BS EN 60794-5-2016 Optical fibre cables Sectional specification Microduct cabling for installation by blowing《光缆 分规范 鼓风装置用微型电缆》.pdf

1、Optical fibre cablesPart 5: Sectional specification Microduct cabling for installation by blowingBS EN 60794-5:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60794-5:2016. It isidentical to IE

2、C 60794-5:2014. It supersedes BS EN 60794-5:2007 which iswithdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibresand cables.A list of organizations represented on this committee can be obtained onrequest to i

3、ts secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83521 6ICS 33.180.10Compliance with a British Standard

4、cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60794-5:2016EUROPEAN STANDARD NORME EUROPENNE E

5、UROPISCHE NORM EN 60794-5 December 2016 ICS 33.180.10 Supersedes EN 60794-5:2007 English Version Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing (IEC 60794-5:2014) Cbles fibres optiques - Partie 5: Spcification intermdiaire - Cblage en micro-con

6、duits pour installation par soufflage (IEC 60794-5:2014) Lichtwellenleiterkabel - Teil 5: Rahmenspezifikation - Mikrorohr-Verkabelung zur Installation durch Einblasen (IEC 60794-5:2014) This European Standard was approved by CENELEC on 2015-11-12. CENELEC members are bound to comply with the CEN/CEN

7、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

8、or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status a

9、s the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

10、xembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung

11、 CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60794-5:2016 E BS EN 60794-5:2016EN 60794-5:2016 2 European foreword The text of document 86A/1588/CDV, future ed

12、ition 2 of IEC 60794-5, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-5:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publicatio

13、n of an identical national standard or by endorsement (dop) 2017-06-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-12-09 This document supersedes EN 60794-5:2007. Attention is drawn to the possibility that some of the elements of this doc

14、ument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-5:2014 was approved by CENELEC as a European Standard without any modification. BS EN 60794-5

15、:2016EN 60794-5:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, onl

16、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on

17、the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test

18、 procedures - Attenuation EN 60793-1-40 - IEC 60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 - IEC 60794-1-1 - Optical fibre cables - Part 1-1: Ge

19、neric specification - General EN 60794-1-1 - IEC 60794-3 - Optical fibre cables - Part 3: Outdoor cables - Sectional specification EN 60794-3 - BS EN 60794-5:2016 2 IEC 60794-5:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations . 5

20、4 Construction 6 4.1 General . 6 4.2 Optical fibre 6 General . 6 4.2.1Attenuation 6 4.2.2Cut-off wavelength . 6 4.2.3Fibre colouring. 6 4.2.4Polarization mode dispersion (PMD) 6 4.2.54.3 Microduct 6 4.4 Protected microduct 7 4.5 Microduct optical fibre cables 7 4.6 Microduct fibre units 7 4.7 Markin

21、g . 8 5 Installation and operating conditions 8 5.1 General . 8 5.2 Installation conditions . 8 5.3 Operating conditions . 8 6 Quality assurance 8 Annex A (informative) Microduct fittings 10 Bibliography 11 BS EN 60794-5:2016IEC 60794-5:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPT

22、ICAL FIBRE CABLES Part 5: Sectional specification Microduct cabling for installation by blowing FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of

23、 IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (P

24、AS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising wi

25、th the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as n

26、early as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in t

27、hat sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committ

28、ees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide

29、 any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest

30、 edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whethe

31、r direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indi

32、spensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794

33、-5 has been prepared by subcommittee 86A Fibres and cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition, published in 2006, and constitutes a technical revision. This edition includes the following significant technical changes with respect

34、 to the previous edition: the addition of constructional requirements, including a reference to IEC 60794-3 for microduct optical fibre cables; the specification has been streamlined by cross-referencing IEC 60794-1-1. BS EN 60794-5:2016 4 IEC 60794-5:2014 IEC 2014 The text of this standard is based

35、 on the following documents: CDV Report on voting 86A/1588/CDV 86A/1620/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list

36、of all parts in the IEC 60794 series, published under the general title Optical fibre cables, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in

37、the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60794-5:2016IEC 60794-5:2014 IEC 2014 5 OPTICAL FIBRE CABLES Part 5: Sectional specification Microduct cabling for installation by blowing 1 Sc

38、ope This part of IEC 60794, which is a sectional specification, specifies the requirements of microduct optical fibre cables, microduct fibre units, microducts and protected microducts for installation by blowing for outdoor and/or indoor use. The microduct optical fibre cables and microduct fibre u

39、nits utilize the structure of the microduct or protected microducts to support installation and to provide protection over the design lifetime. These products may be used for applications such as communication and transmission networks, transmission, telephone and data processing equipment, control

40、and monitoring applications. The cabling structures described in this sectional specification are uniquely designed to facilitate and take advantage of installation by blowing into microducts. IEC TR 62839-1 gives rules to build an environmental declaration, if needed. 2 Normative references The fol

41、lowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60304, Sta

42、ndard colours for insulation for low-frequency cables and wires IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-1-44, Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength IEC 60793-2, Optical fibres Part 2: Produ

43、ct specifications General IEC 60794-1-1, Optical fibre cables Part 1-1: Generic specification General IEC 60794-3, Optical fibre cables Part 3: Outdoor optical fibre cables Sectional specification 3 Terms, definitions, symbols and abbreviations For the purposes of this document, the terms, definitio

44、ns, symbols and abbreviations are given in IEC 60794-1-1. BS EN 60794-5:2016 6 IEC 60794-5:2014 IEC 2014 4 Construction 4.1 General The intent is that the microduct optical fibre cables, microduct fibre units, microducts and protected microducts shall be designed and manufactured for a predicted ope

45、rating lifetime of at least 20 years. The tests of this specification are intended to assess the performance of cables as manufactured and under agreed ageing and performance-limit tests. These tests are not intended to define end-of-life performance, but may be used as agreed between the customer a

46、nd the supplier to predict such performance. It shall be possible to install or remove the microduct optical fibre cable or microduct fibre unit in or from the microducts by blowing during the operational lifetime. When considering recovering a product for potential re-use, care shall be taken to mi

47、nimize stress on the product and that the product is carefully handled and packaged in accordance with the suppliers guidelines. Good practice would also indicate that all products are appropriately tested if re-deployed. The materials in the microduct optical fibre cable, microduct fibre unit, micr

48、oduct or protected microduct shall not present a health hazard within its intended use. 4.2 Optical fibre General 4.2.1The optical fibre shall conform to the requirements of IEC 60793-2. The fibre type shall be agreed between the customer and supplier. Attenuation 4.2.2Attenuation coefficient 4.2.2.

49、1The typical maximum attenuation coefficient of a microduct optical fibre cable or microduct fibre unit is dependent upon the fibre type(s) used. Typical values are given in IEC 60794-1-1. Particular values may be agreed between the customer and supplier. The attenuation coefficient shall be measured in accordance with IEC 60793-1-40. Attenuation discontinuities 4.2.2.2Point discontinuities shall conform to IEC 60794-1-1. Cut-off wavelength 4.2.3For single-mode f