CSA Z341 4-2014 Salt cavern waste disposal (First Edition).pdf

1、Z341.4-14Salt cavern waste disposalLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoi

2、nts and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document

3、is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys inte

4、llectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL

5、CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST RE

6、VENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED

7、 OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person

8、 or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA

9、Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group

10、and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may

11、be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual p

12、roperty and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibil

13、ity that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own r

14、esponsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGI

15、TsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ it is necessary to exercise competent engineering judgment in conjunction with its use.Annex A provides commentary that complements and clarifies the clauses of this Standard.The requirements of the Series are adequate under conditions nor

16、mally encountered in the storage industry. Requirements for abnormal or unusual conditions are not specifically addressed, and complete details of engineering and construction are not provided. It is intended that all work performed within the scope of the Series will meet or exceed the safety stand

17、ards expressed or implied in the Series. It is possible that changes will have to be made based on new experience or technology, or both. When necessary, amendments will be issued by CSA Group.This Standard was prepared by the Technical Committee on Storage in Underground Formations, under the juris

18、diction of the Strategic Steering Committee on Petroleum and Natural Gas Industry Systems, and has been formally approved by the Technical Committee.Notes: (1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this

19、 Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.(3) This Standard was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice

20、 for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this Standard.(

21、4) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.org and include “Request for interpretation” in the subject line:(a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative ske

22、tch;(b) provide an explanation of circumstances surrounding the actual field condition; and(c) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines gov

23、erning standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.(5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for chan

24、ge, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change. 2014 CSA Group Salt cavern

25、waste disposalDecember 2014 1Z341.4-14Salt cavern waste disposal1Scope1.1This Standard sets out the minimum requirements for the design, construction, operation, maintenance, abandonment, and safety of wells and associated equipment used to inject waste into underground salt caverns in a slurry form

26、. The equipment considered includes(a) wellhead and Christmas tree assemblies;(b) wells and subsurface equipment; and(c) safety equipment, including monitoring, control, and emergency shutdown systems.Note: The scope of this Standard is illustrated in Figure 1.1.2Wastes within the scope of this Stan

27、dard are substances generated from the exploration, production, drilling, completion, abandonment, processing, refining, transmission, or use of petroleum or petroleum products.Note: Examples include(a) drilling mud;(b) drill cuttings;(c) completion and stimulation waste;(d) produced sands;(e) tank

28、bottoms;(f) crude oil-contaminated soil;(g) salt-contaminated soil;(h) brine pond bottoms;(i) water treatment sludge; and(j) blowdown from water coolers or steam generators.1.3This Standard does not apply to(a) underground disposal in overburden materials involving the use of tanks or membranes, suc

29、h as landfills;(b) design and fabrication of pressure vessels that are covered by pressure vessel codes;(c) heat exchangers, pumps, compressors, and piping in processing plant facilities, manufacturing plants, or industrial plants that are covered by appropriate codes;(d) gathering lines, flow lines

30、, metering, compressors, and associated surface equipment beyond the first emergency shutdown valve (ESV) or block valve;(e) radioactive fuel wastes;(f) biological wastes;(g) wastes that have a pH less than 4.5 or greater than 12.5;(h) wastes that have a flash point less than 60.5 C; and(i) wastes c

31、ontaining hydrogen sulphide in concentrations greater than 10 mol/kmol.1.4It is not the intent of this Standard to prevent the development of new equipment or practices, nor to prescribe how such innovations should be handled.Z341.4-14 2014 CSA Group2 December 20141.5Where the requirements of this S

32、tandard differ from the requirements of other Standards or Codes referenced herein, the requirements of this Standard take precedence.1.6The requirements of this Standard do not apply retroactively to existing installations and installations under construction at the time of publication, but they do

33、 apply to the extension, replacement, maintenance, and upgrading of such installations.1.7In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which

34、 is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory

35、 or informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.2 Reference publicationsThis Standard refers to the following pub

