CSA C22 2 NO 184-2015 Solid-state lighting controls (Fourth Edition).pdf

1、C22.2 No. 184-15Solid-state lighting controlsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing vari

2、ed viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis

3、 document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third p

4、artys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVE

5、NT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES

6、, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEE

7、N ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to anoth

8、er person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this docum

9、ent.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA

10、 Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets th

11、at may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intelle

12、ctual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the p

13、ossibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely thei

14、r own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole pur

15、pose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy

16、.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and condition

17、s contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards

18、 Update ServiceC22.2 No. 184-15February 2015Title: Solid-state lighting controlsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423561.If you require

19、assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.ISBN 978-1-77139-865-7 2015 CSA Group All rights reserved. No part of this publication may be reproduced in any form wh

20、atsoever without the prior permission of the publisher.Published in February 2015 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1

21、-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Solid-state lighting controlsC22.2 No. 184-15C22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 1ContentsTechnical Committee on Wiring Products 3Integrated Committee o

22、n Wiring Devices 5Preface 81 Scope 92 Reference publications 103 Definitions 114 General requirements 114.1 General 114.2 Rating 115 Construction 125.1 General 125.2 Disconnecting means 125.3 Lighting control circuits 135.4 Spacings 135.5 Supply connections 135.6 External sensing leads 145.7 Electro

23、nic circuits 145.8 Accessibility of live parts 156 Marking 157 Tests 167.1 General 167.2 Overload 177.3 Endurance 187.4 Temperature 187.5 Dielectric strength 197.6 Strain relief 197.7 Leakage current 207.8 Limited short-circuit 207.9 Printed circuit board coatings 217.9.1 General 217.9.2 Dielectric

24、strength test on new specimen 217.9.3 Dielectric strength test after aging 217.9.4 Dielectric strength test after humidity conditioning 227.9.5 Adhesion 227.10 Moisture absorption resistance of insulating barriers, fibre liners, or similar materials 227.11 Lighting controls controlling ballasted loa

25、ds 227.12 Mould stress 237.13 Component failure test 23C22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 2Annex A (informative) Flow chart for testing of lighting controls (including the number of controls to be tested) 30C22.2 No. 184-15Solid-state lighting controlsFebruary

26、2015 2015 CSA Group 3Technical Committee on Wiring ProductsK.L. Rodel Hubbell Canada LP, Pickering, Ontario Category: Producer InterestChairP. Desilets Leviton Manufacturing of Canada Limited, Pointe-Claire, Qubec Category: Producer InterestVice-ChairW.J. Bryans Electro-Federation Canada, Toronto, O

27、ntario AssociateW.J. Burr Burr and Associates, Campbell River, British Columbia Category: General InterestC. Davis Electro Cables Incorporated, Trenton, Ontario Category: Producer InterestS.W. Douglas International Association of Electrical Inspectors, Toronto, Ontario Category: General InterestD. D

28、rysdale Nexans Canada Inc, Milton, Ontario Category: Producer InterestS.P. Hawkins Shawflex A Division of ShawCor Ltd., Toronto, Ontario AssociateR.J. Kelly Government of Nunavut-Dept of Community b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible

29、, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.

30、ca.5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the su

31、bject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 9C22.2 No. 184-15Solid-state lighting controls1 Scope1.1 This Stand

32、ard applies to solid-state lighting controls rated at 600 V and less, with or without an integral switching (disconnecting) device, designed to be used in circuitsa) for the control of incandescent lamps; andb) for the control of fluorescent, HID, ballasted, and similar lamps intended for installati

33、on in accordance with the Rules of the Canadian Electrical Code, Part I.1.2 This Standard applies to controls intended fora) lighting controls without integral switching (disconnecting control);b) devices used as a table-mounted unit to which portable luminaires can be temporarily connected;c) devic

