BS 4427-4-1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of los.pdf

1、BRITISH STANDARD BS 4427-4: 1969 Methods of test for Sodium tripolyphosphate (penta sodium triphosphate) and sodium pyrophosphate (tetra sodium pyrophosphate) Part 4: Determination of loss on ignitionBS4427-4:1969 This British Standard, having been approved by the Chemicals Industry Standards Commit

2、tee, was published under the authorityof the Executive Boardon 28 February1969 BSI 11-1999 The following BSI reference relates to the work on this standard: Committee reference CIC/25 ISBN 580 05436 5 Co-operating organizations The Chemicals Industry Standards Committee, under whose authority this B

3、ritish Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Board of Trade British Steel Industry Chemical Industries Association* Department of Health & Social Security Fertiliser Manufacturers Association Ltd.* Ga

4、s Council Institution of Gas Engineers Ministry of Technology. Laboratory of the Government Chemist* National Sulphuric Acid Association Royal Institute of Public Health & Hygiene The industrial organizations marked with an asterisk in the above list, together with the following, were directly repre

5、sented on the committee entrusted with the formulation of the UnitedKingdom point of view in the international work leading to the publication of this British Standard: British Pharmacopoeia Commission Flour Milling and Baking Research Association Institute of Metal Finishing National Association of

6、 Soft Drink Manufacturers Society for Water Treatment and Examination Textile Institute Amendments issued since publication Amd. No. Date CommentsBS4427-4:1969 BSI 11-1999 i Contents Page Co-operating organizations Inside front cover Foreword ii 1 Scope 1 2 Principle 1 3 Apparatus 1 4 Procedure 1 5

7、Expression of results 1 6 Test report 1BS4427-4:1969 ii BSI 11-1999 Foreword For some years the United Kingdom has participated in the work of preparing methods of test for sodium tripolyphosphate and sodium pyrophosphate for industrial use, carried out within Working Group7 of Technical Committee47

8、 Chemistry, of the InternationalOrganization for Standardization (ISO). As international agreement is reached on the methods, it is proposed to publish them as parts of this BritishStandard. This part is technically identical with ISO Recommendation R853, “Sodium tripolyphosphate and sodium pyrophos

9、phate for industrial use. Determination of loss on ignition”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fro

10、m legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment

11、table on the inside front cover.BS4427-4:1969 BSI 11-1999 1 1 Scope This Part of BS4427 describes a method for the determination of loss on ignition of sodium tripolyphosphate and sodium pyrophosphate for industrial use. 2 Principle The principle of this method of test is ignition at550 25 C to cons

12、tant mass. 3 Apparatus Ordinary laboratory apparatus with the following shall be used: 3.1 Porcelain crucible, approximately25mm in diameter. 3.2 Electric furnace, regulated at550 25 C. 4 Procedure 4.1 Test portion. Weigh to the nearest milligramme, approximately5g of the test sample, into the porce

13、lain crucible (3.1) previously ignited at550 C, cooled in a desiccator and weighed. 4.2 Determination. Place the crucible containing the test portion (4.1) in the furnace (3.2), start heating and progressively raise the temperature to550 25 C. Maintain it at this temperature for about1h. Then remove

14、 the crucible from the furnace and place it in a desiccator. Weigh after cooling. Repeat the heating to550 25 C to constant mass. 5 Expression of results Loss on ignition expressed as a percentage by mass, is given by the following formula: 6 Test report State the following in the report: 1) the ref

15、erence of the method used, 2) the results and the method of expression used, 3) any unusual features noted during the determination, 4) any operation not included in this standard or regarded as optional. where m 1 is the mass, in grammes, of crucible and test sample before ignition, m 2 is the mass

16、, in grammes, of crucible and test sample after ignition, E is the mass, in grammes, of the test portion. m 1 m 2 E -100 2 blankBS4427-4:1969 BSI 11-1999 British Standards The following are available on application: YEARBOOK Including subject index and numerical list of British Standards15s. SECTION

17、AL LISTS. Gratis Acoustics (SL10) Aerospace materials and components (SL25) Automobile (SL34) British Standard Handbooks (SL27) Building (SL16) Chemical engineering (SL5) Chemicals, fats, glues, oils, soap, etc. (SL4) Cinematography and photography (SL1) Coal, coke and colliery requisites (SL13) Cod

18、es of Practice (SL8) Consumer goods (SL3) Documentation, including Universal Decimal Classification (SL35) Drawing practice (SL37) Electrical Engineering (SL26) Farming, dairying and allied interests (SL31) Furniture, bedding and furnishings (SL11) Gardening, horticulture and landscape work (SL41) G

19、as and solid fuel and refractories (SL2) Glassware, excluding laboratory apparatus (SL39) Heating, ventilating and air conditioning (SL42) Hospital equipment (SL18) Illumination and lighting fittings (SL14) Industrial instruments, etc. (SL 17) Iron and steel (SL 24) Laboratory apparatus (SL 23) Leat

20、her, plastics, rubber (SL 12) Local authority purchasing officers guide (SL 28) Machine tools (SL 20) Mechanical engineering (SL 6) Nomenclature, symbols and abbreviations (SL 29) Non-ferrous metals (SL 19) Nuclear energy (SL 36) Packaging and containers (SL 15) Paints, varnishes, paint ingredients

21、and colours for paints (SL9) Personal safety equipment (SL30) Petroleum industry (SL 38) Printing and stationery, paper and board (SL22) Road engineering (SL32) Shipbuilding (SL40) Textiles and clothing (SL33) Welding (SL7)BS 4427-4: 1969 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsI

22、nstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards s

23、hould make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical commi

24、ttee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI,

25、international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise re

26、quested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and serv

27、ices. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:0208

28、9967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a re

29、trieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designa

30、tions. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.