbed Tape33. Terminology3.1 Refer to

5、Terminology F 1379.4. Classification4.1 Refer to 5.1.8.5. Ordering/Specifying Information5.1 Ordering or specifying barbed tape shall include thefollowing information as per sample specification, or byreferencing item numbers in Tables 1 and 2 (indicate number ofloops, if applicable). Material furni

6、shed under this specificationshall conform to applicable requirements of current editions ofASTM Standards.NOTE 1The following sample specification is provided to assist whenspecifying or ordering barbed tape material. Actual size and style will varyby individual job requirements.Sample Specificatio

7、n OnlyBarbed tape obstacle shall be 30 in.diameter (62 in.). Each loop shall consist of 24 (61) clusters of fourneedle-sharp barbs on 4 in. centers, each barb measuring a minimum of1.2 in. in length. The barbed tape shall be fabricated from Series 430stainless steel with optional hardness. The barbe

8、d tape shall be perma-nently coldclenched over an austenitic mechanical spring core wire. Thewire shall have a diameter of 0.098 in. with a minimum tensile strength ofapproximately 140 psi. The barbed tape shall have a minimum 230 wrapabout the core wire. Adjacent alternate loops shall be clipped to

9、gether infive (5) locations around the circumference to obtain the concertina effect.Clip spacing of the extended coil shall be 12 6 2 in. Clips shall be capableof withstanding a minimum pull load of 200 lb. Each coil shall contain 51loops and cover 25 6 1 ft.5.1.1 QuantityThe number of units of bar

10、bed tape re-quired. For fixed length units, the length per unit should bespecified.5.1.2 Description Barbed tape shall be described as singlecoil helical, single coil concertina, double coil concertina, ordouble coil helical.5.1.3 DiameterThe purchaser shall specify the packageddiameter. When double

11、 coil products are specified, the innerand outer coil packaged diameters shall be given.5.1.4 Barb Length Refer to Terminology F 1379 andTables 1 and 2.5.1.5 Coil LoopsThe number of coil loops shall bespecified by the purchaser.5.1.6 Unit Length The purchaser shall specify the in-stalled length and

12、coil spacing, including the coil spacingtolerance.5.1.7 Number of attachment points, in accordance withTerminology F 1739 and Tables 1 and 2.5.1.8 Cross Sections The purchaser shall specify the crosssections in accordance with Terminology F 1379.6. Material6.1 Composition Barbed tape shall be manufa

13、ctured fromstainless and galvanized steel in accordance with the ASTMstandards listed in Section 2. Manufacturers are not necessarilylimited to those materials listed.6.1.1 Stainless Steel Stainless steel strip shall be eitherferretic or austenitic. Stainless steel should be ordered to theAISA or UN

14、S designations to ensure the correct chemistry.6.1.1.1 Ferritic stainless steels shall be produced in accor-dance with Specification A 176 or Specification A 240.1This specification is under the jurisdiction of ASTM Committee F14 on Fencesand is the direct responsibility of Subcommittee F14.40 on Ch

15、ain Link Fence andWire Accessories.Current edition approved July 10, 2003. Published September 2003. Originallyapproved in 1998. Last previous edition approved in 1998 as F 1910 - 98.2Annual Book of ASTM Standards, Vol 01.03.3Annual Book of ASTM Standards, Vol 01.06.1Copyright ASTM International, 10

16、0 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.6.1.1.2 Austenitic stainless steels shall be purchased inaccordance with Specification A 666.7. Dimensions and Permissible Variations7.1 Permissible variations within coil diameters shall be asspecified in Tables 1 and

17、 2 for standard trade sizes.8. Workmanship, Finish and Appearance8.1 Workmanship Coil loops shall not be kinked, unless itis part of the design.8.1.1 Each coil shall be one continuous length properlycoiled and firmly tied for shipping. Welds made in the stripprior to forming are permitted. A maximum

18、 of three splices percoil are permitted either by overlapping and welding orpermanently clamping together with a suitable device designedfor the purpose.8.2 Surfaces shall be smooth and free of rust with no seriousdefects, such as pits, die marks, and other defects to impair theintegrity of the prod

19、uct.9. Certification9.1 When specified in the purchase order or contract, amanufacturers certification of compliance shall be furnished tothe purchaser showing the quantity, size and type of barbedtape. The certification of compliance shall state that therepresentative barbed tape is in accordance w

20、ith the specifica-tion.10. Keywords10.1 barbed tapeTABLE 1 Stainless Steel Long Barbed Tape (Reinforced) (See Terminology F 1379, Figs. 2 and 3)NOTE 1Maximum barb point radius = 0.005 in.NOTE 2Minimum barb length = 1.2 in.NOTE 3Maximum barb spacing=4in.Item Num-berDescription Barbed Tape Ma-terialCo

21、re-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 62.0 in.Coil Length, ft AttachmentPointsHelical1 18 in. Single CoilHelical430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 33 12 in.18 in.3350002 18 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class I

22、II13 33 12 in.18 in.3350003 18 in. Single CoilHelical430 SS 0.025 in.Thick0 13 33 12 in.18 in.3350004 18 in. Type III SingleCoil Helical300 Series SS0.025 in. Thick0 13 33 12 in.18 in.3350005 24 in. Single CoilHelical430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)19 6 1 33 12 in.18 in.3350

23、006 24 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III19 6 1 33 12 in.18 in.3350007 24 in. Single CoilHelical430 SS 0.025 in.Thick0196 1 33 12 in.18 in.335000Concertina8 18 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III13 315116 in.12 in.20

24、2503039 18 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 315116 in.12 in.2025030310 24 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III19 6 1315116 in.12 in.2025030311 24 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS

25、300 Series140 KSI (965 MPa)19 6 1315116 in.12 in.2025030312 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III24 6 1315116 in.12 in.2025030313 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)24 6 1315116 in.12 in.2025030314 30 in

26、. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III24 6 1518110112 in.12 in.12 in.254050050505F 1910 98 (2003)2TABLE 1 ContinuedItem Num-berDescription Barbed Tape Ma-terialCore-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 62.0 in.Coil Length, ft Attachm

27、entPoints15 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)24 6 1518110112 in.12 in.12 in.25405005050516 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III31 6 1518112 in.12 in.254007070717 40 in. Single Coil Con-certina430 SS 0

28、.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)31 6 1518112 in.12 in.2540050518 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)31 6 1518112 in.12 in.2540070719 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III45 6 1518112 in.

29、12 in.2540090920 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)45 6 1518112 in.12 in.2540090921 24/30 in. Double CoilConcertina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III43 6 2 31 16/16 in. 20 322 24/30 in. Double CoilConcertina430 SS 0.025 in.Thick0

30、.098 SS 300 Series140 KSI (965 MPa)43 6 2 31 16/16 in. 20 3F 1910 98 (2003)3TABLE 2 Non-Reinforced (See Terminology F 1379, Fig. 1)ItemNumberDescription Barbed TapeMaterialCore-WireMaterialBarb Clustersper LoopCoil Loops Coil LoopSpacing 62 in.Coil Length, ft AttachmentPointsNumber of 7 37SS CablesD

31、ouble Helical23 24/30 GPBTOType II300 Series SS0.025 in. Thicknone 19/24 6 1 33/33 24/24 66 0 4-3/64Concertina24 24 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 19 6 1 101 12 in. 50 3 1-3/64 3 5/6425 30 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 24 6 1 101 12 in. 50 5 1-3/6

32、4 3 5/6426 40 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 31 6 1 101 12 in. 50 7 1-3/64 3 5/6427 60 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 45 6 1 101 12 in. 50 13 1-3/64 3 5/64ASTM International takes no position respecting the validity of any patent rights asserted in

33、 connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the re

34、sponsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive care

35、ful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM Internationa

36、l, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F 1910 98 (2003)4