34、es permanently installed in the supply line of a lamp;d) direct plug-in devices; ande) other similar applications.Note: Refer to CSA C22.2 No. 184.1 for flush-mounted dimmers and similar devices.1.3 This Standard does not apply to variable resistor and variable transformer-type controls.1.4 Control

35、devices containing phase cut dimmers may be optionally tested and marked in accordance with standard NEMA SSL 7A.1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a r

36、ecommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separat

37、e from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.1.6 The values given in SI units are th

38、e units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.C22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 102 Reference publicationsThis Standard refers to the following publications, and where such referenc

39、e is made, it shall be to the edition listed below, including all amendments published thereto.CSA GroupCAN3-C235-83 (R2010) Preferred voltage levels for AC systems, 0 to 50 000 VC22.1-15 Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10 General requirements Canadian Electrical Code, Part IIC22

40、.2 No. 0.2-93 (R2013) Insulation coordinationCAN/CSA-C22.2 No. 0.17-00 (R2013) Evaluation of properties of polymeric materialsC22.2 No. 43-08 (R2013) LampholdersC22.2 No. 55-M1986 (R2012) Special use switchesCAN/CSA-C22.2 No. 74-96 (R2010) Equipment for use with electric discharge lampsC22.2 No. 111

41、-10 General-use snap switchesC22.2 No. 184.1-96 (R2011) Solid-state dimming controlsC22.2 No. 188-13 Splicing wire connectorsC22.2 No. 265-12 Out of parameter circuit interrupter (OPCI)ANSLG (American National Standard Lighting Group)C82.11-2011 High-Frequency Fluorescent Lamp BallastsC82.14-2006 La

42、mp Ballasts Low-Frequency Square Wave Electronic Ballasts For Metal Halide LampsC22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 11CGSB (Canadian General Standards Board)67-GP-7M-1978 (withdrawn) Cotton; Absorbent, Sterile and NonsterileNEMA (National Electrical Manufacturer

43、s Association)410-2011 Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and DischargeSSL 7A-2013 Phase Cut Dimming for Solid State Lighting Basic Compatibility3 DefinitionsThe following definitions shall apply in this Standard.Dimmer a control intended to chang

44、e lighting loads to various intensities. Phase cut dimmer a control unit that produces a forward phase (leading edge) AC waveform. This dimmer output waveform is supplied to one or more LLEs. The conduction angle of the waveform is adjustable.Type I dimmer a dimmer in which the ON-OFF function is in

45、dependent of the output voltage setting.Type II dimmer a dimmer in which the ON-OFF function can be operated at the minimum output voltage setting only.Type III dimmer a dimmer incorporating solid-state components to provide one or more pre- established settings (but not an infinite number of positi

46、ons of control).LED light engine or lamp (LLE) a combination of one electronic control gear and one or more LED modules. The gear and LED modules may be integrated into a single unit.Solid-state lighting control (control) a device intended to control power flow to a lighting load by means of a devic

47、e such as a thyristor, magnetic amplifier, or similar device.4 General requirements4.1 GeneralGeneral requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0.4.2 Rating4.2.1 Dimmers shall be rated in V ac, 60 Hz, and watts. The wattage rating shall be not less than 300 W and shall

48、be a whole number multiple of 100 W, except for dimmers intended for use with portable luminaires, where the minimum shall be not less than 150 W. The voltage ratings shall be the preferred ratings specified in CSA CAN3-C235.C22.2 No. 184-15Solid-state lighting controlsFebruary 2015 2015 CSA Group 1

49、24.2.2 A lighting control intended for general use with electronic ballasts, self-ballasted compact fluorescent lamps, and LED drivers, having a rated current (steady-state current) and rated voltage in accordance with Table 2, shall be marked in accordance with Clause 6.1(d).5 Construction5.1 General5.1.1 Electric component parts of lighting controls shall be of a type specifically approved for the use intended or shall be investigated as an integral part of, and with, the lighting control.5.1.2 When electrical equipment covered by a part