BS ISO 19026-2015 Accessible design Shape and colour of a flushing button and a call button and their arrangement with a paper dispenser installed on the wall in public restroom《无障.pdf

1、BSI Standards PublicationBS ISO 19026:2015Accessible design Shape andcolour of a flushing buttonand a call button, and theirarrangement with a paperdispenser installed on the wallin public restroomBS ISO 19026:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of IS

2、O 19026:2015.The UK participation in its preparation was entrusted to TechnicalCommittee CH/173, Assistive products for persons with disability.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necess

3、aryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 86996 9ICS 13.180; 91.040.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standar

4、d was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 19026:2015 ISO 2015Accessible design Shape and colour of a flushing button and a call button, and their arrangement

5、with a paper dispenser installed on the wall in public restroomConception accessible Forme et couleur dun bouton de rinage et dun bouton dappel, et leur combinaison avec un distributeur de papier install sur le mur de toilettes publiquesINTERNATIONAL STANDARDISO19026First edition2015-12-15Reference

6、numberISO 19026:2015(E)BS ISO 19026:2015ISO 19026:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, ele

7、ctronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Verni

8、er, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 19026:2015ISO 19026:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Figuration of a flushing button and a call button . 25 Colour and contrast of a flushi

9、ng button and a call button 25.1 Colours of buttons 25.2 Contrast between the colours of a flushing button and a call button and the surrounding colours . 26 Arrangement of a flushing button, a call button, and a paper dispenser 2 ISO 2015 All rights reserved iiiContents PageBS ISO 19026:2015ISO 190

10、26:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for

11、which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on al

12、l matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. Th

13、is document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or

14、 all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users

15、and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary

16、informationThe committee responsible for this document is ISO/TC 173, Assistive products for persons with disability, Subcommittee SC 7, Accessible design.iv ISO 2015 All rights reservedBS ISO 19026:2015ISO 19026:2015(E)IntroductionRegarding public restrooms, products for the facility have been impr

17、oved and new functions have been added in toilet compartments which make public restrooms more accessible to users. On the other hand, types of operating buttons have been diversified and they are placed in random locations. Also, operating methods have been diversified and the difficulty of discrim

18、ination and the use of the buttons have been raised as an issue. As users use toilet compartments alone in most cases unless s/he needs an attendant, it is impossible to ask someone the whereabouts of a flushing button and a call button or ask for help. Especially, persons with visual disabilities h

19、ave difficulty to find a flushing button and a call button when the arrangement of these buttons differs with places. This problem is not limited only to persons with disabilities, but also to older persons. This International Standard aims to solve problems which older persons and persons with disa

20、bilities encounter when they use public restrooms. ISO 2015 All rights reserved vBS ISO 19026:2015BS ISO 19026:2015Accessible design Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom1 ScopeThis International

21、 Standard specifies shapes and colours of a flushing button and a call button of lavatory which are installed on the wall and their arrangement with a paper dispenser. This International Standard is only applicable in case of installing a flushing button and/or a call button on the wall of seat-type

22、 lavatory in public restrooms (general toilet compartments and toilet compartments with various functions) used by an unspecified large number of people, except restrooms with a big paper holder where it is difficult to place a flushing button and a call button above the holder, and Type A toilet wi

23、th lateral transfer from both sides of ISO 21542.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

24、 of the referenced document (including any amendments) applies.ISO 21542:2011, Building construction Accessibility and usability of the built environment3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1public restroomrestroom used by an unspecifi

25、ed large number of people, installed in highly public buildings and facilities such as railroad stations, airports, parks, assembly halls, hospitals, department stores, hotels, and offices3.2general toilet compartmentcompartment set up with seat-type lavatory without special consideration for wheelc

26、hair users3.3toilet compartment with various functionslarge compartment set up with seat-type lavatory with consideration for wheelchair users and babies and/or small children3.4flushing buttonpush-button switch of toilet flushing equipment3.5call buttonpush-button switch for assistance alarm3.6pape