36、lications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.CSA GroupC22.1-12Canadian Electrical Code, Part ICAN/CSA-Z662-11Oil and gas pipeline systemsZ731-03 (R2014)Emergency preparedness and responseAPI (American Petroleum Insti

37、tute)RP 5B1 (R2010)Gauging and Inspection of Casing, Tubing, and Pipe Line ThreadsRP 5C1 (R2010)Recommended Practice for Care and Use of Casing and TubingBulletin 5C2 (1999) (withdrawn)Performance Properties of Casing, Tubing, and Drill PipeANSI/API Specification 6A (2010)Specification for Wellhead

38、and Christmas Tree EquipmentANSI/API Specification 6D (2014)Specification for Pipeline and Piping Valves 2014 CSA Group Salt cavern waste disposalDecember 2014 3ANSI/API RP 14E (1991, R2013)Recommended Practice for Design and Installation of Offshore Products Platform Piping SystemsStandard 2510 (20

39、01, R2011)Design and Construction of Liquefied Petroleum Gas (LPG) InstallationsPublication 2510A (1996, R2010)Fire-Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage FacilitiesAPI/ISO (American Petroleum Institute/International Organization for Standardi

40、zation)RP 5A3/ISO 13678 (2009)Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem ElementsRP 5A5/ISO 15463 (2005, R2010)Field Inspection of New Casing, Tubing, and Plain-end Drill PipeSpecification 5CT/ISO 11960 (2011)Specification for Casing and TubingASME (Americ

41、an Society of Mechanical Engineers)B31.3-2012Process PipingNACE International (National Association of Corrosion Engineers)SP0186-2007Application of Cathodic Protection for External Surfaces of Steel Well CasingsNACE International/ISO (National Association of Corrosion Engineers/International Organi

42、zation for Standardization)ANSI/MR0175/ISO 15156-2009Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Parts 1, 2 and 3Other publicationsBerest, P., Brouard, B., and Durup, G., “Tightness Tests in Salt Cavern Wells”, Spring SMRI Meeting,

43、2002.Crotogino, F., SMRI Reference for External Well Mechanical Integrity Testing/Performance, Data Evaluation and Assessment, Solution Mining Research Institute, 1995.Heitman, N.A., “Experience with Cavern Integrity Testing Using Nitrogen Gas”, Spring SMRI Meeting, 1987.Kansas Department of Health

44、and Environment, Nitrogen/Brine Interface Mechanical Integrity Test (MIT), Procedure #: UICLPG-20, 2006.3 DefinitionsThe following definitions shall apply in this Standard:Abandoned well a well whose use has been permanently discontinued and which has been plugged.Annulus the space between two casin

45、gs, between a casing and tubing, or between a casing and the adjacent formations.Blind flange a flange with no orifice or portal through which fluids can flow.Z341.4-14 2014 CSA Group4 December 2014Block valve a valve on a pipeline system that is located so as to isolate sections of pipeline during

46、maintenance or in the event of leaks or failures.Blowdown the controlled release or open flow venting of hydrocarbons, commonly done in surface facilities or wells.Blowout the uncontrolled flow of fluids from a well.Blowout preventer (BOP) a stack or assembly of valves attached to the top of the cas

47、ing during drilling, completions, or workover operations to control well pressure and prevent a blowout.Bottom-hole the lowermost portion of a well.Brine saline water that naturally occurs in porous rock formations or fluid resulting from the dissolution of salt formations with fresh water for the p

48、urposes of salt solution mining.Caprock a hard, impervious formation that forms a cap over a disposal cavern and prevents the upward migration of fluids from the disposal zone.Casing metallic pipe placed in the borehole to support the sides of the borehole and to act as a barrier preventing subsurfa

49、ce migration of fluids out of or into the borehole.Surface casing a pipe placed into the borehole and cemented into place for the purposes of well control and the protection of usable safe drinking water (USDW) formations from damage during drilling, mining, production and disposal operations.Intermediate casing a pipe placed into the borehole inside the surface casing and