CSA Z262 1-2015 Ice hockey helmets (Sixth Edition Incorporating Errata December 2015).pdf

1、Z262.1-15Ice hockey helmetsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and i

2、nterests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided

3、 without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intellectual prop

4、erty rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS V

5、OLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS IN

6、TERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF

7、SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The informat

8、ion in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-

9、profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this documen

10、t (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in this document,

11、whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and may give rise to a ri

12、ght in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of th

13、is standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this

14、documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this

15、document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit

16、 others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not

17、load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceZ262.1-15March 2015Title: Ice hoc

18、key helmetsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423575.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-223

19、3.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.ISBN 978-1-77139-885-5 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in

20、March 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards As

21、sociation, operating as “CSA Group”Ice hockey helmetsZ262.1-15Z262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 1ContentsTechnical Committee on Equipment and Facilities for Ice Hockey 3Subcommittee on Equipment and Facilities for Ice Hockey 6Preface 101 Scope 112 Reference publications 123 Defini

22、tions 124 Materials 144.1 Documentation 144.2 General 144.3 Cleaners 144.4 Finishes 144.5 Non-irritants 154.6 Adhesives 154.7 Polymeric changes 155 Construction 155.1 Sharp edges 155.2 Attachment system 155.2.1 General 155.2.2 Eye and full-face protectors 155.3 Protected area 155.3.1 Minimum protect

23、ed area 155.3.2 Ear aperture 155.3.3 Ventilation openings 165.4 Test blade penetration 165.5 Shock-absorbing capacity 165.6 Retention system 165.6.1 Straps 165.6.2 Extensibility and strength 165.7 Field of view 166 Test methods 166.1 Sampling 166.1.1 General 166.1.2 Quantity 166.2 Conditioning 166.2

24、.1 Ambient conditioning 166.2.2 Low-temperature conditioning 176.2.3 Elevated-temperature conditioning 176.2.4 Testing conditioned helmets 176.3 Headform size and helmet positioning index (HPI) 17Z262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 26.4 Coverage 176.5 Determination of penetration ch

25、aracteristics 176.5.1 Test apparatus 176.5.2 Procedure 176.6 Determination of shock-absorbing capacity 176.6.1 Apparatus 176.6.2 Impact sites 186.6.3 Procedure 186.7 Retention system function 196.7.1 Apparatus 196.7.2 Positioning 196.7.3 Extensibility and releasing force 197 Test report 198 Required

26、 markings 208.1 General 208.2 Information 208.3 Warning 209 Instructions for use 20Annex A (normative) Impact drop test using a guided monorail device 28Annex B (informative) Field of view test methods 31Z262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 3Technical Committee on Equipment andFacili

27、ties for Ice HockeyT. Jackson Hockey Canada,Ottawa, OntarioCategory: Regulatory AuthorityChairP.J. Bishop PJB Consulting,Elmira, OntarioCategory: General InterestVice-ChairJ. Banfield Sunnybrook Health Sciences Centre,Toronto, OntarioCategory: User InterestJ. Berman National Hockey League,New York,

28、New York, USAAssociateT. Calabro Otny Enterprises Ltd.,Mississauga, OntarioCategory: Producer InterestS.A. Copeland Humanscope,Barrie, OntarioCategory: General InterestJ.S. Delaney McGill Sport Medicine Clinic,Montral, QubecAssociateM. FafardMinistre de lducation, du Loisir et du Sport,Trois-Riviere

29、s, QubecCategory: Regulatory AuthorityJ.P. Ferrero Bureau de Normalisation du Qubec (BNQ),Qubec, QubecAssociateM.C. Gnreux Bauer Hockey Corp.,Blainville, QubecCategory: Producer InterestT. Goodier Health Canada,Ottawa, OntarioAssociateZ262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 4J. Grand Na

30、tional Hockey League,New York, New York, USAAssociateM.S. Granger Granger Legal Consulting,Schroon Lake, New York, USAAssociateS. Guo CSA Group,Toronto, OntarioAssociateK. Hall Tanall Sales Ltd.,Lac Tremblant Nord, QubecCategory: General InterestN. Henderson Easton Bell Sports,Van Nuys, California,

31、USAT.B. Hoshizaki University of Ottawa School of Human Kinetics,Ottawa, OntarioAssociateO. Jajko Warrior Sports,Saint-Laurent, QubecK. King National Hockey League,Toronto, OntarioCategory: General InterestJ.F. Laperriere Bauer Hockey Corp.,Blainville, QubecAssociateM. Marz Cortex Armour Inc.,Laval,