27、r dispenserequipment to house toilet paperINTERNATIONAL STANDARD ISO 19026:2015(E) ISO 2015 All rights reserved 1BS ISO 19026:2015ISO 19026:2015(E)4 Figuration of a flushing button and a call buttonThe figuration of a flushing button shall be a round or oval shape. The figuration of a call button sh

28、all be easily distinguishable from the flushing button (for example, quadrangle, rectangle, or triangle) by touch. The sizes of a flushing button and a call button shall be easy to push by a finger, as well as a palm or top of a hand.The height of a button should be stuck out from the surrounding su

29、rface so that persons with visual disabilities can recognize the button by the touch.5 Colour and contrast of a flushing button and a call buttonThe colours of a flushing button and a call button and its contrast with the surrounding colours are defined as follows.NOTE The surrounding mentioned in t

30、his International Standard is the area adjacent to a flushing button and a call button.5.1 Colours of buttonsThe colours of a flushing button and a call button shall be different enough to be distinguishable from each other.NOTE A call button is usually coloured in red because it is used for the pur

31、pose of assistance alarm.5.2 Contrast between the colours of a flushing button and a call button and the surrounding coloursThe contrast between the colours of a flushing button and a call button and the surrounding colours shall be retained. (See visual contrast in ISO 21542:2011, B.7).6 Arrangemen

32、t of a flushing button, a call button, and a paper dispenserArrangement of a flushing button, a call button, and a paper dispenser is defined as follows:a) a flushing button, a call button, and a paper dispenser shall be arranged in a way that most users can operate and users with visual disabilitie

33、s can recognize easily. Various postures such as sitting and standing shall be taken into consideration;b) a flushing button, a call button, and a paper dispenser shall be arranged in a group on either side of the wall;c) a flushing button shall be installed on the upper side of a paper dispenser. A

34、 call button shall be placed at the same height as a flushing button and placed toward the rear of a toilet seat;d) a flushing button, a call button, and a paper dispenser should be established in the position that satisfies the conditions given in Figure 1 and Table 1;e) if other pieces of equipmen

35、t such as a handrail, a remote controller for washing equipment with warm water, and/or a wash basin are installed on the same surface of the wall with a flushing button, a call button, and a paper dispenser, those pieces of equipment shall be arranged in a way that they do not interfere the use and

36、 operation of a flushing button, a call button, and a paper dispenser;f) even if the dimensions do not conform to Figure 1 and Table 1 due to the figuration of a paper dispenser or the surface condition of the side wall of the compartment, the positional relationship described in c) shall be maintai

37、ned;g) another call button or a pull cord should be placed at the minimum height of 100 mm and towards the front side of the flushing button in places where users can operate it easily even in a fallen posture.2 ISO 2015 All rights reservedBS ISO 19026:2015ISO 19026:2015(E)ToiletabcdX1X2X3Y1Y3Y2Keya

38、Call button.bFlushing button.cPaper dispenser.dTip of the upper surface of a toilet seat.Figure 1 Arrangement of a flushing button, a call button, and a paper dispenserTable 1 Arrangement and sizes of a flushing button, a call button, and a paper dispenserDimensions in millimetresEquipmentHorizontal

39、 distance from the tip of the upper surface of a toilet seat (base point)Perpendicular distance from the tip of the puper surface of a toilet seat (base point)Distance between the twoPaper dispenserX1: Toward the head of a toilet seat:Approx 0 to 100Y1: Toward the head of a toilet seatApprox 150 to

40、400Flushing buttonY2: Toward the head of a toilet seat:Approx 400 to 550Y3: Approx 100 to 200(Perpendicular distance from a paper rolling equipment)Call buttonX2: Toward the rear of a toilet seat:Approx 100 to 200X3: Approx 200 to 300Horizontal distance from a flushing button ISO 2015 All rights res

41、erved 3BS ISO 19026:2015ISO 19026:2015(E) ISO 2015 All rights reservedICS 91.040.10; 13.180Price based on 3 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporate

42、d by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others t

43、o shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help th

44、em achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF ve

45、rsions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Custome

46、r Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international sta

47、ndards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member

48、. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licen

49、ce (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit