BS EN 60512-11-6-2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11f - Corrosion salt mist《电子设备连接器 试验和测量 气候试验 试验11f 盐雾腐蚀》.pdf

1、BRITISH STANDARD BS EN 60512-11-6: 2002 Connectors for electronic equipment Tests and measurements Part 11-6: Climatic tests Test 11f: Corrosion, salt mist The European Standard EN 60512-11-6:2002 has the status of a British Standard ICS 31.220.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTE

2、D BY COPYRIGHT LAWBS EN 60512-11-6:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 20 May 2002 BSI 20 May 2002 ISBN 0 580 39646 0 Nat

3、ional foreword This British Standard is the official English language version of EN 60512-11-6:2002. It is identical with IEC 60512-11-6:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee E

4、PL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has bee

5、n renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be f

6、ound in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standa

7、rds are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for cha

8、nge, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright date displayed in this do

9、cument indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-11-6 NORME EUROPENNE EUROPISCHE NORM April 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Eur

10、opisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-11-6:2002 E ICS 31.220.10 English version Connectors for electroni

11、c equipment - Tests and measurements Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist (IEC 60512-11-6:2002) Connecteurs pour quipements lectroniques - Essais et mesures Partie 11-6: Essais climatiques - Essai 11f: Corrosion, brouillard salin (CEI 60512-11-6:2002) Steckverbinder fr elektron

12、ische Einrichtungen - Mess- und Prfverfahren Teil 11-6: Klimatische Prfungen - Prfung 11f: Korrosion, Salznebel (IEC 60512-11-6:2002) This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit

13、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thr

14、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnic

15、al committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 61502-11-62:200 - - 2 Foreword The text of document 48B/1147/FDIS, future edition

16、1 of IEC 60512-11-6, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-11-6 on 2002-04-01. The following dates were fixed: latest date b

17、y which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-04-01 Annexes designated “normative“ are part of the body of

18、the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-11-6:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN60512116:2002 BSI22May2002 2egaP 2002:61121506

19、NE 2002yaM22ISB Page2 EN60512116:2002 BSI20May2002-21506-116 2002:CEI 3 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 11-6: Climatic tests Test 11f: Corrosion, salt mist 1 General 1.1 Scope and object This part of IEC 60512, when required by the detail specification, is used for te

20、sting electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this test is to define a standard test method to assess the extent and the effect of a controlled salt-laden atmos

21、phere on the finish of a specimen. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

22、) applies. IEC 60068-2-11:1981, Environmental testing Part 2: Tests Test Ka: Salt mist IEC 60512-1-1: Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination 2 Preparation 2.1 Preparation of the specimen Specimens shall be equipped with th

23、eir normal accessories, mounted as specified in the detail specification. When required by the detail specification, the specimen shall be mated and unmated as many times as specified prior to testing. For each test carried out, the detail specification shall specify the condition of the component,

24、for example mated or unmated. 2.2 Wiring of specimen Specimens shall be wired as specified in the detail specification. 3egaP 2002:61121506NE 2002yaM22ISB Page3 EN60512116:2002 BSI20May2002-21506-116 2002:CEI 4 2.3 Preconditioning Preconditioning shall be of at least 1 h, unless otherwise specified

25、in the detail specification. 3 Test method 3.1 Conditioning This test shall be carried out in accordance with IEC 60068-2-11, Test Ka: Salt mist. The duration of the exposure shall be specified in the detail specification. 3.2 Final measurement Upon completion of the test and after the specimen has

26、been washed with distilled water and dried as specified, it shall be visually examined in accordance with IEC 60512-1-1, Test 1a: Visual examination, with particular attention to the following details: cracking; delamination; pitting of exposed metal surfaces. 4 Details to be specified When this tes

27、t is required by the detail specification, the following details shall be specified: a) method of mounting and wiring the specimen; b) duration of the exposure; c) requirements; d) any deviation from the standard test method. _ 4egaP 2002:61121506NE 2002yaM22ISB Page4 EN60512116:2002 BSI20May2002- -

28、 3 EN 61502-11-62:200 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate

29、places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication r

30、eferred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-11 1981 Environmental testing Part 2: Tests - Test Ka: Salt mist EN 60068-2-11 19

31、99 IEC 60512-1-1 - 1) Connectors for electronic equipment - Tests and measurements Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 2002 2)1)Undated reference. 2)Valid edition at date of issue. Page5 EN60512116:2002 BSI22May2002 5egaP 2002:61121506NE 2002yaM22ISB Page5 EN6051

32、2116:2002 BSI20May2002BS EN 60512-11-6: 2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated

33、by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone findi

34、ng an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service calle

35、d PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standar

36、ds are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of

37、 information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111

38、. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44

39、(0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also

40、 holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, reco

41、rding or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.