32、QubecAssociateS. McCarthy CSA Group,Independence, Ohio, USAAssociateW. Meeuwisse University of Calgary Sport Medicine Centre,Calgary, AlbertaAssociateC. Miller Canadian Lacrosse Association,Guelph, OntarioAssociateN. Muller Ringette Canada,Ottawa, OntarioCategory: User InterestZ262.1-15Ice hockey he

33、lmetsMarch 2015 2015 CSA Group5D. Pearsall McGill University,Montral, QubecAssociateD.B. Pfriem ICS Laboratories Inc.,Brunswick, Ohio, USAAssociateS.D. Pfriem ICS Laboratories Inc.,Brunswick, Ohio, USAAssociateA. Post University of Ottawa,Ottawa, OntarioAssociateJ. Potter Pro Skate Corner,Toronto, O

34、ntarioCategory: General InterestP. Richard CSA Group,Pointe-Claire, QubecAssociateF. Rider Ontario Womens Hockey Association,Mississauga, OntarioCategory: User InterestD.G. Roy Health Canada,Ottawa, OntarioCategory: Regulatory AuthorityD. Rudd Bauer Hockey Corp.,Blainville, QubecAssociateE. Spyrou R

35、eebok-CCM Hockey,Saint-Laurent, QubecL. Weber Bauer Hockey Corp.,St-Jrome, QubecAssociateH.A. Winston Centre for Health b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will

36、address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five years from the date of publicatio

37、n. Suggestions for its improvement willbe referred to the appropriate committee. To submit a proposal for change, please send the followinginformation to inquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number);b) relevant clause, table, and/or fig

38、ure number;c) wording of the proposed change; andd) rationale for the change.Z262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 11Z262.1-15Ice hockey helmets1 Scope1.1This Standard specifies performance requirements and test methods for helmets marketed, sold, andintended for ice hockey. Such helm

39、ets can also be used for lacrosse and ringette.1.2The intent of this Standard is to reduce the risk of focal injury to the head without compromising theform or appeal of the game. This reduction of risk is based on the use of the helmeta) as intended within the rules of the game; andb) in accordance

40、 with the manufacturers instructions.Note: Ice hockey is a sport in which there is a risk of injury. Helmets meeting the requirements of this Standardafford no protection from neck or spinal injuries. Severe head, brain, or spinal injuries, including paralysis or death,can occur in spite of using a

41、helmet certified to this Standard.1.3This Standard specifies requirements for the following items as they relate to ice hockey helmets:a) construction;b) penetration;c) shock absorption;d) retention systems;e) field of view;f) markings; andg) user information1.4This Standard covers helmets that are

42、intended for use bya) ice hockey players;b) ice hockey goalkeepers; andc) certain on-ice functionaries (e.g., referees, coaches).1.5In Standard,“shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfyin order to comply with the standard; “should” is used to exp

43、ress a recommendation or that which isadvised but not required; and “may” is used to express an option or that which is permissible within thelimits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of anote accompanying a clause is to se

44、parate from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written asrequirements.Z262.1-15Ice hockey helmetsMarch 2015 2015 CSA Group 12Annexes are designated normative (mandatory) or informative (non-mandatory) to defi

45、ne theirapplication.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to theedition listed below, including all amendments published thereto.CSA GroupZ262.2-15Face protectors for use in ice hockeyZ262.6-14Specification for facia

46、lly featured headformsCEN (European Committee for Standardization)960: 2006Headforms for use in the testing of protective helmetsISO (International Organization for Standardization)6487:2012Road Vehicles Measurement techniques in impact tests Instrumentation3 DefinitionsThe following definitions sha

47、ll apply in this Standard:Acceleration the rate of change of velocity measured in metres per second squared (m/s2) in unitsof g.Acceleration due to gravity the rate of change in velocity due to the force of gravity, whereg = 9.8 m/s2.Central vertical axis the line relative to the headform that lies

48、in the median plane of symmetry andthat is normal to the basic plane at a point equidistant from the front and back of the headform.Drop height the vertical distance from the impact point of the elevated helmet to the impact surfaceon a drop test apparatus.Fastening system the devices used to connec

49、t the components of a helmet.Field of view a projection outward of all retinal points (the nervous layer of the eye) at which visualsensations can be initiated. For the purposes of this Standard, the term “field of view” is oval-shapedand extendsa) 90 in the temporal direction; andb) 35 in the superior direction.Field of view directionsTemporal an angle in the horizontal plane measured from the primary position of gaze to theright for the right eye and from the primary position of gaze to the left for the left eye.