BS EN 12036-1997 Self-adhesive tapes - Solvent penetration into adhesive masking tapes《自粘胶带 溶剂浸入的防护胶粘带》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12036 : 1997 The Eu

2、ropean Standard EN 12036 : 1996 has the status of a British Standard ICS 83.180 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Self-adhesive tapes Solvent penetration into adhesive masking tapesBS EN 12036 : 1997 This British Standard, having been prepared under the direction

3、 of the Consumer Products and Services Sector Board, was published under the authority of the Standards Board and comes into effect on 15 February 1997 BSI 1997 The following BSI references relate to the work on this standard: Committee reference PKW/3 Draft for comment 92/42635 DC ISBN 0 580 26731

4、8 Amendments issued since publication Amd. No. Date Text affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PKW/3, Distribution packaging, transport packaging and unit loads, upon which the following bodies were rep

5、resented: British Adhesives and Sealants Association British Apparel and Textile Confederation British Coatings Federation Ltd. British Fibreboard Packaging Association British Glass Manufacturers Confederation British Industrial Truck Association British Plastics Federation British Retail Consortiu

6、m British Rubber Manufacturers Association Ltd. British Tensional Strapping Association Ltd. British Timber Merchants Association British Wood Preserving and Damp-proofing Association Chamber of Shipping Chemical Industries Association China Clay Association Cranfield Logistics Department of Transpo

7、rt Engineering Equipment and Materials Users Association Federation of the Electronics Industry Flexible IBC Association Food and Drink Federation Independent Pallet Repair Committee Institute of Grocery Distribution Metal Packaging Manufacturers Association Ministry of Defence National Association

8、of Pallet Distributors Power Fastenings Association Pira International Road Haulage Association Ltd. Society of Occupational Medicine Storage Equipment Manufacturers Association Timber Packaging and Pallet Confederation Timber Research and Development Association United Kingdom Softwood Sawmillers A

9、ssociation The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Adhesive Tape Manufacturers Association British Footwear Manufacturers Federation British Steel Industry (Wire Section) Packaging Distributors Association Pressure Sensitive Manuf

10、acturers AssociationBS EN 12036 : 1997 BSI 1997 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 12036 3ii BSI 1997 BS EN 12036 : 1997 National foreword This British Standard has been prepared by Technical Committee PKW/3 and is the English languag

11、e version of EN 12036 : 1996 Self-adhesive tapes Solvent penetration into adhesive masking tapes, published by the European Committee for Standardization (CEN). Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr

12、ont cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyr

13、ight reserved to CEN members Ref. No. EN 12036 : 1996 E EUROPEAN STANDARD EN 12036 NORME EUROPE ENNE EUROPA ISCHE NORM May 1996 ICS 83.180 Descriptors: Adhesive tapes, painting, paints, varnishes, solvent resistance tests, penetration, solvents English version Self-adhesive tapes Solvent penetration

14、 into adhesive masking tapes Rubans auto-adhe sifs Mesure de la pe ne tration des solvants dans les rubans adhe sifs de masquage Klebeba nder Eindringen von Lo semitteln in Abdeckklebeba nder This European Standard was approved by CEN on 1996-04-19. CEN members are bound to comply with the CEN/CENEL

15、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CE

16、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN m

17、embers are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 12036 : 1996 BSI 1997 Foreword This European Standard has been prepared

18、 by the Technical Committee CEN/TC 253, Self-adhesive tapes, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 1996, and conflicting national stan

19、dards shall be withdrawn at the latest by November 1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, It

20、aly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Definition 3 3 Principle 3 4 Materials 3 5 Apparatus 3 6 Test sample and test pieces 3 7 Procedure 3 8 Expression of results 4 9 Test report 4Page 3 EN 12036 : 1996

21、 BSI 1997 1 Scope This standard specifies a method to give information regarding the resistance of the adhesive masking tape to paint solvents. 2 Definition For the purposes of this standard, the following definition applies. resistance to solvents The ability of a tape to resist exposure to such co

22、nditions after application and still perform satisfactorily. 3 Principle Examination of a glass plate to which the adhesive masking tape has been applied for evidence of adhesive transfer, after solvents have been applied to the exposed adhesive masking tape surface. 4 Materials 4.1 Solvent mixture

23、no. 1: Butyl acetate 40 volumes Toluene 25 volumes Amyl acetate 10 volumes Butyl alcohol 25 volumes 4.2 Solvent mixture no. 2: Xylene 90 volumes Butyl alcohol 10 volumes 4.3 Cleaning materials: one of the following solvents: methanol; methyl ethyl ketone; acetone; toluene. Solvents shall be of gener

24、al-purpose chemical grade. 4.4 Diacetone alcohol 4.5 Lint-free cotton wool or tissue 5 Apparatus 5.1 Glass plate at least 150 mm long. 5.2 Polished cylindrical metal roller with a diameter of at least 50 mm and a mass corresponding to 2 kg per centimetre width of adhesive tape under test. 5.3 Droppe

25、r to dispense 0,04 ml of solutions. 6 Test sample and test pieces Condition the sample roll for 24 h at 23 C 2C and 50 % 5 % relative humidity. Discard the three outer turns of adhesive tape from the roll before taking test pieces. Take two test pieces at least 300 mm long from each sample roll. 7 P

26、rocedure 7.1 Standard test conditions The test shall be carried out at 23 C 2C and 50 % 5 % relative humidity. 7.2 Preparation of plate Wipe the test surface of the glass plate with a fresh piece of cotton wool or tissue saturated with diacetone alcohol. Dry the plate with fresh cotton wool, then wi

27、pe the test surface with a fresh piece of cotton wool saturated with one of the solvents given in 4.3. Dry the plate with with fresh cotton wool. Maintain the plate at a temperature of 23 C 2 C for at least 5 min before proceeding. 7.3 Application of test pieces Apply a test piece of adhesive tape t

28、o the glass plate so that there are at least 150 mm of adhesive tape on the plate and at least 150 mm overhanging one end. Apply the test piece progressively by gentle longitudinal finger strokes in such a way that the formation of air bubbles between adhesive tape and plate is avoided, without, how

29、ever, exerting appreciable pressure on the adhesive tape. The test piece shall be centred on the plate such that the edge of the test piece is parallel to the long edge of the plate. Pass the roller over the surface of the adhesive tape, to and fro, twice in each direction, at a speed of approximate

30、ly 10 mm/s. Leave the adhesive tape adhered to the plate for 10 min in the standard test conditions and then test as described below. Place five 0,04 ml quantities of solvent mixture no. 1 centrally on the test piece at 25 mm intervals, taking care to prevent the solvent mixture from reaching the ed

31、ges of the adhesive tape. Allow the assembly to stand for 2 h in a draught-free atmosphere at a temperature of 23 C 2 C. 7.4 Stripping of test piece off the plate Remove the test piece from the plate, by pulling the overhanging end so that the test piece peels at right angles to the plate at a speed

32、 of approximately 25 mm in 10 s. 7.5 Make a similar test on a different piece of adhesive tape, using solvent mixture no. 2.Page 4 EN 12036 : 1996 BSI 1997 8 Expression of results Examine the plate and note the number of places on the test surface where a transfer of adhesive has occurred. 9 Test re

33、port The test report shall include the following information: a) a reference to this European Standard; b) all information necessary to identify the test sample; c) the date of the test; d) the results obtained; e) any operation not specified in this European Standard which may influence the results

34、.blankBSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

35、 BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. U

36、sers of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secr

37、etary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buy

38、ing standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published

39、as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which

40、give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benef

41、its contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents

42、Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary det

43、ails such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.